Lines Matching +full:imx8mm +full:- +full:iomuxc

1 // SPDX-License-Identifier: GPL-2.0+ OR MIT
3  * Copyright 2021-2022 Marek Vasut <marex@denx.de>
6 /dts-v1/;
8 #include "imx8mm-verdin.dtsi"
13 		     "toradex,verdin-imx8mm",
14 		     "fsl,imx8mm";
16 	/delete-node/ gpio-keys;
19 		compatible = "gpio-leds";
20 		pinctrl-names = "default";
21 		pinctrl-0 = <&pinctrl_led>;
23 		led-1 {
26 			linux,default-trigger = "mmc0";
29 		led-2 {
32 			linux,default-trigger = "heartbeat";
37 		compatible = "gpio-beeper";
38 		pinctrl-names = "default";
39 		pinctrl-0 = <&pinctrl_beeper>;
44 	clk_xtal20: clk-xtal20 {
45 		compatible = "fixed-clock";
46 		#clock-cells = <0>;
47 		clock-frequency = <20000000>;
52 	#address-cells = <1>;
53 	#size-cells = <0>;
54 	pinctrl-names = "default";
55 	pinctrl-0 = <&pinctrl_ecspi1>;
56 	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
63 		interrupt-parent = <&gpio1>;
66 		spi-max-frequency = <2000000>;
72 	pinctrl-0 = <&pinctrl_ecspi2 &pinctrl_gpio1>;
73 	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>, <&gpio3 4 GPIO_ACTIVE_LOW>;
79 		spi-max-frequency = <25000000>;
85 		spi-max-frequency = <25000000>;
91 	max-speed = <100>;
103 		#address-cells = <1>;
104 		#size-cells = <1>;
105 		compatible = "jedec,spi-nor";
106 		spi-max-frequency = <66000000>;
107 		spi-rx-bus-width = <4>;
108 		spi-tx-bus-width = <4>;
113 	gpio-line-names =
125 	gpio-line-names =
137 	gpio-line-names =
154 	gpio-line-names =
166 	gpio-line-names =
191 	/delete-node/ bridge@2c;
192 	/delete-node/ hdmi@48;
193 	/delete-node/ touch@4a;
194 	/delete-node/ sensor@4f;
195 	/delete-node/ eeprom@50;
196 	/delete-node/ eeprom@57;
199 &iomuxc {
200 	pinctrl-0 = <&pinctrl_gpio7>, <&pinctrl_gpio_hog1>,
293 	/delete-property/ enable-active-high;
298 	/delete-property/ enable-active-high;
307 	uart-has-rtscts;
316 	pinctrl-0 = <&pinctrl_uart4 &pinctrl_uart4_rts>;
317 	linux,rs485-enabled-at-boot-time;
318 	rts-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;