Lines Matching +full:vccq2 +full:- +full:max +full:- +full:microamp
1 // SPDX-License-Identifier: BSD-3-Clause
6 /dts-v1/;
8 #include <dt-bindings/leds/common.h>
9 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
10 #include <dt-bindings/sound/qcom,q6afe.h>
11 #include <dt-bindings/sound/qcom,q6asm.h>
19 compatible = "qcom,qrb5165-rb5", "qcom,sm8250";
20 qcom,msm-id = <455 0x20001>;
21 qcom,board-id = <11 3>;
29 stdout-path = "serial0:115200n8";
33 clk40M: can-clock {
34 compatible = "fixed-clock";
35 #clock-cells = <0>;
36 clock-frequency = <40000000>;
39 dc12v: dc12v-regulator {
40 compatible = "regulator-fixed";
41 regulator-name = "DC12V";
42 regulator-min-microvolt = <12000000>;
43 regulator-max-microvolt = <12000000>;
44 regulator-always-on;
47 hdmi-out {
48 compatible = "hdmi-connector";
53 remote-endpoint = <<9611_out>;
59 compatible = "gpio-leds";
61 led-user4 {
66 linux,default-trigger = "panic-indicator";
67 default-state = "off";
70 led-wlan {
75 linux,default-trigger = "phy0tx";
76 default-state = "off";
79 led-bt {
84 linux,default-trigger = "bluetooth-power";
85 default-state = "off";
89 lt9611_1v2: lt9611-vdd12-regulator {
90 compatible = "regulator-fixed";
91 regulator-name = "LT9611_1V2";
93 vin-supply = <&vdc_3v3>;
94 regulator-min-microvolt = <1200000>;
95 regulator-max-microvolt = <1200000>;
98 lt9611_3v3: lt9611-3v3 {
99 compatible = "regulator-fixed";
100 regulator-name = "LT9611_3V3";
102 vin-supply = <&vdc_3v3>;
103 regulator-min-microvolt = <3300000>;
104 regulator-max-microvolt = <3300000>;
105 regulator-boot-on;
106 regulator-always-on;
109 thermal-zones {
110 conn-thermal {
111 polling-delay-passive = <0>;
112 polling-delay = <0>;
113 thermal-sensors = <&pm8150b_adc_tm 0>;
116 active-config0 {
124 pm8150l-thermal {
125 polling-delay-passive = <0>;
126 polling-delay = <0>;
127 thermal-sensors = <&pm8150l_adc_tm 1>;
130 active-config0 {
138 skin-msm-thermal {
139 polling-delay-passive = <0>;
140 polling-delay = <0>;
141 thermal-sensors = <&pm8150l_adc_tm 0>;
144 active-config0 {
152 wifi-thermal {
153 polling-delay-passive = <0>;
154 polling-delay = <0>;
155 thermal-sensors = <&pm8150_adc_tm 1>;
158 active-config0 {
166 xo-thermal {
167 polling-delay-passive = <0>;
168 polling-delay = <0>;
169 thermal-sensors = <&pm8150_adc_tm 0>;
172 active-config0 {
181 vbat: vbat-regulator {
182 compatible = "regulator-fixed";
183 regulator-name = "VBAT";
184 vin-supply = <&vreg_l11c_3p3>;
185 regulator-min-microvolt = <4200000>;
186 regulator-max-microvolt = <4200000>;
187 regulator-always-on;
190 vbat_som: vbat-som-regulator {
191 compatible = "regulator-fixed";
192 regulator-name = "VBAT_SOM";
193 vin-supply = <&dc12v>;
194 regulator-min-microvolt = <4200000>;
195 regulator-max-microvolt = <4200000>;
196 regulator-always-on;
199 vdc_3v3: vdc-3v3-regulator {
200 compatible = "regulator-fixed";
201 regulator-name = "VDC_3V3";
202 vin-supply = <&vreg_l11c_3p3>;
203 regulator-min-microvolt = <3300000>;
204 regulator-max-microvolt = <3300000>;
205 regulator-always-on;
