Lines Matching +full:led +full:- +full:cur
1 // SPDX-License-Identifier: BSD-3-Clause
6 /dts-v1/;
8 #include "msm8996-xiaomi-common.dtsi"
9 #include <dt-bindings/sound/qcom,q6afe.h>
10 #include <dt-bindings/sound/qcom,q6asm.h>
11 #include <dt-bindings/sound/qcom,wcd9335.h>
12 #include <dt-bindings/input/ti-drv260x.h>
17 chassis-type = "handset";
18 qcom,msm-id = <246 0x30001>;
19 qcom,pmic-id = <0x20009 0x2000a 0x00 0x00>;
20 qcom,board-id = <31 0>;
24 compatible = "fixed-clock";
25 #clock-cells = <0>;
26 clock-frequency = <32768>;
27 clock-output-names = "divclk2";
29 pinctrl-names = "default";
30 pinctrl-0 = <&divclk2_pin_a>;
36 firmware-name = "qcom/msm8996/gemini/adsp.mbn";
43 enable-gpio = <&tlmm 93 0x00>;
45 library-sel = <DRV260X_LIB_LRA>;
46 pinctrl-names = "default","sleep";
47 pinctrl-0 = <&vibrator_default>;
48 pinctrl-1 = <&vibrator_sleep>;
54 #address-cells = <1>;
55 #size-cells = <0>;
56 enable-gpio = <&pm8994_gpios 7 1>;
57 clock-mode = /bits/8 <2>;
58 label = "button-backlight";
60 led@0 {
62 chan-name = "button-backlight";
63 led-cur = /bits/ 8 <0x32>;
64 max-cur = /bits/ 8 <0xC8>;
67 led@1 {
69 chan-name = "button-backlight1";
70 led-cur = /bits/ 8 <0x32>;
71 max-cur = /bits/ 8 <0xC8>;
78 compatible = "syna,rmi4-i2c";
80 #address-cells = <1>;
81 #size-cells = <0>;
82 interrupt-parent = <&tlmm>;
84 vdda-supply = <&vreg_l6a_1p8>;
85 vdd-supply = <&vdd_3v2_tp>;
86 reset-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>;
88 pinctrl-names = "default", "sleep";
89 pinctrl-0 = <&touchscreen_default>;
90 pinctrl-1 = <&touchscreen_sleep>;
98 vdd-supply = <&vreg_l2a_1p25>;
99 vdda-supply = <&vreg_l19a_3p3>;
100 vddio-supply = <&vreg_l14a_1p8>;
102 pinctrl-names = "default", "sleep";
103 pinctrl-0 = <&mdss_dsi_default &mdss_te_default>;
104 pinctrl-1 = <&mdss_dsi_sleep &mdss_te_sleep>;
107 compatible = "jdi,fhd-r63452";
109 reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
114 remote-endpoint = <&dsi0_out>;
121 remote-endpoint = <&panel_in>;
125 zap-shader {
126 firmware-name = "qcom/msm8996/gemini/a530_zap.mbn";
135 firmware-name = "qcom/msm8996/gemini/mba.mbn",
154 firmware-name = "qcom/msm8996/gemini/slpi.mbn";
158 compatible = "qcom,apq8096-sndcard";
160 audio-routing = "RX_BIAS", "MCLK",
165 mm1-dai-link {
166 link-name = "MultiMedia1";
168 sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
172 mm2-dai-link {
173 link-name = "MultiMedia2";
175 sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
179 mm3-dai-link {
180 link-name = "MultiMedia3";
182 sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
186 slim-dai-link {
187 link-name = "SLIM Playback";
189 sound-dai = <&q6afedai SLIMBUS_6_RX>;
193 sound-dai = <&q6routing>;
197 sound-dai = <&wcd9335 AIF4_PB>;
201 slimcap-dai-link {
202 link-name = "SLIM Capture";
204 sound-dai = <&q6afedai SLIMBUS_0_TX>;
208 sound-dai = <&q6routing>;
212 sound-dai = <&wcd9335 AIF1_CAP>;
218 firmware-name = "qcom/msm8996/gemini/venus.mbn";
222 pm8994-regulators {
224 regulator-name = "vreg_l17a_2p8";
225 regulator-min-microvolt = <2500000>;
226 regulator-max-microvolt = <2500000>;
229 regulator-name = "vreg_l29a_2p7";
230 regulator-min-microvolt = <2800000>;
231 regulator-max-microvolt = <2800000>;
237 gpio-line-names =
261 divclk2_pin_a: divclk2-state {
264 bias-disable;
265 power-source = <PM8994_GPIO_S4>;
270 gpio-line-names =
282 gpio-line-names =
296 gpio-line-names =
451 drive-strength = <10>;
452 bias-pull-up;
458 drive-strength = <2>;
459 bias-disable;
465 drive-strength = <8>;
466 bias-pull-up;
472 drive-strength = <2>;
473 bias-disable;