Lines Matching +full:regulator +full:- +full:microvolt +full:- +full:offset
1 // SPDX-License-Identifier: GPL-2.0
8 /dts-v1/;
10 #include <dt-bindings/input/linux-event-codes.h>
11 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
17 /delete-node/ &rmtfs_mem;
26 stdout-path = "serial0:115200n8";
29 gpio-keys {
30 compatible = "gpio-keys";
34 pinctrl-names = "default";
35 pinctrl-0 = <&volume_down_gpio &volume_up_gpio>;
37 key-vol-down {
41 debounce-interval = <15>;
44 key-vol-up {
48 debounce-interval = <15>;
52 reserved-memory {
57 rmtfs_lower_guard: rmtfs-lower-guard@f5b00000 {
58 no-map;
66 rmtfs_mem: rmtfs-mem@f5b01000 {
67 compatible = "qcom,rmtfs-mem";
69 no-map;
71 qcom,client-id = <1>;
74 rmtfs_upper_guard: rmtfs-upper-guard@f5d01000 {
75 no-map;
83 removed_region: removed-region@88f00000 {
84 no-map;
91 record-size = <0x40000>;
92 console-size = <0x40000>;
93 ftrace-size = <0x40000>;
94 pmsg-size = <0x200000>;
95 ecc-size = <16>;
99 vph_pwr: vph-pwr-regulator {
100 compatible = "regulator-fixed";
101 regulator-name = "vph_pwr";
102 regulator-min-microvolt = <3700000>;
103 regulator-max-microvolt = <3700000>;
108 * is always-on; model it as a fixed regulator.
110 vreg_s4a_1p8: pm8998-smps4 {
111 compatible = "regulator-fixed";
112 regulator-name = "vreg_s4a_1p8";
114 regulator-min-microvolt = <1800000>;
115 regulator-max-microvolt = <1800000>;
117 regulator-always-on;
118 regulator-boot-on;
120 vin-supply = <&vph_pwr>;
124 * The touchscreen regulator seems to be controlled somehow by a gpio.
125 * Model it as a fixed regulator and keep it on. Without schematics we
128 ts_1p8_supply: ts-1p8-regulator {
129 compatible = "regulator-fixed";
130 regulator-name = "ts_1p8_supply";
132 regulator-min-microvolt = <1800000>;
133 regulator-max-microvolt = <1800000>;
136 enable-active-high;
137 regulator-boot-on;
143 firmware-name = "qcom/sdm845/oneplus6/adsp.mbn";
147 pm8998-rpmh-regulators {
148 compatible = "qcom,pm8998-rpmh-regulators";
149 qcom,pmic-id = "a";
151 vdd-s1-supply = <&vph_pwr>;
152 vdd-s2-supply = <&vph_pwr>;
153 vdd-s3-supply = <&vph_pwr>;
154 vdd-s4-supply = <&vph_pwr>;
155 vdd-s5-supply = <&vph_pwr>;
156 vdd-s6-supply = <&vph_pwr>;
157 vdd-s7-supply = <&vph_pwr>;
158 vdd-s8-supply = <&vph_pwr>;
159 vdd-s9-supply = <&vph_pwr>;
160 vdd-s10-supply = <&vph_pwr>;
161 vdd-s11-supply = <&vph_pwr>;
162 vdd-s12-supply = <&vph_pwr>;
163 vdd-s13-supply = <&vph_pwr>;
164 vdd-l1-l27-supply = <&vreg_s7a_1p025>;
165 vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
166 vdd-l3-l11-supply = <&vreg_s7a_1p025>;
167 vdd-l4-l5-supply = <&vreg_s7a_1p025>;
168 vdd-l6-supply = <&vph_pwr>;
169 vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
170 vdd-l9-supply = <&vreg_bob>;
171 vdd-l10-l23-l25-supply = <&vreg_bob>;
172 vdd-l13-l19-l21-supply = <&vreg_bob>;
173 vdd-l16-l28-supply = <&vreg_bob>;
174 vdd-l18-l22-supply = <&vreg_bob>;
175 vdd-l20-l24-supply = <&vreg_bob>;
176 vdd-l26-supply = <&vreg_s3a_1p35>;
177 vin-lvs-1-2-supply = <&vreg_s4a_1p8>;
180 regulator-min-microvolt = <1352000>;
181 regulator-max-microvolt = <1352000>;
185 regulator-min-microvolt = <1904000>;
186 regulator-max-microvolt = <2040000>;
190 regulator-min-microvolt = <900000>;
191 regulator-max-microvolt = <1028000>;
199 regulator-min-microvolt = <880000>;
200 regulator-max-microvolt = <880000>;
201 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
205 regulator-min-microvolt = <1200000>;
206 regulator-max-microvolt = <1200000>;
207 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
208 regulator-always-on;
212 regulator-min-microvolt = <800000>;
213 regulator-max-microvolt = <800000>;
214 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
218 regulator-min-microvolt = <1800000>;
219 regulator-max-microvolt = <1800000>;
220 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
225 regulator-min-microvolt = <1800000>;
226 regulator-max-microvolt = <1800000>;
227 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
231 regulator-min-microvolt = <1800000>;
232 regulator-max-microvolt = <1800000>;
233 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
234 regulator-always-on;
238 regulator-min-microvolt = <1304000>;
239 regulator-max-microvolt = <1304000>;
240 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
244 regulator-min-microvolt = <2704000>;
245 regulator-max-microvolt = <2960000>;
246 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
250 regulator-min-microvolt = <3300000>;
251 regulator-max-microvolt = <3312000>;
252 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
257 regulator-min-microvolt = <3088000>;
258 regulator-max-microvolt = <3088000>;
259 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
263 regulator-min-microvolt = <3300000>;