208 vdc_5v: vdc-5v-regulator {
209 compatible = "regulator-fixed";
210 regulator-name = "VDC_5V";
212 regulator-min-microvolt = <5000000>;
213 regulator-max-microvolt = <5000000>;
214 regulator-always-on;
215 vin-supply = <&vreg_l11c_3p3>;
218 vph_pwr: vph-pwr-regulator {
219 compatible = "regulator-fixed";
220 regulator-name = "vph_pwr";
221 regulator-min-microvolt = <3700000>;
222 regulator-max-microvolt = <3700000>;
223 regulator-always-on;
226 vreg_s4a_1p8: vreg-s4a-1p8 {
227 compatible = "regulator-fixed";
228 regulator-name = "vreg_s4a_1p8";
229 regulator-min-microvolt = <1800000>;
230 regulator-max-microvolt = <1800000>;
231 regulator-always-on;
237 firmware-name = "qcom/sm8250/adsp.mbn";
241 pm8009-rpmh-regulators {
242 compatible = "qcom,pm8009-1-rpmh-regulators";
243 qcom,pmic-id = "f";
245 vdd-s1-supply = <&vph_pwr>;
246 vdd-s2-supply = <&vph_pwr>;
247 vdd-l2-supply = <&vreg_s8c_1p3>;
248 vdd-l5-l6-supply = <&vreg_bob>;
249 vdd-l7-supply = <&vreg_s4a_1p8>;
252 regulator-name = "vreg_s2f_0p95";
253 regulator-min-microvolt = <900000>;
254 regulator-max-microvolt = <952000>;
255 regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
259 regulator-name = "vreg_l1f_1p1";
260 regulator-min-microvolt = <1104000>;
261 regulator-max-microvolt = <1104000>;
262 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
266 regulator-name = "vreg_l2f_1p2";
267 regulator-min-microvolt = <1200000>;
268 regulator-max-microvolt = <1200000>;
269 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
273 regulator-name = "vreg_l6f_2p8";
274 regulator-min-microvolt = <2800000>;
275 regulator-max-microvolt = <2800000>;
276 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
280 regulator-name = "vreg_l7f_1p8";
281 regulator-min-microvolt = <1800000>;
282 regulator-max-microvolt = <1800000>;
283 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
287 pm8150-rpmh-regulators {
288 compatible = "qcom,pm8150-rpmh-regulators";
289 qcom,pmic-id = "a";
291 vdd-s1-supply = <&vph_pwr>;
292 vdd-s2-supply = <&vph_pwr>;
293 vdd-s3-supply = <&vph_pwr>;
294 vdd-s4-supply = <&vph_pwr>;
295 vdd-s5-supply = <&vph_pwr>;
296 vdd-s6-supply = <&vph_pwr>;
297 vdd-s7-supply = <&vph_pwr>;
298 vdd-s8-supply = <&vph_pwr>;
299 vdd-s9-supply = <&vph_pwr>;
300 vdd-s10-supply = <&vph_pwr>;
301 vdd-l2-l10-supply = <&vreg_bob>;
302 vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p95>;
303 vdd-l6-l9-supply = <&vreg_s8c_1p3>;
304 vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>;
305 vdd-l13-l16-l17-supply = <&vreg_bob>;
308 regulator-name = "vreg_l2a_3p1";
309 regulator-min-microvolt = <3072000>;
310 regulator-max-microvolt = <3072000>;
311 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
315 regulator-name = "vreg_l3a_0p9";
316 regulator-min-microvolt = <928000>;
317 regulator-max-microvolt = <932000>;
318 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
322 regulator-name = "vreg_l5a_0p88";
323 regulator-min-microvolt = <880000>;
324 regulator-max-microvolt = <880000>;
325 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
