Lines Matching +full:regulator +full:- +full:initial +full:- +full:mode
1 // SPDX-License-Identifier: BSD-3-Clause
6 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
13 /delete-node/ &adsp_mem;
14 /delete-node/ &spss_mem;
15 /delete-node/ &cdsp_secure_heap;
18 qcom,msm-id = <356 0x20001>; /* SM8250 v2.1 */
19 qcom,board-id = <0x10008 0>;
22 #address-cells = <2>;
23 #size-cells = <2>;
27 compatible = "simple-framebuffer";
46 power-domains = <&dispcc MDSS_GDSC>;
50 gpio_keys: gpio-keys {
51 compatible = "gpio-keys";
60 key-vol-down {
64 debounce-interval = <15>;
65 linux,can-disable;
66 gpio-key,wakeup;
70 vph_pwr: vph-pwr-regulator {
71 compatible = "regulator-fixed";
72 regulator-name = "vph_pwr";
73 regulator-min-microvolt = <3700000>;
74 regulator-max-microvolt = <3700000>;
78 vreg_s6c_0p88: smpc6-regulator {
79 compatible = "regulator-fixed";
80 regulator-name = "vreg_s6c_0p88";
82 regulator-min-microvolt = <880000>;
83 regulator-max-microvolt = <880000>;
84 regulator-always-on;
85 vin-supply = <&vph_pwr>;
88 reserved-memory {
91 no-map;
96 no-map;
101 no-map;
106 no-map;
112 record-size = <0x1000>;
113 console-size = <0x40000>;
114 msg-size = <0x20000 0x20000>;
115 ecc-size = <16>;
116 no-map;
126 pm8150-rpmh-regulators {
127 compatible = "qcom,pm8150-rpmh-regulators";
128 qcom,pmic-id = "a";
130 vdd-s1-supply = <&vph_pwr>;
131 vdd-s2-supply = <&vph_pwr>;
132 vdd-s3-supply = <&vph_pwr>;
133 vdd-s4-supply = <&vph_pwr>;
134 vdd-s5-supply = <&vph_pwr>;
135 vdd-s6-supply = <&vph_pwr>;
136 vdd-s7-supply = <&vph_pwr>;
137 vdd-s8-supply = <&vph_pwr>;
138 vdd-s9-supply = <&vph_pwr>;
139 vdd-s10-supply = <&vph_pwr>;
140 vdd-l1-l8-l11-supply = <&vreg_s6c_0p88>;
141 vdd-l2-l10-supply = <&vreg_bob>;
142 vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p6>;
143 vdd-l6-l9-supply = <&vreg_s8c_1p2>;
144 vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>;
145 vdd-l13-l16-l17-supply = <&vreg_bob>;
147 /* (S1+S2+S3) - cx.lvl (ARC) */
150 regulator-name = "vreg_s4a_1p8";
151 regulator-min-microvolt = <1800000>;
152 regulator-max-microvolt = <1920000>;
153 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
157 regulator-name = "vreg_s5a_1p9";
158 regulator-min-microvolt = <1824000>;
159 regulator-max-microvolt = <2040000>;
160 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
164 regulator-name = "vreg_s6a_0p6";
165 regulator-min-microvolt = <600000>;
166 regulator-max-microvolt = <1128000>;
167 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
171 regulator-name = "vreg_l2a_3p1";
172 regulator-min-microvolt = <3072000>;
173 regulator-max-microvolt = <3072000>;
174 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
178 regulator-name = "vreg_l3a_0p9";
179 regulator-min-microvolt = <928000>;
180 regulator-max-microvolt = <932000>;
181 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
184 /* L4 - lmx.lvl (ARC) */
187 regulator-name = "vreg_l5a_0p88";
188 regulator-min-microvolt = <880000>;
189 regulator-max-microvolt = <880000>;
190 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
194 regulator-name = "vreg_l6a_1p2";
195 regulator-min-microvolt = <1200000>;
196 regulator-max-microvolt = <1200000>;
197 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
203 regulator-name = "vreg_l9a_1p2";
204 regulator-min-microvolt = <1200000>;
205 regulator-max-microvolt = <1200000>;
206 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
209 /* L10 is unused, L11 - lcx.lvl (ARC) */
212 regulator-name = "vreg_l12a_1p8";
213 regulator-min-microvolt = <1800000>;
214 regulator-max-microvolt = <1800000>;
