Lines Matching +full:iovcc +full:- +full:supply
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
7 /dts-v1/;
8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/input/input.h>
10 #include <dt-bindings/pinctrl/rockchip.h>
14 model = "ODROID-GO Advance";
15 compatible = "hardkernel,rk3326-odroid-go2", "rockchip,rk3326";
22 stdout-path = "serial2:115200n8";
25 adc-joystick {
26 compatible = "adc-joystick";
27 io-channels = <&saradc 1>,
29 #address-cells = <1>;
30 #size-cells = <0>;
34 abs-flat = <10>;
35 abs-fuzz = <10>;
36 abs-range = <172 772>;
42 abs-flat = <10>;
43 abs-fuzz = <10>;
44 abs-range = <278 815>;
50 compatible = "pwm-backlight";
51 power-supply = <&vcc_bl>;
56 compatible = "simple-battery";
57 charge-full-design-microamp-hours = <3000000>;
58 charge-term-current-microamp = <300000>;
59 constant-charge-current-max-microamp = <2000000>;
60 constant-charge-voltage-max-microvolt = <4200000>;
61 factory-internal-resistance-micro-ohms = <180000>;
62 voltage-max-design-microvolt = <4100000>;
63 voltage-min-design-microvolt = <3500000>;
65 ocv-capacity-celsius = <20>;
66 ocv-capacity-table-0 = <4046950 100>, <4001920 95>, <3967900 90>, <3919950 85>,
74 gpio-keys {
75 compatible = "gpio-keys";
76 pinctrl-names = "default";
77 pinctrl-0 = <&btn_pins>;
80 * *** ODROIDGO2-Advance Switch layout ***
81 * |------------------------------------------------|
83 * |------------------------------------------------|
84 * | sw1 |-------------------| sw8 |
88 * | |-------------------| |
90 * |------------------------------------------------|
93 button-sw1 {
95 label = "DPAD-UP";
98 button-sw2 {
100 label = "DPAD-DOWN";
103 button-sw3 {
105 label = "DPAD-LEFT";
108 button-sw4 {
110 label = "DPAD-RIGHT";
113 button-sw5 {
115 label = "BTN-A";
118 button-sw6 {
120 label = "BTN-B";
123 button-sw7 {
125 label = "BTN-Y";
128 button-sw8 {
130 label = "BTN-X";
133 button-sw9 {
138 button-sw10 {
143 button-sw11 {
148 button-sw12 {
153 button-sw13 {
158 button-sw14 {
163 button-sw15 {
165 label = "TOP-LEFT";
168 button-sw16 {
170 label = "TOP-RIGHT";
175 leds: gpio-leds {
176 compatible = "gpio-leds";
177 pinctrl-names = "default";
178 pinctrl-0 = <&blue_led_pin>;
180 blue_led: led-0 {
183 linux,default-trigger = "heartbeat";
187 rk817-sound {
188 compatible = "simple-audio-card";
189 simple-audio-card,name = "Analog";
190 simple-audio-card,format = "i2s";
191 simple-audio-card,hp-det-gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>;
192 simple-audio-card,mclk-fs = <256>;
193 simple-audio-card,widgets =
197 simple-audio-card,routing =
203 simple-audio-card,codec {
204 sound-dai = <&rk817>;
207 simple-audio-card,cpu {
208 sound-dai = <&i2s1_2ch>;
213 compatible = "regulator-fixed";
214 regulator-name = "vcc3v8_sys";
215 regulator-always-on;
216 regulator-min-microvolt = <3800000>;
217 regulator-max-microvolt = <3800000>;
221 compatible = "regulator-fixed";
222 regulator-name = "vcc_host";
223 regulator-min-microvolt = <5000000>;
224 regulator-max-microvolt = <5000000>;
227 enable-active-high;
228 regulator-always-on;
229 regulator-boot-on;
230 vin-supply = <&usb_midu>;
235 cpu-supply = <&vdd_arm>;
239 cpu-supply = <&vdd_arm>;
243 cpu-supply = <&vdd_arm>;
247 cpu-supply = <&vdd_arm>;
251 assigned-clocks = <&cru PLL_NPLL>,
257 assigned-clock-rates = <1188000000>,
276 remote-endpoint = <&mipi_in_panel>;
285 iovcc-supply = <&vcc_lcd>;
286 reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
288 vdd-supply = <&vcc_lcd>;
292 remote-endpoint = <&mipi_out_panel>;
303 mali-supply = <&vdd_logic>;
308 clock-frequency = <400000>;
309 i2c-scl-falling-time-ns = <16>;
310 i2c-scl-rising-time-ns = <280>;
316 interrupt-parent = <&gpio0>;
318 clock-output-names = "rk808-clkout1", "xin32k";
319 clock-names = "mclk";
321 pinctrl-names = "default";
322 pinctrl-0 = <&pmic_int>, <&i2s1_2ch_mclk>;
323 wakeup-source;
324 #clock-cells = <1>;
325 #sound-dai-cells = <0>;
327 vcc1-supply = <&vccsys>;
328 vcc2-supply = <&vccsys>;
329 vcc3-supply = <&vccsys>;
330 vcc4-supply = <&vccsys>;
331 vcc5-supply = <&vccsys>;
332 vcc6-supply = <&vccsys>;
333 vcc7-supply = <&vccsys>;
334 vcc8-supply = <&vccsys>;
338 regulator-name = "vdd_logic";
339 regulator-min-microvolt = <950000>;
340 regulator-max-microvolt = <1150000>;
341 regulator-ramp-delay = <6001>;
342 regulator-always-on;