329 regulator-name = "vreg_l6a_1p2";
330 regulator-min-microvolt = <1200000>;
331 regulator-max-microvolt = <1200000>;
332 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
336 regulator-name = "vreg_l7a_1p7";
337 regulator-min-microvolt = <1704000>;
338 regulator-max-microvolt = <1800000>;
339 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
343 regulator-name = "vreg_l9a_1p2";
344 regulator-min-microvolt = <1200000>;
345 regulator-max-microvolt = <1200000>;
346 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
350 regulator-name = "vreg_l10a_1p8";
351 regulator-min-microvolt = <1800000>;
352 regulator-max-microvolt = <1800000>;
353 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
357 regulator-name = "vreg_l12a_1p8";
358 regulator-min-microvolt = <1800000>;
359 regulator-max-microvolt = <1800000>;
360 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
364 regulator-name = "vreg_l13a_ts_3p0";
365 regulator-min-microvolt = <3008000>;
366 regulator-max-microvolt = <3008000>;
367 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
371 regulator-name = "vreg_l14a_1p8";
372 regulator-min-microvolt = <1800000>;
373 regulator-max-microvolt = <1880000>;
374 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
378 regulator-name = "vreg_l15a_1p8";
379 regulator-min-microvolt = <1800000>;
380 regulator-max-microvolt = <1800000>;
381 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
385 regulator-name = "vreg_l16a_2p7";
386 regulator-min-microvolt = <2704000>;
387 regulator-max-microvolt = <2960000>;
388 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
392 regulator-name = "vreg_l17a_3p0";
393 regulator-min-microvolt = <2856000>;
394 regulator-max-microvolt = <3008000>;
395 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
399 regulator-name = "vreg_l18a_0p92";
400 regulator-min-microvolt = <800000>;
401 regulator-max-microvolt = <912000>;
402 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
406 regulator-name = "vreg_s5a_1p9";
407 regulator-min-microvolt = <1904000>;
408 regulator-max-microvolt = <2000000>;
409 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
413 regulator-name = "vreg_s6a_0p95";
414 regulator-min-microvolt = <920000>;
415 regulator-max-microvolt = <1128000>;
416 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
420 pm8150l-rpmh-regulators {
421 compatible = "qcom,pm8150l-rpmh-regulators";
422 qcom,pmic-id = "c";
424 vdd-s1-supply = <&vph_pwr>;
425 vdd-s2-supply = <&vph_pwr>;
426 vdd-s3-supply = <&vph_pwr>;
427 vdd-s4-supply = <&vph_pwr>;
428 vdd-s5-supply = <&vph_pwr>;
429 vdd-s6-supply = <&vph_pwr>;
430 vdd-s7-supply = <&vph_pwr>;
431 vdd-s8-supply = <&vph_pwr>;
432 vdd-l1-l8-supply = <&vreg_s4a_1p8>;
433 vdd-l2-l3-supply = <&vreg_s8c_1p3>;
434 vdd-l4-l5-l6-supply = <&vreg_bob>;
435 vdd-l7-l11-supply = <&vreg_bob>;
436 vdd-l9-l10-supply = <&vreg_bob>;
437 vdd-bob-supply = <&vph_pwr>;
440 regulator-name = "vreg_bob";
441 regulator-min-microvolt = <3008000>;
442 regulator-max-microvolt = <4000000>;