215 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
221 regulator-name = "vreg_l14a_1p8";
222 regulator-min-microvolt = <1800000>;
223 regulator-max-microvolt = <1880000>;
224 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
230 regulator-name = "vreg_l17a_3p0";
231 regulator-min-microvolt = <2496000>;
232 regulator-max-microvolt = <3008000>;
233 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
237 regulator-name = "vreg_l18a_0p9";
238 regulator-min-microvolt = <800000>;
239 regulator-max-microvolt = <920000>;
240 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
246 * OLEDB: 4925000-8100000
247 * ab: 4600000-6100000
248 * ibb: 800000-5400000
250 pm8150l-rpmh-regulators {
251 compatible = "qcom,pm8150l-rpmh-regulators";
252 qcom,pmic-id = "c";
254 vdd-s1-supply = <&vph_pwr>;
255 vdd-s2-supply = <&vph_pwr>;
256 vdd-s3-supply = <&vph_pwr>;
257 vdd-s4-supply = <&vph_pwr>;
258 vdd-s5-supply = <&vph_pwr>;
259 vdd-s6-supply = <&vph_pwr>;
260 vdd-s7-supply = <&vph_pwr>;
261 vdd-s8-supply = <&vph_pwr>;
262 vdd-l1-l8-supply = <&vreg_s4a_1p8>;
263 vdd-l2-l3-supply = <&vreg_s8c_1p2>;
264 vdd-l4-l5-l6-supply = <&vreg_bob>;
265 vdd-l7-l11-supply = <&vreg_bob>;
266 vdd-l9-l10-supply = <&vreg_bob>;
267 vdd-bob-supply = <&vph_pwr>;
270 regulator-name = "vreg_bob";
271 regulator-min-microvolt = <3350000>;
272 regulator-max-microvolt = <3960000>;
273 regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
277 * S1-S6 are ARCs:
278 * (S1+S2) - gfx.lvl,
279 * S3 - mx.lvl,
280 * (S4+S5) - mmcx.lvl,
281 * S6 - ebi.lvl
285 regulator-name = "vreg_s7c_0p35";
286 regulator-min-microvolt = <348000>;
287 regulator-max-microvolt = <1000000>;
288 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
292 regulator-name = "vreg_s8c_1p2";
293 regulator-min-microvolt = <1200000>;
294 regulator-max-microvolt = <1400000>;
295 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
299 regulator-name = "vreg_l1c_1p8";
300 regulator-min-microvolt = <1800000>;
301 regulator-max-microvolt = <1800000>;
302 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
305 /* L2-4 are unused. */
308 regulator-name = "vreg_l5c_1p8";
309 regulator-min-microvolt = <1800000>;
310 regulator-max-microvolt = <2800000>;
311 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
315 regulator-name = "vreg_l6c_2p9";
316 regulator-min-microvolt = <1800000>;
317 regulator-max-microvolt = <2960000>;
318 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
319 regulator-allow-set-load;
320 regulator-allowed-modes =
326 regulator-name = "vreg_l7c_2p85";
327 regulator-min-microvolt = <2856000>;
328 regulator-max-microvolt = <3104000>;
329 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
333 regulator-name = "vreg_l8c_1p8";
334 regulator-min-microvolt = <1800000>;
335 regulator-max-microvolt = <1800000>;
336 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
340 regulator-name = "vreg_l9c_2p9";
341 regulator-min-microvolt = <2704000>;
342 regulator-max-microvolt = <2960000>;
343 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
344 regulator-allow-set-load;
345 regulator-allowed-modes =
351 regulator-name = "vreg_l10c_3p3";
352 regulator-min-microvolt = <3296000>;
353 regulator-max-microvolt = <3296000>;
354 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
358 regulator-name = "vreg_l11c_3p0";
359 regulator-min-microvolt = <3000000>;
360 regulator-max-microvolt = <3000000>;
361 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
365 pm8009-rpmh-regulators {
366 compatible = "qcom,pm8009-rpmh-regulators";
367 qcom,pmic-id = "f";
369 vdd-s1-supply = <&vph_pwr>;
