Lines Matching +full:regulator +full:- +full:initial +full:- +full:mode
1 // SPDX-License-Identifier: GPL-2.0
8 /dts-v1/;
10 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
17 compatible = "qcom,sdm845-mtp", "qcom,sdm845";
24 stdout-path = "serial0:115200n8";
27 vph_pwr: vph-pwr-regulator {
28 compatible = "regulator-fixed";
29 regulator-name = "vph_pwr";
30 regulator-min-microvolt = <3700000>;
31 regulator-max-microvolt = <3700000>;
36 * is always-on; model it as a fixed regulator.
38 vreg_s4a_1p8: pm8998-smps4 {
39 compatible = "regulator-fixed";
40 regulator-name = "vreg_s4a_1p8";
42 regulator-min-microvolt = <1800000>;
43 regulator-max-microvolt = <1800000>;
45 regulator-always-on;
46 regulator-boot-on;
48 vin-supply = <&vph_pwr>;
51 thermal-zones {
52 xo_thermal: xo-thermal {
53 polling-delay-passive = <0>;
54 polling-delay = <0>;
56 thermal-sensors = <&pm8998_adc_tm 1>;
59 trip-point {
67 msm_thermal: msm-thermal {
68 polling-delay-passive = <0>;
69 polling-delay = <0>;
71 thermal-sensors = <&pm8998_adc_tm 2>;
74 trip-point {
82 pa_thermal: pa-thermal {
83 polling-delay-passive = <0>;
84 polling-delay = <0>;
86 thermal-sensors = <&pm8998_adc_tm 3>;
89 trip-point {
97 quiet_thermal: quiet-thermal {
98 polling-delay-passive = <0>;
99 polling-delay = <0>;
101 thermal-sensors = <&pm8998_adc_tm 4>;
104 trip-point {
116 firmware-name = "qcom/sdm845/adsp.mdt";
120 pm8998-rpmh-regulators {
121 compatible = "qcom,pm8998-rpmh-regulators";
122 qcom,pmic-id = "a";
124 vdd-s1-supply = <&vph_pwr>;
125 vdd-s2-supply = <&vph_pwr>;
126 vdd-s3-supply = <&vph_pwr>;
127 vdd-s4-supply = <&vph_pwr>;
128 vdd-s5-supply = <&vph_pwr>;
129 vdd-s6-supply = <&vph_pwr>;
130 vdd-s7-supply = <&vph_pwr>;
131 vdd-s8-supply = <&vph_pwr>;
132 vdd-s9-supply = <&vph_pwr>;
133 vdd-s10-supply = <&vph_pwr>;
134 vdd-s11-supply = <&vph_pwr>;
135 vdd-s12-supply = <&vph_pwr>;
136 vdd-s13-supply = <&vph_pwr>;
137 vdd-l1-l27-supply = <&vreg_s7a_1p025>;
138 vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
139 vdd-l3-l11-supply = <&vreg_s7a_1p025>;
140 vdd-l4-l5-supply = <&vreg_s7a_1p025>;
141 vdd-l6-supply = <&vph_pwr>;
142 vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
143 vdd-l9-supply = <&vreg_bob>;
144 vdd-l10-l23-l25-supply = <&vreg_bob>;
145 vdd-l13-l19-l21-supply = <&vreg_bob>;
146 vdd-l16-l28-supply = <&vreg_bob>;
147 vdd-l18-l22-supply = <&vreg_bob>;
148 vdd-l20-l24-supply = <&vreg_bob>;
149 vdd-l26-supply = <&vreg_s3a_1p35>;
150 vin-lvs-1-2-supply = <&vreg_s4a_1p8>;
153 regulator-min-microvolt = <1100000>;
154 regulator-max-microvolt = <1100000>;
158 regulator-min-microvolt = <1352000>;
159 regulator-max-microvolt = <1352000>;
163 regulator-min-microvolt = <1904000>;
164 regulator-max-microvolt = <2040000>;
168 regulator-min-microvolt = <900000>;
169 regulator-max-microvolt = <1028000>;
191 regulator-min-microvolt = <880000>;
192 regulator-max-microvolt = <880000>;
193 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
198 regulator-min-microvolt = <1200000>;
199 regulator-max-microvolt = <1200000>;
200 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
201 regulator-always-on;
205 regulator-min-microvolt = <1000000>;
206 regulator-max-microvolt = <1000000>;
207 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
214 regulator-min-microvolt = <800000>;
215 regulator-max-microvolt = <800000>;
216 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
221 regulator-min-microvolt = <1856000>;
222 regulator-max-microvolt = <1856000>;
223 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
227 regulator-min-microvolt = <1800000>;
228 regulator-max-microvolt = <1800000>;
229 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
233 regulator-min-microvolt = <1200000>;