443 regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
447 regulator-name = "vreg_l1c_1p8";
448 regulator-min-microvolt = <1800000>;
449 regulator-max-microvolt = <1800000>;
450 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
454 regulator-name = "vreg_l2c_1p2";
455 regulator-min-microvolt = <1200000>;
456 regulator-max-microvolt = <1200000>;
457 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
461 regulator-name = "vreg_l3c_0p8";
462 regulator-min-microvolt = <800000>;
463 regulator-max-microvolt = <800000>;
464 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
468 regulator-name = "vreg_l4c_1p7";
469 regulator-min-microvolt = <1704000>;
470 regulator-max-microvolt = <2928000>;
471 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
475 regulator-name = "vreg_l5c_1p8";
476 regulator-min-microvolt = <1800000>;
477 regulator-max-microvolt = <2928000>;
478 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
482 regulator-name = "vreg_l6c_2p96";
483 regulator-min-microvolt = <1800000>;
484 regulator-max-microvolt = <2960000>;
485 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
489 regulator-name = "vreg_l7c_cam_vcm0_2p85";
490 regulator-min-microvolt = <2856000>;
491 regulator-max-microvolt = <3104000>;
492 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
496 regulator-name = "vreg_l8c_1p8";
497 regulator-min-microvolt = <1800000>;
498 regulator-max-microvolt = <1800000>;
499 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
503 regulator-name = "vreg_l9c_2p96";
504 regulator-min-microvolt = <2704000>;
505 regulator-max-microvolt = <2960000>;
506 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
510 regulator-name = "vreg_l10c_3p0";
511 regulator-min-microvolt = <3000000>;
512 regulator-max-microvolt = <3000000>;
513 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
517 regulator-name = "vreg_l11c_3p3";
518 regulator-min-microvolt = <3296000>;
519 regulator-max-microvolt = <3296000>;
520 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
521 regulator-always-on;
525 regulator-name = "vreg_s8c_1p3";
526 regulator-min-microvolt = <1352000>;
527 regulator-max-microvolt = <1352000>;
528 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
535 firmware-name = "qcom/sm8250/cdsp.mbn";
540 vdda-supply = <&vreg_l9a_1p2>;
543 qcom,dual-dsi-mode;
544 qcom,master-dsi;
550 remote-endpoint = <<9611_a>;
551 data-lanes = <0 1 2 3>;
559 vdds-supply = <&vreg_l5a_0p88>;
569 zap-shader {
570 memory-region = <&gpu_mem>;
571 firmware-name = "qcom/sm8250/a650_zap.mbn";
575 /* LS-I2C0 */
582 clock-frequency = <400000>;
584 lt9611_codec: hdmi-bridge@2b {
587 #sound-dai-cells = <1>;
589 interrupts-extended = <&tlmm 63 IRQ_TYPE_EDGE_FALLING>;
591 reset-gpios = <&pm8150l_gpios 5 GPIO_ACTIVE_HIGH>;
593 vdd-supply = <<9611_1v2>;
594 vcc-supply = <<9611_3v3>;
596 pinctrl-names = "default";
597 pinctrl-0 = <<9611_irq_pin <9611_rst_pin>;
600 #address-cells = <1>;
601 #size-cells = <0>;
607 remote-endpoint = <&dsi0_out>;
616 remote-endpoint = <&dsi1_out>;
625 remote-endpoint = <&hdmi_con>;
633 /* LS-I2C1 */
647 xo-therm@4c {
650 qcom,hw-settle-time = <200>;
653 wifi-therm@4e {
656 qcom,hw-settle-time = <200>;
663 xo-therm@0 {
665 io-channels = <&pm8150_adc ADC5_XO_THERM_100K_PU>;
667 qcom,hw-settle-time-us = <200>;
670 wifi-therm@1 {
672 io-channels = <&pm8150_adc ADC5_AMUX_THM2_100K_PU>;
674 qcom,hw-settle-time-us = <200>;
684 vdda-phy-supply = <&vreg_l5a_0p88>;
685 vdda-pll-supply = <&vreg_l9a_1p2>;
694 vdda-phy-supply = <&vreg_l5a_0p88>;
695 vdda-pll-supply = <&vreg_l9a_1p2>;
704 vdda-phy-supply = <&vreg_l5a_0p88>;
705 vdda-pll-supply = <&vreg_l9a_1p2>;
709 gpio-reserved-ranges = <1 1>, <3 2>, <7 1>;
710 gpio-line-names =
713 "PM_GPIO-F",
724 conn-therm@4f {
727 qcom,hw-settle-time = <200>;
734 conn-therm@0 {
736 io-channels = <&pm8150b_adc ADC5_AMUX_THM3_100K_PU>;
738 qcom,hw-settle-time-us = <200>;
743 gpio-line-names =
759 skin-msm-therm@4e {
762 qcom,hw-settle-time = <200>;
765 pm8150l-therm@4f {
768 qcom,hw-settle-time = <200>;
775 skin-msm-therm@0 {
777 io-channels = <&pm8150l_adc ADC5_AMUX_THM2_100K_PU>;
779 qcom,hw-settle-time-us = <200>;
782 pm8150l-therm@1 {
784 io-channels = <&pm8150l_adc ADC5_AMUX_THM3_100K_PU>;
786 qcom,hw-settle-time-us = <200>;
791 gpio-line-names =
797 "PM_GPIO-A", /* PWM */
801 "PM_GPIO-B",
805 lt9611_rst_pin: lt9611-rst-state {
809 output-high;
810 input-disable;
811 power-source = <0>;
818 #address-cells = <1>;
819 #size-cells = <0>;
825 function-enumerator = <3>;
827 linux,default-trigger = "heartbeat";
828 default-state = "on";
835 function-enumerator = <2>;
836 default-state = "on";
843 function-enumerator = <1>;
872 qcom,sd-lines = <0 1 2 3>;
880 qcom,sd-lines = <0>;
900 pinctrl-names = "default";
901 pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>;
902 vmmc-supply = <&vreg_l9c_2p96>;
903 vqmmc-supply = <&vreg_l6c_2p96>;
904 cd-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>;
905 bus-width = <4>;
906 no-sdio;
907 no-emmc;
911 compatible = "qcom,qrb5165-rb5-sndcard";
912 pinctrl-0 = <&tert_mi2s_active>;
913 pinctrl-names = "default";
914 model = "Qualcomm-RB5-WSA8815-Speakers-DMIC0";
915 audio-routing =
918 "VA DMIC0", "vdd-micb",
919 "VA DMIC1", "vdd-micb",
924 mm1-dai-link {
925 link-name = "MultiMedia1";
927 sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
931 mm2-dai-link {
932 link-name = "MultiMedia2";
934 sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
938 mm3-dai-link {
939 link-name = "MultiMedia3";
941 sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
945 hdmi-dai-link {
946 link-name = "HDMI Playback";
948 sound-dai = <&q6afedai TERTIARY_MI2S_RX>;
952 sound-dai = <&q6routing>;
956 sound-dai = <<9611_codec 0>;
960 dma-dai-link {
961 link-name = "WSA Playback";
963 sound-dai = <&q6afedai WSA_CODEC_DMA_RX_0>;
967 sound-dai = <&q6routing>;
971 sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&wsamacro 0>;
975 va-dai-link {
976 link-name = "VA Capture";
978 sound-dai = <&q6afedai VA_CODEC_DMA_TX_0>;
982 sound-dai = <&q6routing>;
986 sound-dai = <&vamacro 0>;
