Lines Matching +full:sustainable +full:- +full:power
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
8 /* This file must be included after sc7180-trogdor.dtsi */
11 /* BOARD-SPECIFIC TOP LEVEL NODES */
15 #sound-dai-cells = <0>;
20 #sound-dai-cells = <0>;
25 #sound-dai-cells = <0>;
28 pp3300_touch: pp3300-touch {
29 compatible = "regulator-fixed";
30 regulator-name = "pp3300_touch";
32 regulator-min-microvolt = <3300000>;
33 regulator-max-microvolt = <3300000>;
36 enable-active-high;
37 pinctrl-names = "default";
38 pinctrl-0 = <&en_pp3300_touch>;
40 vin-supply = <&pp3300_a>;
43 thermal-zones {
44 skin_temp_thermal: skin-temp-thermal {
45 polling-delay-passive = <250>;
46 polling-delay = <0>;
48 thermal-sensors = <&pm6150_adc_tm 1>;
49 sustainable-power = <965>;
52 skin_temp_alert0: trip-point0 {
58 skin_temp_alert1: trip-point1 {
64 skin-temp-crit {
71 cooling-maps {
74 cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
80 cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
90 clock-frequency = <400000>;
95 pinctrl-names = "default";
96 pinctrl-0 = <&ts_int_l>, <&ts_reset_l>;
98 interrupt-parent = <&tlmm>;
101 reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
103 vdd-supply = <&pp3300_touch>;
118 keyboard-controller {
119 compatible = "google,cros-ec-keyb-switches";
125 enable-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
126 /delete-property/ backlight;
130 skin-temp-thermistor@4d {
133 qcom,hw-settle-time = <200>;
140 skin-temp-thermistor@1 {
142 io-channels = <&pm6150_adc ADC5_AMUX_THM1_100K_PU>;
144 qcom,hw-settle-time-us = <200>;
169 qcom,playback-sd-lines = <0 1>;
173 sound-dai = <&max98360a>, <&max98360a_1>, <&max98360a_2>, <&max98360a_3> ;
177 qcom,ath10k-calibration-variant = "GO_HOMESTAR";
180 /* PINCTRL - modifications to sc7180-trogdor.dtsi */
205 output-low;
209 /* PINCTRL - board-specific pinctrl */
212 gpio-line-names = "HUB_RST_L",
336 en_pp3300_touch: en-pp3300-touch {
344 drive-strength = <2>;
345 bias-disable;