234 regulator-max-microvolt = <1248000>;
235 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
239 regulator-min-microvolt = <1704000>;
240 regulator-max-microvolt = <2928000>;
241 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
245 regulator-min-microvolt = <1704000>;
246 regulator-max-microvolt = <2928000>;
247 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
251 regulator-min-microvolt = <1000000>;
252 regulator-max-microvolt = <1048000>;
253 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
264 regulator-min-microvolt = <1800000>;
265 regulator-max-microvolt = <1800000>;
266 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
271 regulator-min-microvolt = <1800000>;
272 regulator-max-microvolt = <2960000>;
273 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
277 regulator-min-microvolt = <1800000>;
278 regulator-max-microvolt = <1800000>;
279 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
283 regulator-min-microvolt = <1800000>;
284 regulator-max-microvolt = <1800000>;
285 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
289 regulator-min-microvolt = <2704000>;
290 regulator-max-microvolt = <2704000>;
291 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
295 regulator-min-microvolt = <1304000>;
296 regulator-max-microvolt = <1304000>;
297 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
301 regulator-min-microvolt = <2704000>;
302 regulator-max-microvolt = <2960000>;
303 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
307 regulator-min-microvolt = <2856000>;
308 regulator-max-microvolt = <3104000>;
309 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
313 regulator-min-microvolt = <2704000>;
314 regulator-max-microvolt = <2960000>;
315 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
319 regulator-min-microvolt = <2704000>;
320 regulator-max-microvolt = <2960000>;
321 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
325 regulator-min-microvolt = <2864000>;
326 regulator-max-microvolt = <3312000>;
327 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
331 regulator-min-microvolt = <3000000>;
332 regulator-max-microvolt = <3312000>;
333 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
338 regulator-min-microvolt = <3088000>;
339 regulator-max-microvolt = <3088000>;
340 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
344 regulator-min-microvolt = <3300000>;
345 regulator-max-microvolt = <3312000>;
346 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
363 regulator-min-microvolt = <1200000>;
364 regulator-max-microvolt = <1200000>;
365 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
369 regulator-min-microvolt = <2856000>;
370 regulator-max-microvolt = <3008000>;
371 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
375 regulator-min-microvolt = <1800000>;
376 regulator-max-microvolt = <1800000>;
380 regulator-min-microvolt = <1800000>;
381 regulator-max-microvolt = <1800000>;
385 pmi8998-rpmh-regulators {
386 compatible = "qcom,pmi8998-rpmh-regulators";
387 qcom,pmic-id = "b";
389 vdd-bob-supply = <&vph_pwr>;
392 regulator-min-microvolt = <3312000>;
393 regulator-max-microvolt = <3600000>;
394 regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
395 regulator-allow-bypass;
399 pm8005-rpmh-regulators {
400 compatible = "qcom,pm8005-rpmh-regulators";
401 qcom,pmic-id = "c";
403 vdd-s1-supply = <&vph_pwr>;
404 vdd-s2-supply = <&vph_pwr>;
405 vdd-s3-supply = <&vph_pwr>;
406 vdd-s4-supply = <&vph_pwr>;
409 regulator-min-microvolt = <600000>;
410 regulator-max-microvolt = <600000>;
417 firmware-name = "qcom/sdm845/cdsp.mdt";
422 vdda-supply = <&vdda_mipi_dsi0_1p2>;
424 qcom,dual-dsi-mode;
425 qcom,master-dsi;
430 remote-endpoint = <&truly_in_0>;
431 data-lanes = <0 1 2 3>;
437 compatible = "truly,nt35597-2K-display";
439 vdda-supply = <&vreg_l14a_1p88>;
441 reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
442 mode-gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>;
445 #address-cells = <1>;
446 #size-cells = <0>;
451 remote-endpoint = <&dsi0_out>;
458 remote-endpoint = <&dsi1_out>;
467 vdds-supply = <&vdda_mipi_dsi0_pll>;
472 vdda-supply = <&vdda_mipi_dsi1_1p2>;
474 qcom,dual-dsi-mode;
477 assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
482 remote-endpoint = <&truly_in_1>;
483 data-lanes = <0 1 2 3>;
491 vdds-supply = <&vdda_mipi_dsi1_pll>;
495 protected-clocks = <GCC_QSPI_CORE_CLK>,
509 zap-shader {
510 memory-region = <&gpu_mem>;
511 firmware-name = "qcom/sdm845/a630_zap.mbn";
517 clock-frequency = <400000>;
522 memory-region = <&ipa_fw_mem>;
531 firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mbn";
535 adc-chan@4c {
539 qcom,hw-settle-time = <200>;
542 adc-chan@4d {
546 qcom,hw-settle-time = <200>;
549 adc-chan@4f {
553 qcom,hw-settle-time = <200>;
556 adc-chan@51 {
560 qcom,hw-settle-time = <200>;
563 adc-chan@83 {
567 qcom,hw-settle-time = <200>;
570 adc-chan@85 {
574 qcom,hw-settle-time = <200>;
581 xo-thermistor@1 {
583 io-channels = <&pm8998_adc ADC5_XO_THERM_100K_PU>;
585 qcom,hw-settle-time-us = <200>;
588 msm-thermistor@2 {
590 io-channels = <&pm8998_adc ADC5_AMUX_THM1_100K_PU>;
592 qcom,hw-settle-time-us = <200>;
595 pa-thermistor@3 {
597 io-channels = <&pm8998_adc ADC5_AMUX_THM3_100K_PU>;
599 qcom,hw-settle-time-us = <200>;
602 quiet-thermistor@4 {
604 io-channels = <&pm8998_adc ADC5_AMUX_THM5_100K_PU>;
606 qcom,hw-settle-time-us = <200>;
617 pinctrl-names = "default";
618 pinctrl-0 = <&sdc2_clk &sdc2_cmd &sdc2_data &sd_card_det_n>;
620 vmmc-supply = <&vreg_l21a_2p95>;
621 vqmmc-supply = <&vddpx_2>;
623 cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>;
633 reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
635 vcc-supply = <&vreg_l20a_2p95>;
636 vcc-max-microamp = <600000>;
642 vdda-phy-supply = <&vdda_ufs1_core>;
643 vdda-pll-supply = <&vdda_ufs1_1p2>;
658 vdd-supply = <&vdda_usb1_ss_core>;
659 vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
660 vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
662 qcom,imp-res-offset-value = <8>;
663 qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
664 qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
665 qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
671 vdda-phy-supply = <&vdda_usb1_ss_1p2>;
672 vdda-pll-supply = <&vdda_usb1_ss_core>;
682 * signal for this port on MTP. Thus (unless you have a non-compliant
684 * peripheral mode.
692 vdd-supply = <&vdda_usb2_ss_core>;
693 vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
694 vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
696 qcom,imp-res-offset-value = <8>;
697 qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_22_8_MA>;
703 vdda-phy-supply = <&vdda_usb2_ss_1p2>;
704 vdda-pll-supply = <&vdda_usb2_ss_core>;
713 vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
714 vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
715 vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
716 vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
719 /* PINCTRL - additions to nodes defined in sdm845.dtsi */
724 drive-strength = <2>;
725 bias-disable;
730 pinconf-tx {
732 drive-strength = <2>;
733 bias-disable;
736 pinconf-rx {
738 drive-strength = <2>;
739 bias-pull-up;
744 gpio-reserved-ranges = <0 4>, <81 4>;
746 sdc2_clk: sdc2-clk {
749 bias-disable;
755 drive-strength = <16>;
759 sdc2_cmd: sdc2-cmd {
762 bias-pull-up;
763 drive-strength = <16>;
767 sdc2_data: sdc2-data {
770 bias-pull-up;
771 drive-strength = <16>;
775 sd_card_det_n: sd-card-det-n {
783 bias-pull-up;