994 pinctrl-names = "default";
995 pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs_gpio>;
996 cs-gpios = <&tlmm 31 GPIO_ACTIVE_LOW>;
1002 interrupts-extended = <&tlmm 15 IRQ_TYPE_LEVEL_LOW>;
1003 spi-max-frequency = <10000000>;
1004 vdd-supply = <&vdc_5v>;
1005 xceiver-supply = <&vdc_5v>;
1010 left_spkr: wsa8810-left{
1013 powerdown-gpios = <&tlmm 130 GPIO_ACTIVE_HIGH>;
1014 #thermal-sensor-cells = <0>;
1015 sound-name-prefix = "SpkrLeft";
1016 #sound-dai-cells = <0>;
1019 right_spkr: wsa8810-right{
1022 powerdown-gpios = <&tlmm 130 GPIO_ACTIVE_HIGH>;
1023 #thermal-sensor-cells = <0>;
1024 sound-name-prefix = "SpkrRight";
1025 #sound-dai-cells = <0>;
1030 gpio-reserved-ranges = <40 4>;
1031 gpio-line-names =
1032 "GPIO-MM",
1033 "GPIO-NN",
1034 "GPIO-OO",
1035 "GPIO-PP",
1036 "GPIO-A",
1037 "GPIO-C",
1038 "GPIO-E",
1039 "GPIO-D",
1040 "I2C0-SDA",
1041 "I2C0-SCL",
1042 "GPIO-TT", /* GPIO_10 */
1046 "GPIO-X",
1054 "GPIO-AAA",
1055 "GPIO-BBB",
1056 "GPIO-CCC",
1057 "GPIO-Z",
1058 "GPIO-DDD",
1059 "GPIO-BB",
1064 "GPIO-UU",
1078 "GPIO-F",
1079 "GPIO-JJ",
1088 "GPIO-QQ",
1089 "GPIO-RR",
1096 "GPIO-AA",
1098 "GPIO-G",
1099 "GPIO-LL",
1110 "GPIO-II",
1114 "GPIO-CC",
1115 "GPIO-DD",
1116 "GPIO-EE",
1117 "GPIO-FF",
1118 "GPIO-GG",
1119 "GPIO-HH",
1120 "GPIO-VV",
1121 "GPIO-WW",
1124 "GPIO-K",
1125 "GPIO-I",
1130 "GPIO-AA", /* CSI4_MCLK */
1131 "GPIO-BB", /* CSI5_MCLK */
1132 "GPIO-KK", /* GPIO_100 */
1141 "GPIO-L",
1146 "GPIO-J",
1147 "GPIO-YY",
1148 "GPIO-H",
1149 "GPIO-ZZ",
1157 "GPIO-M",
1158 "GPIO-N",
1159 "GPIO-O",
1160 "GPIO-P",
1168 "GPIO-B",
1176 "GPIO-U",
1177 "GPIO-Y",
1178 "GPIO-R",
1179 "GPIO-Q",
1180 "GPIO-S",
1181 "GPIO-T",
1182 "GPIO-V", /* GPIO_150 */
1183 "GPIO-W",
1202 "GPIO-SS", /* GPIO_170 */
1203 "GPIO-XX",
1213 lt9611_irq_pin: lt9611-irq {
1216 bias-disable;
1219 sdc2_default_state: sdc2-default {
1222 bias-disable;
1223 drive-strength = <16>;
1228 bias-pull-up;
1229 drive-strength = <10>;
1234 bias-pull-up;
1235 drive-strength = <10>;
1239 sdc2_card_det_n: sd-card-det-n {
1242 bias-pull-up;
1253 vcc-supply = <&vreg_l17a_3p0>;
1254 vcc-max-microamp = <800000>;
1255 vccq-supply = <&vreg_l6a_1p2>;
1256 vccq-max-microamp = <800000>;
1257 vccq2-supply = <&vreg_s4a_1p8>;
1258 vccq2-max-microamp = <800000>;
1264 vdda-phy-supply = <&vreg_l5a_0p88>;
1265 vdda-pll-supply = <&vreg_l9a_1p2>;
1279 vdda-pll-supply = <&vreg_l5a_0p88>;
1280 vdda33-supply = <&vreg_l2a_3p1>;
1281 vdda18-supply = <&vreg_l12a_1p8>;
1287 vdda-phy-supply = <&vreg_l9a_1p2>;
1288 vdda-pll-supply = <&vreg_l18a_0p92>;
1302 vdda-pll-supply = <&vreg_l5a_0p88>;
1303 vdda33-supply = <&vreg_l2a_3p1>;
1304 vdda18-supply = <&vreg_l12a_1p8>;
1310 vdda-phy-supply = <&vreg_l9a_1p2>;
1311 vdda-pll-supply = <&vreg_l18a_0p92>;
1315 pinctrl-0 = <&dmic01_active>;
1316 pinctrl-names = "default";
1317 vdd-micb-supply = <&vreg_s4a_1p8>;
1318 qcom,dmic-sample-rate = <600000>;
1325 /* PINCTRL - additions to nodes defined in sm8250.dtsi */
1327 drive-strength = <6>;
1328 bias-disable;
1332 drive-strength = <6>;
1333 bias-disable;