343 regulator-boot-on;
345 regulator-state-mem {
346 regulator-on-in-suspend;
347 regulator-suspend-microvolt = <950000>;
352 regulator-name = "vdd_arm";
353 regulator-min-microvolt = <950000>;
354 regulator-max-microvolt = <1350000>;
355 regulator-ramp-delay = <6001>;
356 regulator-always-on;
357 regulator-boot-on;
359 regulator-state-mem {
360 regulator-off-in-suspend;
361 regulator-suspend-microvolt = <950000>;
366 regulator-name = "vcc_ddr";
367 regulator-always-on;
368 regulator-boot-on;
370 regulator-state-mem {
371 regulator-on-in-suspend;
376 regulator-name = "vcc_3v3";
377 regulator-min-microvolt = <3300000>;
378 regulator-max-microvolt = <3300000>;
379 regulator-always-on;
380 regulator-boot-on;
382 regulator-state-mem {
383 regulator-off-in-suspend;
384 regulator-suspend-microvolt = <3300000>;
389 regulator-name = "vcc_1v8";
390 regulator-min-microvolt = <1800000>;
391 regulator-max-microvolt = <1800000>;
392 regulator-always-on;
393 regulator-boot-on;
395 regulator-state-mem {
396 regulator-on-in-suspend;
397 regulator-suspend-microvolt = <1800000>;
402 regulator-name = "vdd_1v0";
403 regulator-min-microvolt = <1000000>;
404 regulator-max-microvolt = <1000000>;
405 regulator-always-on;
406 regulator-boot-on;
408 regulator-state-mem {
409 regulator-on-in-suspend;
410 regulator-suspend-microvolt = <1000000>;
415 regulator-name = "vcc3v3_pmu";
416 regulator-min-microvolt = <3300000>;
417 regulator-max-microvolt = <3300000>;
418 regulator-always-on;
419 regulator-boot-on;
421 regulator-state-mem {
422 regulator-on-in-suspend;
423 regulator-suspend-microvolt = <3300000>;
428 regulator-name = "vccio_sd";
429 regulator-min-microvolt = <1800000>;
430 regulator-max-microvolt = <3300000>;
431 regulator-always-on;
432 regulator-boot-on;
434 regulator-state-mem {
435 regulator-on-in-suspend;
436 regulator-suspend-microvolt = <3300000>;
441 regulator-name = "vcc_sd";
442 regulator-min-microvolt = <3300000>;
443 regulator-max-microvolt = <3300000>;
444 regulator-boot-on;
446 regulator-state-mem {
447 regulator-on-in-suspend;
448 regulator-suspend-microvolt = <3300000>;
453 regulator-name = "vcc_bl";
454 regulator-min-microvolt = <3300000>;
455 regulator-max-microvolt = <3300000>;
457 regulator-state-mem {
458 regulator-off-in-suspend;
459 regulator-suspend-microvolt = <3300000>;
464 regulator-name = "vcc_lcd";
465 regulator-min-microvolt = <2800000>;
466 regulator-max-microvolt = <2800000>;
468 regulator-state-mem {
469 regulator-off-in-suspend;
470 regulator-suspend-microvolt = <2800000>;
475 regulator-name = "vcc_cam";
476 regulator-min-microvolt = <3000000>;
477 regulator-max-microvolt = <3000000>;
479 regulator-state-mem {
480 regulator-off-in-suspend;
481 regulator-suspend-microvolt = <3000000>;
486 regulator-name = "usb_midu";
487 regulator-min-microvolt = <5000000>;
488 regulator-max-microvolt = <5400000>;
489 regulator-always-on;
490 regulator-boot-on;
495 monitored-battery = <&battery>;
496 rockchip,resistor-sense-micro-ohms = <10000>;
497 rockchip,sleep-enter-current-microamp = <300000>;
498 rockchip,sleep-filter-current-microamp = <100000>;
502 rockchip,mic-in-differential;
509 clock-frequency = <400000>;
519 vccio1-supply = <&vcc_3v3>;
520 vccio2-supply = <&vccio_sd>;
521 vccio3-supply = <&vcc_3v3>;
522 vccio4-supply = <&vcc_3v3>;
523 vccio5-supply = <&vcc_3v3>;
524 vccio6-supply = <&vcc_3v3>;
529 pmuio1-supply = <&vcc3v3_pmu>;
530 pmuio2-supply = <&vcc3v3_pmu>;
539 vref-supply = <&vcc_1v8>;
544 cap-sd-highspeed;
545 card-detect-delay = <200>;
546 cd-gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_LOW>; /*[> CD GPIO <]*/
547 sd-uhs-sdr12;
548 sd-uhs-sdr25;
549 sd-uhs-sdr50;
550 sd-uhs-sdr104;
551 vmmc-supply = <&vcc_sd>;
552 vqmmc-supply = <&vccio_sd>;
557 pinctrl-0 = <&sfc_clk &sfc_cs0 &sfc_bus2>;
558 pinctrl-names = "default";
559 #address-cells = <1>;
560 #size-cells = <0>;
564 compatible = "jedec,spi-nor";
566 spi-max-frequency = <108000000>;
567 spi-rx-bus-width = <2>;
568 spi-tx-bus-width = <1>;
579 u2phy_host: host-port {
583 u2phy_otg: otg-port {
594 pinctrl-names = "default";
595 pinctrl-0 = <&uart1_xfer &uart1_cts>;
600 pinctrl-names = "default";
601 pinctrl-0 = <&uart2m1_xfer>;
615 btn_pins: btn-pins {
636 hp_det: hp-det {
642 blue_led_pin: blue-led-pin {
648 dc_det: dc-det {
652 pmic_int: pmic-int {