264 regulator-max-microvolt = <3312000>;
265 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
271 regulator-min-microvolt = <1200000>;
272 regulator-max-microvolt = <1200000>;
273 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
277 regulator-min-microvolt = <2856000>;
278 regulator-max-microvolt = <3008000>;
279 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
283 pmi8998-rpmh-regulators {
284 compatible = "qcom,pmi8998-rpmh-regulators";
285 qcom,pmic-id = "b";
287 vdd-bob-supply = <&vph_pwr>;
290 regulator-min-microvolt = <3312000>;
291 regulator-max-microvolt = <3600000>;
292 regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
293 regulator-allow-bypass;
297 pm8005-rpmh-regulators {
298 compatible = "qcom,pm8005-rpmh-regulators";
299 qcom,pmic-id = "c";
301 vdd-s1-supply = <&vph_pwr>;
302 vdd-s2-supply = <&vph_pwr>;
303 vdd-s3-supply = <&vph_pwr>;
304 vdd-s4-supply = <&vph_pwr>;
307 regulator-min-microvolt = <600000>;
308 regulator-max-microvolt = <600000>;
315 firmware-name = "qcom/sdm845/oneplus6/cdsp.mbn";
320 vdda-supply = <&vdda_mipi_dsi0_1p2>;
329 #address-cells = <1>;
330 #size-cells = <0>;
333 vddio-supply = <&vreg_l14a_1p88>;
335 reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
337 pinctrl-names = "default";
338 pinctrl-0 = <&panel_reset_pins &panel_te_pin &panel_esd_pin>;
342 remote-endpoint = <&dsi0_out>;
349 remote-endpoint = <&panel_in>;
350 data-lanes = <0 1 2 3>;
355 vdds-supply = <&vdda_mipi_dsi0_pll>;
359 protected-clocks = <GCC_QSPI_CORE_CLK>,
373 zap-shader {
374 memory-region = <&gpu_mem>;
375 firmware-name = "qcom/sdm845/oneplus6/a630_zap.mbn";
381 clock-frequency = <100000>;
383 bq27441_fg: bq27441-battery@55 {
392 clock-frequency = <400000>;
394 synaptics-rmi4-i2c@20 {
395 compatible = "syna,rmi4-i2c";
397 #address-cells = <1>;
398 #size-cells = <0>;
399 interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>;
401 pinctrl-names = "default";
402 pinctrl-0 = <&ts_default_pins>;
404 vdd-supply = <&vreg_l28a_3p0>;
405 vio-supply = <&ts_1p8_supply>;
407 syna,reset-delay-ms = <200>;
408 syna,startup-delay-ms = <200>;
410 rmi4-f01@1 {
412 syna,nosleep-mode = <1>;
415 rmi4_f12: rmi4-f12@12 {
417 touchscreen-x-mm = <68>;
418 touchscreen-y-mm = <144>;
419 syna,sensor-type = <1>;
420 syna,rezero-wait-ms = <200>;
428 memory-region = <&ipa_fw_mem>;
429 firmware-name = "qcom/sdm845/oneplus6/ipa_fws.mbn";
439 firmware-name = "qcom/sdm845/oneplus6/mba.mbn", "qcom/sdm845/oneplus6/modem.mbn";
443 volume_down_gpio: pm8998-gpio5-state {
447 input-enable;
448 bias-pull-up;
449 qcom,drive-strength = <0>;
453 volume_up_gpio: pm8998-gpio6-state {
457 input-enable;
458 bias-pull-up;
459 qcom,drive-strength = <0>;
476 drive-strength = <2>;
477 bias-disable;
484 drive-strength = <2>;
485 bias-disable;
490 pinconf-tx {
492 drive-strength = <2>;
493 bias-disable;
496 pinconf-rx {
498 drive-strength = <2>;
499 bias-pull-up;
514 bias-pull-down;
517 rts-tx {
519 drive-strength = <2>;
520 bias-disable;
525 bias-pull-up;
533 compatible = "qcom,wcn3990-bt";
539 firmware-name = "oneplus6/crnv21.bin";
541 vddio-supply = <&vreg_s4a_1p8>;
542 vddxo-supply = <&vreg_l7a_1p8>;
543 vddrf-supply = <&vreg_l17a_1p3>;
544 vddch0-supply = <&vreg_l25a_3p3>;
545 max-speed = <3200000>;
550 label = "LS-UART1";
557 reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
559 vcc-supply = <&vreg_l20a_2p95>;
560 vcc-max-microamp = <600000>;
566 vdda-phy-supply = <&vdda_ufs1_core>;
567 vdda-pll-supply = <&vdda_ufs1_1p2>;
577 qcom,select-utmi-as-pipe-clk;
587 maximum-speed = "high-speed";
591 phy-names = "usb2-phy";
597 vdd-supply = <&vdda_usb1_ss_core>;
598 vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
599 vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
601 qcom,imp-res-offset-value = <8>;
602 qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
603 qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
604 qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
608 gpio-reserved-ranges = <0 4>, <81 4>;
614 drive-strength = <2>;
615 bias-disable;
619 ts_default_pins: ts-int {
623 drive-strength = <16>;
624 bias-pull-up;
628 panel_reset_pins: panel-reset {
632 drive-strength = <8>;
633 bias-disable;
637 panel_te_pin: panel-te {
641 drive-strength = <2>;
642 bias-disable;
643 input-enable;
647 panel_esd_pin: panel-esd {
651 drive-strength = <2>;
652 bias-pull-down;
653 input-enable;
660 firmware-name = "qcom/sdm845/oneplus6/venus.mbn";
665 vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
666 vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
667 vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
668 vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
669 vdd-3.3-ch1-supply = <&vreg_l23a_3p3>;
671 qcom,snoc-host-cap-8bit-quirk;