Lines Matching +full:regulator +full:- +full:mode
1 // SPDX-License-Identifier: BSD-3-Clause
6 #include <dt-bindings/input/input.h>
7 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
14 qcom,msm-id = <321 0x20001>; /* SDM845 v2.1 */
15 qcom,board-id = <8 0>;
17 gpio-keys {
18 compatible = "gpio-keys";
22 key-vol-down {
26 debounce-interval = <15>;
27 gpio-key,wakeup;
31 vph_pwr: vph-pwr-regulator {
32 compatible = "regulator-fixed";
33 regulator-name = "vph_pwr";
34 regulator-min-microvolt = <3700000>;
35 regulator-max-microvolt = <3700000>;
38 vreg_s4a_1p8: pm8998-smps4 {
39 compatible = "regulator-fixed";
40 regulator-name = "vreg_s4a_1p8";
42 regulator-min-microvolt = <1800000>;
43 regulator-max-microvolt = <1800000>;
45 regulator-always-on;
46 regulator-boot-on;
48 vin-supply = <&vph_pwr>;
51 reserved-memory {
55 no-map;
61 record-size = <0x10000>;
62 console-size = <0x60000>;
63 ftrace-size = <0x10000>;
64 pmsg-size = <0x20000>;
65 ecc-size = <16>;
66 no-map;
72 pm8998-rpmh-regulators {
73 compatible = "qcom,pm8998-rpmh-regulators";
74 qcom,pmic-id = "a";
76 vdd-s1-supply = <&vph_pwr>;
77 vdd-s2-supply = <&vph_pwr>;
78 vdd-s3-supply = <&vph_pwr>;
79 vdd-s4-supply = <&vph_pwr>;
80 vdd-s5-supply = <&vph_pwr>;
81 vdd-s6-supply = <&vph_pwr>;
82 vdd-s7-supply = <&vph_pwr>;
83 vdd-s8-supply = <&vph_pwr>;
84 vdd-s9-supply = <&vph_pwr>;
85 vdd-s10-supply = <&vph_pwr>;
86 vdd-s11-supply = <&vph_pwr>;
87 vdd-s12-supply = <&vph_pwr>;
88 vdd-s13-supply = <&vph_pwr>;
89 vdd-l1-l27-supply = <&vreg_s7a_0p9>;
90 vdd-l2-l8-l17-supply = <&vreg_s3a_1p3>;
91 vdd-l3-l11-supply = <&vreg_s7a_0p9>;
92 vdd-l4-l5-supply = <&vreg_s7a_0p9>;
93 vdd-l6-supply = <&vph_pwr>;
94 vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>;
95 vdd-l9-supply = <&vreg_s5a_1p9>;
96 vdd-l10-l23-l25-supply = <&src_vreg_bob>;
97 vdd-l13-l19-l21-supply = <&src_vreg_bob>;
98 vdd-l16-l28-supply = <&src_vreg_bob>;
99 vdd-l18-l22-supply = <&src_vreg_bob>;
100 vdd-l20-l24-supply = <&src_vreg_bob>;
101 vdd-l26-supply = <&vreg_s3a_1p3>;
102 vin-lvs-1-2-supply = <&vreg_s4a_1p8>;
105 regulator-min-microvolt = <1100000>;
106 regulator-max-microvolt = <1100000>;
110 regulator-min-microvolt = <1352000>;
111 regulator-max-microvolt = <1352000>;
115 regulator-min-microvolt = <1904000>;
116 regulator-max-microvolt = <2040000>;
120 regulator-min-microvolt = <900000>;
121 regulator-max-microvolt = <1028000>;
125 regulator-min-microvolt = <880000>;
126 regulator-max-microvolt = <880000>;
127 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
131 regulator-min-microvolt = <1200000>;
132 regulator-max-microvolt = <1200000>;
133 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
134 regulator-always-on;
138 regulator-min-microvolt = <1000000>;
139 regulator-max-microvolt = <1000000>;
140 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
144 regulator-min-microvolt = <800000>;
145 regulator-max-microvolt = <800000>;
146 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
150 regulator-min-microvolt = <1856000>;
151 regulator-max-microvolt = <1856000>;
152 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
156 regulator-min-microvolt = <1800000>;
157 regulator-max-microvolt = <1800000>;
158 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
162 regulator-min-microvolt = <1200000>;
163 regulator-max-microvolt = <1248000>;
164 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
168 regulator-min-microvolt = <1704000>;
169 regulator-max-microvolt = <2928000>;
170 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
174 regulator-min-microvolt = <1704000>;
175 regulator-max-microvolt = <2928000>;
176 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
180 regulator-min-microvolt = <1000000>;
181 regulator-max-microvolt = <1048000>;
182 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
186 regulator-min-microvolt = <1800000>;
187 regulator-max-microvolt = <1800000>;
