Lines Matching +full:qca6174 +full:- +full:bt
1 // SPDX-License-Identifier: BSD-3-Clause
6 /dts-v1/;
11 #include <dt-bindings/input/input.h>
12 #include <dt-bindings/gpio/gpio.h>
13 #include <dt-bindings/leds/common.h>
14 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
18 compatible = "simple-bus";
21 compatible = "gpio-gate-clock";
23 #clock-cells = <0>;
24 enable-gpios = <&pm8994_gpios 15 GPIO_ACTIVE_HIGH>;
26 pinctrl-names = "default";
27 pinctrl-0 = <&divclk1_default>;
31 compatible = "fixed-clock";
32 #clock-cells = <0>;
33 clock-frequency = <32768>;
34 clock-output-names = "divclk4";
36 pinctrl-names = "default";
37 pinctrl-0 = <&divclk4_pin_a>;
41 gpio-keys {
42 compatible = "gpio-keys";
44 key-vol-up {
48 wakeup-source;
49 debounce-interval = <15>;
52 key-dome {
56 wakeup-source;
57 debounce-interval = <15>;
62 compatible = "pwm-ir-tx";
65 pinctrl-names = "default";
66 pinctrl-0 = <&irled_default>;
69 reserved-memory {
72 no-map;
76 /delete-node/ mpss@88800000;
79 no-map;
82 /delete-node/ adsp@8ea00000;
85 no-map;
88 /delete-node/ slpi@90500000;
91 no-map;
94 /delete-node/ gpu@90f00000;
96 compatible = "shared-dma-pool";
98 no-map;
101 /delete-node/ venus@91000000;
104 no-map;
110 no-map;
112 record-size = <0x8000>;
113 console-size = <0x80000>;
114 ftrace-size = <0x20000>;
115 pmsg-size = <0x40000>;
118 /delete-node/ rmtfs;
120 compatible = "qcom,rmtfs-mem";
122 no-map;
124 qcom,client-id = <1>;
128 /delete-node/ mba@91500000;
131 no-map;
135 vph_pwr: vph-pwr-regulator {
136 compatible = "regulator-fixed";
137 regulator-name = "vph_pwr";
138 regulator-min-microvolt = <3800000>;
139 regulator-max-microvolt = <3800000>;
140 regulator-always-on;
141 regulator-boot-on;
144 vdd_3v2_tp: vdd-3v2-tp {
145 compatible = "regulator-fixed";
146 regulator-name = "vdd_3v2_tp";
147 regulator-min-microvolt = <3200000>;
148 regulator-max-microvolt = <3200000>;
149 startup-delay-us = <4000>;
150 vin-supply = <&vph_pwr>;
153 enable-active-high;
156 vdd_3v3: rome-vreg {
157 compatible = "regulator-fixed";
158 regulator-name = "vdd_3v3";
159 regulator-min-microvolt = <3300000>;
160 regulator-max-microvolt = <3300000>;
161 startup-delay-us = <4000>;
162 vin-supply = <&vph_pwr_bbyp>;
165 enable-active-high;
166 pinctrl-names = "default";
167 pinctrl-0 = <&rome_enable_default>;
169 /* Required by QCA6174a - vddpe-3v3 */
170 regulator-always-on;
174 wlan_en: wlan-en-1-8v {
175 compatible = "regulator-fixed";
176 regulator-name = "wlan-en-regulator";
177 regulator-min-microvolt = <1800000>;
178 regulator-max-microvolt = <1800000>;
182 startup-delay-us = <70000>;
183 enable-active-high;
184 pinctrl-names = "default";
185 pinctrl-0 = <&wlan_en_default>;
196 clock-frequency = <400000>;
199 compatible = "nxp,nxp-nci-i2c";
203 interrupt-parent = <&tlmm>;
206 enable-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
207 firmware-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
209 pinctrl-names = "default";
210 pinctrl-0 = <&nfc_default>;
221 interrupt-parent = <&tlmm>;
236 compatible = "qcom,qca6174-bt";
238 enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
246 vdd-supply = <&vreg_l2a_1p25>;
247 vddio-supply = <&vreg_l14a_1p8>;
249 pinctrl-names = "default", "sleep";
250 pinctrl-0 = <&mdss_dsi_default &mdss_te_default>;
251 pinctrl-1 = <&mdss_dsi_sleep &mdss_te_sleep>;
257 data-lanes = <0 1 2 3>;
263 vcca-supply = <&vreg_l28a_0p925>;
275 vdd-gfx-supply = <&vdd_gfx>;
281 pll-supply = <&vreg_l12a_1p8>;
288 vddpe-3v3-supply = <&wlan_en>;
289 vdda-supply = <&vreg_l28a_0p925>;
291 perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
292 wake-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
298 vdda-phy-supply = <&vreg_l28a_0p925>;
299 vdda-pll-supply = <&vreg_l12a_1p8>;
311 qcom,power-source = <1>;
317 qcom,power-source = <1>;
319 multi-led {
323 #address-cells = <1>;
324 #size-cells = <0>;
346 px-supply = <&vreg_lvs2a_1p8>;
353 qcom,select-utmi-as-pipe-clk;
359 /* usb3-phy is not used on this device */
361 phy-names = "usb2-phy";
363 maximum-speed = "high-speed";
364 snps,is-utmi-l1-suspend;
365 snps,usb2-gadget-lpm-disable;
366 snps,hird-threshold = /bits/ 8 <0>;
373 vdda-pll-supply = <&vreg_l12a_1p8>;
374 vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
380 vcc-supply = <&vreg_l20a_2p95>;
381 vccq-supply = <&vreg_l25a_1p2>;
382 vccq2-supply = <&vreg_s4a_1p8>;
384 vcc-max-microamp = <600000>;
385 vccq-max-microamp = <450000>;
386 vccq2-max-microamp = <450000>;
392 vdda-phy-supply = <&vreg_l28a_0p925>;
393 vdda-pll-supply = <&vreg_l12a_1p8>;
394 vddp-ref-clk-supply = <&vreg_l25a_1p2>;
402 clock-names = "mclk", "slimbus";
406 vdd-buck-supply = <&vreg_s4a_1p8>;
407 vdd-buck-sido-supply = <&vreg_s4a_1p8>;
408 vdd-rx-supply = <&vreg_s4a_1p8>;
409 vdd-tx-supply = <&vreg_s4a_1p8>;
410 vdd-vbat-supply = <&vph_pwr>;
411 vdd-micbias-supply = <&vph_pwr_bbyp>;
412 vdd-io-supply = <&vreg_s4a_1p8>;
416 pm8994-regulators {
417 compatible = "qcom,rpm-pm8994-regulators";
419 vdd_s1-supply = <&vph_pwr>;
420 vdd_s2-supply = <&vph_pwr>;
421 vdd_s3-supply = <&vph_pwr>;
422 vdd_s4-supply = <&vph_pwr>;
423 vdd_s5-supply = <&vph_pwr>;
424 vdd_s6-supply = <&vph_pwr>;
425 vdd_s7-supply = <&vph_pwr>;
426 vdd_s8-supply = <&vph_pwr>;
427 vdd_s9-supply = <&vph_pwr>;
428 vdd_s10-supply = <&vph_pwr>;
429 vdd_s11-supply = <&vph_pwr>;
430 vdd_s12-supply = <&vph_pwr>;
431 vdd_l1-supply = <&vreg_s1b_1p025>;
432 vdd_l2_l26_l28-supply = <&vreg_s3a_1p3>;
433 vdd_l3_l11-supply = <&vreg_s3a_1p3>;
434 vdd_l4_l27_l31-supply = <&vreg_s3a_1p3>;
435 vdd_l5_l7-supply = <&vreg_s5a_2p15>;
436 vdd_l6_l12_l32-supply = <&vreg_s5a_2p15>;
437 vdd_l8_l16_l30-supply = <&vph_pwr>;
438 vdd_l9_l10_l18_l22-supply = <&vph_pwr_bbyp>;
439 vdd_l13_l19_l23_l24-supply = <&vph_pwr_bbyp>;
440 vdd_l14_l15-supply = <&vreg_s5a_2p15>;
441 vdd_l17_l29-supply = <&vph_pwr_bbyp>;
442 vdd_l20_l21-supply = <&vph_pwr_bbyp>;
443 vdd_l25-supply = <&vreg_s3a_1p3>;
444 vdd_lvs1_2-supply = <&vreg_s4a_1p8>;
447 regulator-name = "vreg_s3a_1p3";
448 regulator-min-microvolt = <1300000>;
449 regulator-max-microvolt = <1300000>;
451 /* Required by QCA6174a - vdd-core */
452 regulator-always-on;
455 regulator-name = "vreg_s4a_1p8";
456 regulator-min-microvolt = <1800000>;
457 regulator-max-microvolt = <1800000>;
458 regulator-allow-set-load;
460 /* Required by QCA6174a - vddio */
461 regulator-always-on;
464 regulator-name = "vreg_s5a_2p15";
465 regulator-min-microvolt = <2150000>;
466 regulator-max-microvolt = <2150000>;
469 regulator-name = "vreg_s7a_0p8";
470 regulator-min-microvolt = <800000>;
471 regulator-max-microvolt = <800000>;
474 regulator-name = "vreg_l1a_1p0";
475 regulator-min-microvolt = <1000000>;
476 regulator-max-microvolt = <1000000>;
479 regulator-name = "vreg_l2a_1p25";
480 regulator-min-microvolt = <1250000>;
481 regulator-max-microvolt = <1250000>;
484 regulator-name = "vreg_l4a_1p225";
485 regulator-min-microvolt = <1225000>;
486 regulator-max-microvolt = <1225000>;
489 regulator-name = "vreg_l6a_1p8";
490 regulator-min-microvolt = <1800000>;
491 regulator-max-microvolt = <1800000>;
494 regulator-name = "vreg_l8a_1p8";
495 regulator-min-microvolt = <1800000>;
496 regulator-max-microvolt = <1800000>;
499 regulator-name = "vreg_l9a_1p8";
500 regulator-min-microvolt = <1800000>;
501 regulator-max-microvolt = <1800000>;
504 regulator-name = "vreg_l10a_1p8";
505 regulator-min-microvolt = <1800000>;
506 regulator-max-microvolt = <1800000>;
509 regulator-name = "vreg_l12a_1p8";
510 regulator-min-microvolt = <1800000>;
511 regulator-max-microvolt = <1800000>;
512 regulator-allow-set-load;
515 regulator-name = "vreg_l13a_2p95";
516 regulator-min-microvolt = <1800000>;
517 regulator-max-microvolt = <2950000>;
520 regulator-name = "vreg_l14a_1p8";
521 regulator-min-microvolt = <1800000>;
522 regulator-max-microvolt = <1800000>;
525 regulator-name = "vreg_l15a_1p8";
526 regulator-min-microvolt = <1800000>;
527 regulator-max-microvolt = <1800000>;
530 regulator-name = "vreg_l16a_2p7";
531 regulator-min-microvolt = <2700000>;
532 regulator-max-microvolt = <2700000>;
535 regulator-name = "vreg_l19a_3p3";
536 regulator-min-microvolt = <3000000>;
537 regulator-max-microvolt = <3000000>;
540 regulator-name = "vreg_l20a_2p95";
541 regulator-min-microvolt = <2950000>;
542 regulator-max-microvolt = <2950000>;
543 regulator-allow-set-load;
546 regulator-name = "vreg_l21a_2p95";
547 regulator-min-microvolt = <3300000>;
548 regulator-max-microvolt = <3300000>;
549 regulator-always-on;
552 regulator-name = "vreg_l23a_2p8";
553 regulator-min-microvolt = <2800000>;
554 regulator-max-microvolt = <2800000>;
557 regulator-name = "vreg_l24a_3p075";
558 regulator-min-microvolt = <3075000>;
559 regulator-max-microvolt = <3075000>;
562 regulator-name = "vreg_l25a_1p2";
563 regulator-min-microvolt = <1200000>;
564 regulator-max-microvolt = <1200000>;
565 regulator-allow-set-load;
568 regulator-name = "vreg_l27a_1p2";
569 regulator-min-microvolt = <1200000>;
570 regulator-max-microvolt = <1200000>;
573 regulator-name = "vreg_l28a_0p925";
574 regulator-min-microvolt = <925000>;
575 regulator-max-microvolt = <925000>;
576 regulator-allow-set-load;
579 regulator-name = "vreg_l30a_1p8";
580 regulator-min-microvolt = <1800000>;
581 regulator-max-microvolt = <1800000>;
583 /* Required by QCA6174a - vddio-xtal */
584 regulator-always-on;
587 regulator-name = "vreg_l32a_1p8";
588 regulator-min-microvolt = <1800000>;
589 regulator-max-microvolt = <1800000>;
592 regulator-min-microvolt = <1800000>;
593 regulator-max-microvolt = <1800000>;
596 regulator-min-microvolt = <1800000>;
597 regulator-max-microvolt = <1800000>;
601 pmi8994-regulators {
602 compatible = "qcom,rpm-pmi8994-regulators";
604 vdd_s1-supply = <&vph_pwr>;
605 vdd_s2-supply = <&vph_pwr>;
606 vdd_s3-supply = <&vph_pwr>;
607 vdd_bst_byp-supply = <&vph_pwr>;
610 regulator-name = "vreg_s1b_1p025";
611 regulator-min-microvolt = <1025000>;
612 regulator-max-microvolt = <1025000>;
615 vph_pwr_bbyp: boost-bypass {
616 regulator-name = "vph_pwr_bbyp";
617 regulator-min-microvolt = <3150000>;
618 regulator-max-microvolt = <3600000>;
624 qcom,saw-reg = <&saw3>;
626 qcom,saw-slave;
629 qcom,saw-slave;
632 qcom,saw-slave;
635 qcom,saw-leader;
636 regulator-name = "vreg_apc_0p8";
637 regulator-min-microvolt = <470000>;
638 regulator-max-microvolt = <1140000>;
639 regulator-max-step-microvolt = <150000>;
640 regulator-always-on;
646 regulator-name = "vdd_gfx";
647 regulator-min-microvolt = <400000>;
648 regulator-max-microvolt = <1015000>;
649 regulator-enable-ramp-delay = <500>;
654 irled_default: irled-default-state {
657 output-low;
658 qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
659 power-source = <PM8994_GPIO_S4>;
660 bias-disable;
663 wlan_en_default: wlan-en-state {
666 output-low;
667 qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
668 power-source = <PM8994_GPIO_S4>;
669 bias-disable;
672 rome_enable_default: rome-enable-state {
675 output-high;
676 qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
677 power-source = <PM8994_GPIO_VPH>;
680 divclk1_default: divclk1-state {
683 bias-disable;
684 power-source = <PM8994_GPIO_S4>;
685 qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
688 divclk4_pin_a: divclk4-state {
691 bias-disable;
692 power-source = <PM8994_GPIO_S4>;
700 drive-strength = <8>;
701 bias-disable;
707 drive-strength = <2>;
708 bias-pull-down;
714 drive-strength = <2>;
715 bias-pull-down;
721 drive-strength = <2>;
722 bias-pull-down;
728 drive-strength = <16>;
729 bias-pull-up;