370 vdd-s2-supply = <&vreg_bob>;
371 vdd-l2-supply = <&vreg_s8c_1p2>;
372 vdd-l5-l6-supply = <&vreg_bob>;
373 vdd-l7-supply = <&vreg_s4a_1p8>;
376 regulator-name = "vreg_s1f_1p2";
377 regulator-min-microvolt = <1200000>;
378 regulator-max-microvolt = <1200000>;
379 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
383 regulator-name = "vreg_s2f_0p5";
384 regulator-min-microvolt = <512000>;
385 regulator-max-microvolt = <1100000>;
386 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
392 regulator-name = "vreg_l2f_1p3";
393 regulator-min-microvolt = <1304000>;
394 regulator-max-microvolt = <1304000>;
395 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
401 regulator-name = "vreg_l5f_2p85";
402 regulator-min-microvolt = <2800000>;
403 regulator-max-microvolt = <2800000>;
404 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
408 regulator-name = "vreg_l6f_2p8";
409 regulator-min-microvolt = <2800000>;
410 regulator-max-microvolt = <2800000>;
411 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
415 regulator-name = "vreg_l7f_1p8";
416 regulator-min-microvolt = <1800000>;
417 regulator-max-microvolt = <1800000>;
418 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
441 clock-frequency = <400000>;
448 clock-frequency = <1000000>;
453 interrupt-parent = <&tlmm>;
455 reset-gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>;
456 cirrus,boost-peak-milliamp = <4000>;
457 cirrus,boost-ind-nanohenry = <1000>;
458 cirrus,boost-cap-microfarad = <15>;
459 cirrus,asp-sdout-hiz = <3>;
460 cirrus,gpio2-src-select = <2>;
461 cirrus,gpio2-output-enable;
462 #sound-dai-cells = <1>;
468 interrupt-parent = <&tlmm>;
470 reset-gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>;
471 cirrus,boost-peak-milliamp = <4000>;
472 cirrus,boost-ind-nanohenry = <1000>;
473 cirrus,boost-cap-microfarad = <15>;
474 cirrus,asp-sdout-hiz = <3>;
475 cirrus,gpio2-src-select = <2>;
476 cirrus,gpio2-output-enable;
477 #sound-dai-cells = <1>;
483 clock-frequency = <400000>;
490 clock-frequency = <400000>;
497 clock-frequency = <400000>;
502 interrupt-parent = <&tlmm>;
505 vdd-supply = <&vreg_l1c_1p8>;
506 avdd-supply = <&vreg_l10c_3p3>;
508 pinctrl-names = "default";
509 pinctrl-0 = <&ts_int_default>;
515 clock-frequency = <400000>;
531 vdda-phy-supply = <&vreg_l5a_0p88>;
532 vdda-pll-supply = <&vreg_l9a_1p2>;
538 pinctrl-0 = <&pcie2_default_state &mdm2ap_default &ap2mdm_default>;
544 vdda-phy-supply = <&vreg_l5a_0p88>;
545 vdda-pll-supply = <&vreg_l9a_1p2>;
573 cd-gpios = <&tlmm 77 GPIO_ACTIVE_HIGH>;
574 pinctrl-names = "default", "sleep";
575 pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>;
576 pinctrl-1 = <&sdc2_sleep_state &sdc2_card_det_n>;
577 vmmc-supply = <&vreg_l9c_2p9>;
578 vqmmc-supply = <&vreg_l6c_2p9>;
579 bus-width = <4>;
580 no-sdio;
581 no-emmc;
589 gpio-reserved-ranges = <40 4>, <52 4>;
591 sdc2_default_state: sdc2-default {
594 drive-strength = <16>;
595 bias-disable;
600 drive-strength = <16>;
601 bias-pull-up;
606 drive-strength = <16>;
607 bias-pull-up;
611 mdm2ap_default: mdm2ap-default {
614 drive-strength = <8>;
615 bias-disable;
618 ts_int_default: ts-int-default {
621 drive-strength = <2>;
622 bias-disabled;
623 input-enable;
626 ap2mdm_default: ap2mdm-default {
629 drive-strength = <16>;
630 bias-disable;
633 sdc2_card_det_n: sd-card-det-n {
636 bias-pull-up;
637 drive-strength = <2>;
660 vdda-pll-supply = <&vreg_l5a_0p88>;
661 vdda18-supply = <&vreg_l12a_1p8>;
662 vdda33-supply = <&vreg_l2a_3p1>;
668 vdda-phy-supply = <&vreg_l9a_1p2>;
669 vdda-pll-supply = <&vreg_l18a_0p9>;