188 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
192 regulator-min-microvolt = <1800000>;
193 regulator-max-microvolt = <2960000>;
194 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
198 regulator-min-microvolt = <1800000>;
199 regulator-max-microvolt = <1800000>;
200 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
204 regulator-min-microvolt = <1800000>;
205 regulator-max-microvolt = <1800000>;
206 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
210 regulator-min-microvolt = <2704000>;
211 regulator-max-microvolt = <2704000>;
212 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
216 regulator-min-microvolt = <1304000>;
217 regulator-max-microvolt = <1304000>;
218 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
222 regulator-min-microvolt = <2704000>;
223 regulator-max-microvolt = <2960000>;
224 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
228 regulator-min-microvolt = <2700000>;
229 regulator-max-microvolt = <2700000>;
230 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
234 * saying that it could not get the current voltage (-ENOTRECOVERABLE)
242 regulator-min-microvolt = <2704000>;
243 regulator-max-microvolt = <2960000>;
244 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
248 regulator-min-microvolt = <2704000>;
249 regulator-max-microvolt = <2960000>;
250 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
254 regulator-min-microvolt = <2800000>;
255 regulator-max-microvolt = <2800000>;
256 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
260 regulator-min-microvolt = <3000000>;
261 regulator-max-microvolt = <3312000>;
262 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
266 regulator-min-microvolt = <3088000>;
267 regulator-max-microvolt = <3088000>;
268 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
272 regulator-min-microvolt = <3000000>;
273 regulator-max-microvolt = <3312000>;
274 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
278 regulator-min-microvolt = <1200000>;
279 regulator-max-microvolt = <1200000>;
280 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
284 regulator-min-microvolt = <2856000>;
285 regulator-max-microvolt = <3008000>;
286 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
290 regulator-min-microvolt = <1800000>;
291 regulator-max-microvolt = <1800000>;
292 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
296 regulator-min-microvolt = <1800000>;
297 regulator-max-microvolt = <1800000>;
298 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
302 pmi8998-rpmh-regulators {
303 compatible = "qcom,pmi8998-rpmh-regulators";
304 qcom,pmic-id = "b";
307 regulator-min-microvolt = <3312000>;
308 regulator-max-microvolt = <3600000>;
309 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
313 pm8005-rpmh-regulators {
314 compatible = "qcom,pm8005-rpmh-regulators";
315 qcom,pmic-id = "c";
317 vdd-s1-supply = <&vph_pwr>;
318 vdd-s2-supply = <&vph_pwr>;
319 vdd-s3-supply = <&vph_pwr>;
320 vdd-s4-supply = <&vph_pwr>;
323 regulator-min-microvolt = <600000>;
324 regulator-max-microvolt = <600000>;
330 protected-clocks = <GCC_QSPI_CORE_CLK>,
339 clock-frequency = <400000>;
346 clock-frequency = <400000>;
355 clock-frequency = <400000>;
372 vmmc-supply = <&vreg_l21a_2p7>;
373 vqmmc-supply = <&vreg_l13a_1p8>;
374 cd-gpios = <&tlmm 126 GPIO_ACTIVE_HIGH>;
375 pinctrl-0 = <&sdc2_default_state>;
376 pinctrl-names = "default";
377 bus-width = <4>;
378 no-sdio;
379 no-emmc;
383 gpio-reserved-ranges = <0 4>, <81 4>;
385 sdc2_default_state: sdc2-default-state {
388 drive-strength = <16>;
389 bias-disable;
394 drive-strength = <10>;
395 bias-pull-up;
400 drive-strength = <10>;
401 bias-pull-up;
421 qcom,select-utmi-as-pipe-clk;
427 maximum-speed = "high-speed";
429 phy-names = "usb2-phy";
435 vdd-supply = <&vreg_l1a_0p9>;
436 vdda-pll-supply = <&vreg_l12a_1p8>;
437 vdda-phy-dpdm-supply = <&vreg_l24a_3p1>;