Lines Matching +full:phy +full:- +full:imx8 +full:- +full:pcie
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 /dts-v1/;
8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/input/linux-event-codes.h>
10 #include <dt-bindings/leds/common.h>
11 #include <dt-bindings/phy/phy-imx8-pcie.h>
17 compatible = "gw,imx8mm-gw7901", "fsl,imx8mm";
30 stdout-path = &uart2;
38 gpio-keys {
39 compatible = "gpio-keys";
41 key-user-pb {
47 key-user-pb1x {
50 interrupt-parent = <&gsc>;
54 key-erased {
57 interrupt-parent = <&gsc>;
61 key-eeprom-wp {
64 interrupt-parent = <&gsc>;
68 key-tamper {
71 interrupt-parent = <&gsc>;
75 switch-hold {
78 interrupt-parent = <&gsc>;
83 led-controller {
84 compatible = "gpio-leds";
86 led-0 {
91 default-state = "off";
94 led-1 {
99 default-state = "off";
102 led-2 {
107 default-state = "off";
110 led-3 {
115 default-state = "off";
118 led-4 {
123 default-state = "off";
126 led-5 {
131 default-state = "off";
134 led-6 {
139 default-state = "off";
142 led-7 {
147 default-state = "off";
150 led-8 {
155 default-state = "off";
158 led-9 {
163 default-state = "off";
166 led-a {
171 default-state = "off";
174 led-b {
179 default-state = "off";
183 pcie0_refclk: pcie0-refclk {
184 compatible = "fixed-clock";
185 #clock-cells = <0>;
186 clock-frequency = <100000000>;
189 reg_3p3v: regulator-3p3v {
190 compatible = "regulator-fixed";
191 regulator-name = "3P3V";
192 regulator-min-microvolt = <3300000>;
193 regulator-max-microvolt = <3300000>;
196 regulator-ioexp {
197 pinctrl-names = "default";
198 pinctrl-0 = <&pinctrl_reg_ioexp>;
199 compatible = "regulator-fixed";
200 regulator-name = "ioexp";
202 enable-active-high;
203 startup-delay-us = <100>;
204 regulator-min-microvolt = <3300000>;
205 regulator-max-microvolt = <3300000>;
206 regulator-always-on;
209 regulator-isouart {
210 pinctrl-names = "default";
211 pinctrl-0 = <&pinctrl_reg_isouart>;
212 compatible = "regulator-fixed";
213 regulator-name = "iso_uart";
215 startup-delay-us = <100>;
216 regulator-min-microvolt = <3300000>;
217 regulator-max-microvolt = <3300000>;
218 regulator-always-on;
221 reg_usb2_vbus: regulator-usb2 {
222 pinctrl-names = "default";
223 pinctrl-0 = <&pinctrl_reg_usb2>;
224 compatible = "regulator-fixed";
225 regulator-name = "usb_usb2_vbus";
227 enable-active-high;
228 regulator-min-microvolt = <5000000>;
229 regulator-max-microvolt = <5000000>;
232 reg_wifi: regulator-wifi {
233 pinctrl-names = "default";
234 pinctrl-0 = <&pinctrl_reg_wl>;
235 compatible = "regulator-fixed";
236 regulator-name = "wifi";
238 enable-active-high;
239 startup-delay-us = <100>;
240 regulator-min-microvolt = <3300000>;
241 regulator-max-microvolt = <3300000>;
246 operating-points-v2 = <&ddrc_opp_table>;
248 ddrc_opp_table: opp-table {
249 compatible = "operating-points-v2";
251 opp-25M {
252 opp-hz = /bits/ 64 <25000000>;
255 opp-100M {
256 opp-hz = /bits/ 64 <100000000>;
259 opp-750M {
260 opp-hz = /bits/ 64 <750000000>;
270 pinctrl-names = "default";
271 pinctrl-0 = <&pinctrl_spi1>;
272 cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
276 compatible = "jedec,spi-nor";
278 spi-max-frequency = <40000000>;
284 pinctrl-names = "default";
285 pinctrl-0 = <&pinctrl_fec1>;
286 phy-mode = "rgmii-id";
287 local-mac-address = [00 00 00 00 00 00];
290 fixed-link {
292 full-duplex;
297 gpio-line-names = "uart1_rs422#", "", "", "uart1_rs485#",
305 gpio-line-names = "", "", "", "",
313 gpio-line-names = "", "", "", "dig2_out", "dig2_in", "sim2sel", "", "",
328 clock-frequency = <100000>;
329 pinctrl-names = "default";
330 pinctrl-0 = <&pinctrl_i2c1>;
336 pinctrl-0 = <&pinctrl_gsc>;
337 interrupt-parent = <&gpio4>;
339 interrupt-controller;
340 #interrupt-cells = <1>;
343 compatible = "gw,gsc-adc";
344 #address-cells = <1>;
345 #size-cells = <0>;
363 gw,voltage-divider-ohms = <22100 1000>;
370 gw,voltage-divider-ohms = <22100 1000>;
377 gw,voltage-divider-ohms = <22100 1000>;
384 gw,voltage-divider-ohms = <10000 10000>;
391 gw,voltage-divider-ohms = <10000 10000>;
434 gw,voltage-divider-ohms = <10000 10000>;
442 gpio-controller;
443 #gpio-cells = <2>;
444 interrupt-parent = <&gsc>;
479 clock-frequency = <400000>;
480 pinctrl-names = "default";
481 pinctrl-0 = <&pinctrl_i2c2>;
487 pinctrl-names = "default";
488 pinctrl-0 = <&pinctrl_pmic>;
489 interrupt-parent = <&gpio3>;
491 rohm,reset-snvs-powered;
492 #clock-cells = <0>;
494 clock-output-names = "clk-32k-out";
497 /* vdd_soc: 0.805-0.900V (typ=0.8V) */
499 regulator-name = "buck1";
500 regulator-min-microvolt = <700000>;
501 regulator-max-microvolt = <1300000>;
502 regulator-boot-on;
503 regulator-always-on;
504 regulator-ramp-delay = <1250>;
507 /* vdd_arm: 0.805-1.0V (typ=0.9V) */
509 regulator-name = "buck2";
510 regulator-min-microvolt = <700000>;
511 regulator-max-microvolt = <1300000>;
512 regulator-boot-on;
513 regulator-always-on;
514 regulator-ramp-delay = <1250>;
