Lines Matching +full:cts +full:- +full:gpios
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 /dts-v1/;
8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/input/linux-event-codes.h>
10 #include <dt-bindings/leds/common.h>
11 #include <dt-bindings/net/ti-dp83867.h>
12 #include <dt-bindings/phy/phy-imx8-pcie.h>
18 compatible = "gw,imx8mm-gw7902", "fsl,imx8mm";
27 stdout-path = &uart2;
36 compatible = "fixed-clock";
37 #clock-cells = <0>;
38 clock-frequency = <20000000>;
39 clock-output-names = "can20m";
42 gpio-keys {
43 compatible = "gpio-keys";
45 key-user-pb {
47 gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
51 key-user-pb1x {
54 interrupt-parent = <&gsc>;
58 key-erased {
61 interrupt-parent = <&gsc>;
65 key-eeprom-wp {
68 interrupt-parent = <&gsc>;
72 key-tamper {
75 interrupt-parent = <&gsc>;
79 switch-hold {
82 interrupt-parent = <&gsc>;
87 led-controller {
88 compatible = "gpio-leds";
89 pinctrl-names = "default";
90 pinctrl-0 = <&pinctrl_gpio_leds>;
92 led-0 {
96 gpios = <&gpio3 21 GPIO_ACTIVE_LOW>;
97 default-state = "off";
100 led-1 {
104 gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
105 default-state = "off";
108 led-2 {
112 gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
113 default-state = "off";
116 led-3 {
120 gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
121 default-state = "off";
124 led-4 {
128 gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
129 default-state = "off";
133 pcie0_refclk: pcie0-refclk {
134 compatible = "fixed-clock";
135 #clock-cells = <0>;
136 clock-frequency = <100000000>;
140 compatible = "pps-gpio";
141 pinctrl-names = "default";
142 pinctrl-0 = <&pinctrl_pps>;
143 gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>;
147 reg_3p3v: regulator-3p3v {
148 compatible = "regulator-fixed";
149 regulator-name = "3P3V";
150 regulator-min-microvolt = <3300000>;
151 regulator-max-microvolt = <3300000>;
152 regulator-always-on;
155 reg_usb1_vbus: regulator-usb1 {
156 compatible = "regulator-fixed";
157 pinctrl-names = "default";
158 pinctrl-0 = <&pinctrl_reg_usb1>;
159 regulator-name = "usb_usb1_vbus";
161 enable-active-high;
162 regulator-min-microvolt = <5000000>;
163 regulator-max-microvolt = <5000000>;
166 reg_wifi: regulator-wifi {
167 compatible = "regulator-fixed";
168 pinctrl-names = "default";
169 pinctrl-0 = <&pinctrl_reg_wl>;
170 regulator-name = "wifi";
172 enable-active-high;
173 startup-delay-us = <100>;
174 regulator-min-microvolt = <3300000>;
175 regulator-max-microvolt = <3300000>;
180 cpu-supply = <&buck2>;
184 cpu-supply = <&buck2>;
188 cpu-supply = <&buck2>;
192 cpu-supply = <&buck2>;
196 operating-points-v2 = <&ddrc_opp_table>;
198 ddrc_opp_table: opp-table {
199 compatible = "operating-points-v2";
201 opp-25M {
202 opp-hz = /bits/ 64 <25000000>;
205 opp-100M {
206 opp-hz = /bits/ 64 <100000000>;
209 opp-750M {
210 opp-hz = /bits/ 64 <750000000>;
216 pinctrl-names = "default";
217 pinctrl-0 = <&pinctrl_spi1>;
218 cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
225 interrupt-parent = <&gpio2>;
227 spi-max-frequency = <10000000>;
231 /* off-board header */
233 pinctrl-names = "default";
234 pinctrl-0 = <&pinctrl_spi2>;
235 cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
240 pinctrl-names = "default";
241 pinctrl-0 = <&pinctrl_fec1>;
242 phy-mode = "rgmii-id";
243 phy-handle = <ðphy0>;
244 local-mac-address = [00 00 00 00 00 00];
248 #address-cells = <1>;
249 #size-cells = <0>;
251 ethphy0: ethernet-phy@0 {
252 compatible = "ethernet-phy-ieee802.3-c22";
254 ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
255 ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
256 tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
257 rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
263 gpio-line-names = "", "", "", "", "", "", "", "",
270 gpio-line-names = "", "", "", "", "", "", "", "",
277 gpio-line-names = "", "m2_gdis#", "", "", "", "", "", "m2_off#",
284 gpio-line-names = "", "", "", "", "", "", "", "",
292 gpio-line-names = "", "", "", "mipi_gpio4",
300 clock-frequency = <100000>;
301 pinctrl-names = "default";
302 pinctrl-0 = <&pinctrl_i2c1>;
308 pinctrl-0 = <&pinctrl_gsc>;
309 interrupt-parent = <&gpio2>;
311 interrupt-controller;
312 #interrupt-cells = <1>;
315 compatible = "gw,gsc-adc";
316 #address-cells = <1>;
317 #size-cells = <0>;
335 gw,voltage-divider-ohms = <22100 1000>;
336 gw,voltage-offset-microvolt = <700000>;
343 gw,voltage-divider-ohms = <10000 10000>;
350 gw,voltage-divider-ohms = <10000 10000>;
393 gw,voltage-divider-ohms = <10000 10000>;
400 gw,voltage-divider-ohms = <10000 10000>;
407 gw,voltage-divider-ohms = <10000 10000>;
415 gpio-controller;
416 #gpio-cells = <2>;
417 interrupt-parent = <&gsc>;
424 pinctrl-names = "default";
425 pinctrl-0 = <&pinctrl_pmic>;
426 interrupt-parent = <&gpio3>;
428 rohm,reset-snvs-powered;
429 #clock-cells = <0>;
431 clock-output-names = "clk-32k-out";
434 /* vdd_soc: 0.805-0.900V (typ=0.8V) */
436 regulator-name = "buck1";
437 regulator-min-microvolt = <700000>;
438 regulator-max-microvolt = <1300000>;
439 regulator-boot-on;
440 regulator-always-on;
441 regulator-ramp-delay = <1250>;
444 /* vdd_arm: 0.805-1.0V (typ=0.9V) */
446 regulator-name = "buck2";
447 regulator-min-microvolt = <700000>;
448 regulator-max-microvolt = <1300000>;
449 regulator-boot-on;
450 regulator-always-on;
451 regulator-ramp-delay = <1250>;
452 rohm,dvs-run-voltage = <1000000>;
453 rohm,dvs-idle-voltage = <900000>;
456 /* vdd_0p9: 0.805-1.0V (typ=0.9V) */
458 regulator-name = "buck3";
459 regulator-min-microvolt = <700000>;
460 regulator-max-microvolt = <1350000>;
461 regulator-boot-on;
462 regulator-always-on;
467 regulator-name = "buck4";
468 regulator-min-microvolt = <3000000>;
469 regulator-max-microvolt = <3300000>;
470 regulator-boot-on;
471 regulator-always-on;
476 regulator-name = "buck5";
477 regulator-min-microvolt = <1605000>;
478 regulator-max-microvolt = <1995000>;
479 regulator-boot-on;
480 regulator-always-on;
485 regulator-name = "buck6";
486 regulator-min-microvolt = <800000>;
487 regulator-max-microvolt = <1400000>;
488 regulator-boot-on;
489 regulator-always-on;
494 regulator-name = "ldo1";
495 regulator-min-microvolt = <1600000>;
496 regulator-max-microvolt = <1900000>;
497 regulator-boot-on;
498 regulator-always-on;
503 regulator-name = "ldo2";
504 regulator-min-microvolt = <800000>;
505 regulator-max-microvolt = <900000>;
506 regulator-boot-on;
507 regulator-always-on;
512 regulator-name = "ldo3";
513 regulator-min-microvolt = <1800000>;
514 regulator-max-microvolt = <3300000>;
515 regulator-boot-on;
516 regulator-always-on;
520 regulator-name = "ldo4";
521 regulator-min-microvolt = <900000>;
522 regulator-max-microvolt = <1800000>;
523 regulator-boot-on;
524 regulator-always-on;
528 regulator-name = "ldo6";
529 regulator-min-microvolt = <900000>;
530 regulator-max-microvolt = <1800000>;
531 regulator-boot-on;
532 regulator-always-on;
568 clock-frequency = <400000>;
569 pinctrl-names = "default";
570 pinctrl-0 = <&pinctrl_i2c2>;
575 pinctrl-names = "default";
576 pinctrl-0 = <&pinctrl_accel>;
578 st,drdy-int-pin = <1>;
579 interrupt-parent = <&gpio1>;
581 interrupt-names = "INT1";
585 /* off-board header */
587 clock-frequency = <400000>;
588 pinctrl-names = "default";
589 pinctrl-0 = <&pinctrl_i2c3>;
593 /* off-board header */
595 clock-frequency = <400000>;
596 pinctrl-names = "default";
597 pinctrl-0 = <&pinctrl_i2c4>;
602 fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
603 fsl,clkreq-unsupported;
605 clock-names = "ref";
610 pinctrl-names = "default";
611 pinctrl-0 = <&pinctrl_pcie0>;
612 reset-gpio = <&gpio4 5 GPIO_ACTIVE_LOW>;
615 clock-names = "pcie", "pcie_aux", "pcie_bus";
616 assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
618 assigned-clock-rates = <10000000>, <250000000>;
619 assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
625 #address-cells = <1>;
626 #size-cells = <0>;
630 #address-cells = <1>;
631 #size-cells = <0>;
633 local-mac-address = [00 00 00 00 00 00];
638 /* off-board header */
640 pinctrl-names = "default";
641 pinctrl-0 = <&pinctrl_sai3>;
642 assigned-clocks = <&clk IMX8MM_CLK_SAI3>;
643 assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
644 assigned-clock-rates = <24576000>;
650 pinctrl-names = "default";
651 pinctrl-0 = <&pinctrl_uart1>, <&pinctrl_uart1_gpio>;
652 rts-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;
653 cts-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
654 uart-has-rtscts;
660 pinctrl-names = "default";
661 pinctrl-0 = <&pinctrl_uart2>;
667 pinctrl-names = "default";
668 pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>;
669 rts-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
670 cts-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
671 uart-has-rtscts;
675 compatible = "brcm,bcm4330-bt";
676 shutdown-gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
682 pinctrl-names = "default";
683 pinctrl-0 = <&pinctrl_uart4>;
684 rts-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
685 cts-gpios = <&gpio4 1 GPIO_ACTIVE_LOW>;
686 dtr-gpios = <&gpio4 3 GPIO_ACTIVE_LOW>;
687 dsr-gpios = <&gpio4 4 GPIO_ACTIVE_LOW>;
688 dcd-gpios = <&gpio4 6 GPIO_ACTIVE_LOW>;
689 uart-has-rtscts;
695 vbus-supply = <®_usb1_vbus>;
696 disable-over-current;
702 disable-over-current;
708 pinctrl-names = "default";
709 pinctrl-0 = <&pinctrl_usdhc2>;
710 bus-width = <4>;
711 non-removable;
712 vmmc-supply = <®_wifi>;
718 pinctrl-names = "default", "state_100mhz", "state_200mhz";
719 pinctrl-0 = <&pinctrl_usdhc3>;
720 pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
721 pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
722 bus-width = <8>;
723 non-removable;
728 pinctrl-names = "default";
729 pinctrl-0 = <&pinctrl_wdog>;
730 fsl,ext-reset-output;
735 pinctrl-names = "default";
736 pinctrl-0 = <&pinctrl_hog>;
895 MX8MM_IOMUXC_SAI2_TXFS_GPIO4_IO24 0x140 /* CTS */
924 MX8MM_IOMUXC_SD1_CLK_GPIO2_IO0 0x140 /* CTS */
933 MX8MM_IOMUXC_SAI1_RXC_GPIO4_IO1 0x140 /* CTS */
971 pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
987 pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {