Lines Matching +full:regulator +full:- +full:mode
1 // SPDX-License-Identifier: BSD-3-Clause
6 /dts-v1/;
8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/input/input.h>
10 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
11 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
20 chassis-type = "handset";
23 qcom,msm-id = <434 0x10000>, <459 0x10000>;
24 qcom,board-id = <8 32>;
31 #address-cells = <2>;
32 #size-cells = <2>;
35 stdout-path = "serial0:115200n8";
38 compatible = "simple-framebuffer";
47 gpio-keys {
48 compatible = "gpio-keys";
49 pinctrl-names = "default";
50 pinctrl-0 = <&gpio_keys_pin>;
52 key-volume-up {
59 reserved-memory {
66 compatible = "qcom,rmtfs-mem";
68 no-map;
70 qcom,client-id = <1>;
75 thermal-zones {
76 chg-skin-thermal {
77 polling-delay-passive = <0>;
78 polling-delay = <0>;
79 thermal-sensors = <&pm7250b_adc_tm 0>;
82 active-config0 {
90 conn-thermal {
91 polling-delay-passive = <0>;
92 polling-delay = <0>;
93 thermal-sensors = <&pm7250b_adc_tm 1>;
96 active-config0 {
108 firmware-name = "qcom/sm7225/fairphone4/adsp.mdt";
112 pm6350-rpmh-regulators {
113 compatible = "qcom,pm6350-rpmh-regulators";
114 qcom,pmic-id = "a";
117 regulator-min-microvolt = <1000000>;
118 regulator-max-microvolt = <1200000>;
122 regulator-min-microvolt = <1503000>;
123 regulator-max-microvolt = <2048000>;
127 regulator-min-microvolt = <1503000>;
128 regulator-max-microvolt = <1980000>;
129 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
133 regulator-min-microvolt = <2700000>;
134 regulator-max-microvolt = <3300000>;
135 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
139 regulator-min-microvolt = <352000>;
140 regulator-max-microvolt = <801000>;
141 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
145 regulator-min-microvolt = <1503000>;
146 regulator-max-microvolt = <1980000>;
147 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
151 regulator-min-microvolt = <1710000>;
152 regulator-max-microvolt = <3544000>;
153 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
157 regulator-min-microvolt = <1620000>;
158 regulator-max-microvolt = <1980000>;
159 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
163 regulator-min-microvolt = <2800000>;
164 regulator-max-microvolt = <2800000>;
165 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
169 regulator-min-microvolt = <1650000>;
170 regulator-max-microvolt = <3401000>;
171 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
175 regulator-min-microvolt = <1800000>;
176 regulator-max-microvolt = <2000000>;
177 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
181 regulator-min-microvolt = <1620000>;
182 regulator-max-microvolt = <1980000>;
183 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
187 regulator-min-microvolt = <570000>;
188 regulator-max-microvolt = <650000>;
189 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
193 regulator-min-microvolt = <1700000>;
194 regulator-max-microvolt = <1900000>;
195 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
199 regulator-min-microvolt = <1100000>;
200 regulator-max-microvolt = <1305000>;
201 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
205 regulator-min-microvolt = <830000>;
206 regulator-max-microvolt = <921000>;
207 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
211 regulator-min-microvolt = <788000>;
212 regulator-max-microvolt = <1049000>;
213 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
217 regulator-min-microvolt = <1080000>;
218 regulator-max-microvolt = <1305000>;
219 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
223 regulator-min-microvolt = <530000>;
224 regulator-max-microvolt = <801000>;
225 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
229 regulator-min-microvolt = <751000>;
230 regulator-max-microvolt = <825000>;
231 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
235 regulator-min-microvolt = <1080000>;
236 regulator-max-microvolt = <1305000>;
237 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
241 pm6150l-rpmh-regulators {
242 compatible = "qcom,pm6150l-rpmh-regulators";
243 qcom,pmic-id = "e";
246 regulator-min-microvolt = <313000>;
247 regulator-max-microvolt = <1395000>;
251 regulator-min-microvolt = <1620000>;
252 regulator-max-microvolt = <1980000>;
253 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
257 regulator-min-microvolt = <1170000>;
258 regulator-max-microvolt = <1305000>;
259 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
263 regulator-min-microvolt = <1100000>;
264 regulator-max-microvolt = <1299000>;
265 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
269 regulator-min-microvolt = <1620000>;
270 regulator-max-microvolt = <3300000>;
271 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
275 regulator-min-microvolt = <1620000>;
276 regulator-max-microvolt = <3300000>;
277 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
281 regulator-min-microvolt = <1700000>;
282 regulator-max-microvolt = <3544000>;
283 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
287 regulator-min-microvolt = <2700000>;
288 regulator-max-microvolt = <3544000>;
289 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
293 regulator-min-microvolt = <1620000>;
294 regulator-max-microvolt = <2000000>;
295 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
299 regulator-min-microvolt = <2700000>;
300 regulator-max-microvolt = <3544000>;
301 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
305 regulator-min-microvolt = <3000000>;
306 regulator-max-microvolt = <3401000>;
307 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
311 regulator-min-microvolt = <3000000>;
312 regulator-max-microvolt = <3401000>;
313 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
317 regulator-min-microvolt = <1620000>;
318 regulator-max-microvolt = <5492000>;
319 regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
320 regulator-allow-bypass;
327 firmware-name = "qcom/sm7225/fairphone4/cdsp.mdt";
332 clock-frequency = <400000>;
337 interrupts-extended = <&tlmm 85 IRQ_TYPE_EDGE_FALLING>;
338 reset-gpios = <&tlmm 90 GPIO_ACTIVE_HIGH>;
340 awinic,f0-preset = <2350>;
341 awinic,f0-coefficient = <260>;
342 awinic,f0-calibration-percent = <7>;
343 awinic,drive-level = <125>;
345 awinic,f0-detection-play-time = <5>;
346 awinic,f0-detection-wait-time = <3>;
347 awinic,f0-detection-repeat = <2>;
348 awinic,f0-detection-trace = <15>;
350 awinic,boost-debug = /bits/ 8 <0x30 0xeb 0xd4>;
352 awinic,r-spare = /bits/ 8 <0x68>;
354 awinic,bemf-upper-threshold = <4104>;
355 awinic,bemf-lower-threshold = <1016>;
361 firmware-name = "qcom/sm7225/fairphone4/modem.mdt";
367 qcom,switching-freq = <800>;
368 qcom,current-limit-microamp = <20000>;
369 qcom,num-strings = <2>;
373 gpio_keys_pin: gpio-keys-state {
376 bias-pull-up;
377 input-enable;
378 power-source = <0>;
388 adc-chan@4d {
391 qcom,hw-settle-time = <200>;
392 qcom,pre-scaling = <1 1>;
396 adc-chan@4f {
399 qcom,hw-settle-time = <200>;
400 qcom,pre-scaling = <1 1>;
408 charger-skin-therm@0 {
410 io-channels = <&pm7250b_adc ADC5_AMUX_THM1_100K_PU>;
412 qcom,hw-settle-time-us = <200>;
415 conn-therm@1 {
417 io-channels = <&pm7250b_adc ADC5_AMUX_THM3_100K_PU>;
419 qcom,hw-settle-time-us = <200>;
428 gpio-reserved-ranges = <13 4>, <56 2>;
438 reset-gpios = <&tlmm 156 GPIO_ACTIVE_LOW>;
440 vcc-supply = <&vreg_l7e>;
441 vcc-max-microamp = <800000>;
442 vccq2-supply = <&vreg_l12a>;
443 vccq2-max-microamp = <800000>;
449 vdda-phy-supply = <&vreg_l18a>;
450 vdda-pll-supply = <&vreg_l22a>;
458 maximum-speed = "super-speed";
465 vdd-supply = <&vreg_l18a>;
466 vdda-pll-supply = <&vreg_l2a>;
467 vdda-phy-dpdm-supply = <&vreg_l3a>;
473 vdda-phy-supply = <&vreg_l22a>;
474 vdda-pll-supply = <&vreg_l16a>;
480 vdd-0.8-cx-mx-supply = <&vreg_l4a>;
481 vdd-1.8-xo-supply = <&vreg_l7a>;
482 vdd-1.3-rfa-supply = <&vreg_l2e>;
483 vdd-3.3-ch0-supply = <&vreg_l10e>;
484 vdd-3.3-ch1-supply = <&vreg_l11e>;