515 rohm,dvs-run-voltage = <1000000>;
516 rohm,dvs-idle-voltage = <900000>;
519 /* vdd_0p9: 0.805-1.0V (typ=0.9V) */
521 regulator-name = "buck3";
522 regulator-min-microvolt = <700000>;
523 regulator-max-microvolt = <1350000>;
524 regulator-boot-on;
525 regulator-always-on;
530 regulator-name = "buck4";
531 regulator-min-microvolt = <3000000>;
532 regulator-max-microvolt = <3300000>;
533 regulator-boot-on;
534 regulator-always-on;
539 regulator-name = "buck5";
540 regulator-min-microvolt = <1605000>;
541 regulator-max-microvolt = <1995000>;
542 regulator-boot-on;
543 regulator-always-on;
548 regulator-name = "buck6";
549 regulator-min-microvolt = <800000>;
550 regulator-max-microvolt = <1400000>;
551 regulator-boot-on;
552 regulator-always-on;
557 regulator-name = "ldo1";
558 regulator-min-microvolt = <1600000>;
559 regulator-max-microvolt = <1900000>;
560 regulator-boot-on;
561 regulator-always-on;
566 regulator-name = "ldo2";
567 regulator-min-microvolt = <800000>;
568 regulator-max-microvolt = <900000>;
569 regulator-boot-on;
570 regulator-always-on;
575 regulator-name = "ldo3";
576 regulator-min-microvolt = <1800000>;
577 regulator-max-microvolt = <3300000>;
578 regulator-boot-on;
579 regulator-always-on;
583 regulator-name = "ldo4";
584 regulator-min-microvolt = <900000>;
585 regulator-max-microvolt = <1800000>;
586 regulator-boot-on;
587 regulator-always-on;
591 regulator-name = "ldo6";
592 regulator-min-microvolt = <900000>;
593 regulator-max-microvolt = <1800000>;
594 regulator-boot-on;
595 regulator-always-on;
602 clock-frequency = <400000>;
603 pinctrl-names = "default";
604 pinctrl-0 = <&pinctrl_i2c3>;
610 gpio-controller;
611 #gpio-cells = <2>;
617 pinctrl-0 = <&pinctrl_ksz>;
618 interrupt-parent = <&gpio4>;
620 phy-mode = "rgmii-id";
623 #address-cells = <1>;
624 #size-cells = <0>;
629 phy-mode = "internal";
630 local-mac-address = [00 00 00 00 00 00];
636 phy-mode = "internal";
637 local-mac-address = [00 00 00 00 00 00];
643 phy-mode = "internal";
644 local-mac-address = [00 00 00 00 00 00];
650 phy-mode = "internal";
651 local-mac-address = [00 00 00 00 00 00];
658 phy-mode = "rgmii-id";
660 fixed-link {
662 full-duplex;
675 clock-frequency = <400000>;
676 pinctrl-names = "default";
677 pinctrl-0 = <&pinctrl_i2c4>;
682 fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
683 fsl,clkreq-unsupported;
685 clock-names = "ref";
690 pinctrl-names = "default";
691 pinctrl-0 = <&pinctrl_pcie0>;
692 reset-gpio = <&gpio5 2 GPIO_ACTIVE_LOW>;
695 clock-names = "pcie", "pcie_aux", "pcie_bus";
696 assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
698 assigned-clock-rates = <10000000>, <250000000>;
699 assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
717 pinctrl-names = "default";
718 pinctrl-0 = <&pinctrl_uart1>, <&pinctrl_uart1_gpio>;
719 rts-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
720 cts-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
721 dtr-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
722 dsr-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
723 dcd-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
724 uart-has-rtscts;
730 pinctrl-names = "default";
731 pinctrl-0 = <&pinctrl_uart2>;
736 pinctrl-names = "default";
737 pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>;
738 cts-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;
739 rts-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;
740 uart-has-rtscts;
745 pinctrl-names = "default";
746 pinctrl-0 = <&pinctrl_uart4>, <&pinctrl_uart4_gpio>;
747 cts-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
748 rts-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
749 uart-has-rtscts;
755 disable-over-current;
761 vbus-supply = <®_usb2_vbus>;
767 pinctrl-names = "default";
768 pinctrl-0 = <&pinctrl_usdhc1>;
769 bus-width = <4>;
770 non-removable;
771 vmmc-supply = <®_wifi>;
777 pinctrl-names = "default", "state_100mhz", "state_200mhz";
778 pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
779 pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
780 pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
781 cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
782 bus-width = <4>;
783 vmmc-supply = <®_3p3v>;
789 pinctrl-names = "default", "state_100mhz", "state_200mhz";
790 pinctrl-0 = <&pinctrl_usdhc3>;
791 pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
792 pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
793 bus-width = <8>;
794 non-removable;
799 pinctrl-names = "default";
800 pinctrl-0 = <&pinctrl_wdog>;
801 fsl,ext-reset-output;
806 pinctrl-names = "default";
807 pinctrl-0 = <&pinctrl_hog>;
1015 pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
1026 pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
1037 pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
1060 pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
1076 pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {