Lines Matching +full:vddio +full:- +full:regulator
1 // SPDX-License-Identifier: GPL-2.0+
6 /dts-v1/;
12 compatible = "fsl,imx8dxl-evk", "fsl,imx8dxl";
22 stdout-path = &lpuart0;
30 reserved-memory {
31 #address-cells = <2>;
32 #size-cells = <2>;
37 * This will be automatically added to dtb if OP-TEE is installed.
40 * no-map;
46 compatible = "shared-dma-pool";
49 alloc-ranges = <0 0x98000000 0 0x14000000>;
50 linux,cma-default;
54 mux3_en: regulator-0 {
55 compatible = "regulator-fixed";
56 regulator-min-microvolt = <3300000>;
57 regulator-max-microvolt = <3300000>;
58 regulator-name = "mux3_en";
60 regulator-always-on;
63 reg_fec1_sel: regulator-1 {
64 compatible = "regulator-fixed";
65 regulator-name = "fec1_supply";
66 regulator-min-microvolt = <3300000>;
67 regulator-max-microvolt = <3300000>;
69 regulator-always-on;
73 reg_fec1_io: regulator-2 {
74 compatible = "regulator-fixed";
75 regulator-name = "fec1_io_supply";
76 regulator-min-microvolt = <1800000>;
77 regulator-max-microvolt = <1800000>;
79 enable-active-high;
80 regulator-always-on;
84 reg_usdhc2_vmmc: regulator-3 {
85 compatible = "regulator-fixed";
86 regulator-name = "SD1_SPWR";
87 regulator-min-microvolt = <3000000>;
88 regulator-max-microvolt = <3000000>;
90 enable-active-high;
91 off-on-delay-us = <3480>;
96 pinctrl-names = "default";
97 pinctrl-0 = <&pinctrl_eqos>;
98 phy-mode = "rgmii-id";
99 phy-handle = <ðphy0>;
100 nvmem-cells = <&fec_mac1>;
101 nvmem-cell-names = "mac-address";
102 snps,reset-gpios = <&pca6416_1 2 GPIO_ACTIVE_LOW>;
103 snps,reset-delays-us = <10 20 200000>;
107 compatible = "snps,dwmac-mdio";
108 #address-cells = <1>;
109 #size-cells = <0>;
111 ethphy0: ethernet-phy@0 {
112 compatible = "ethernet-phy-ieee802.3-c22";
114 eee-broken-1000t;
115 qca,disable-smarteee;
116 vddio-supply = <&vddio0>;
118 vddio0: vddio-regulator {
119 regulator-min-microvolt = <1800000>;
120 regulator-max-microvolt = <1800000>;
132 pinctrl-names = "default";
133 pinctrl-0 = <&pinctrl_fec1>;
134 phy-mode = "rgmii-txid";
135 phy-handle = <ðphy1>;
136 fsl,magic-packet;
137 rx-internal-delay-ps = <2000>;
138 nvmem-cells = <&fec_mac0>;
139 nvmem-cell-names = "mac-address";
143 #address-cells = <1>;
144 #size-cells = <0>;
146 ethphy1: ethernet-phy@1 {
147 compatible = "ethernet-phy-ieee802.3-c22";
149 reset-gpios = <&pca6416_1 0 GPIO_ACTIVE_LOW>;
150 reset-assert-us = <10000>;
151 qca,disable-smarteee;
152 vddio-supply = <&vddio1>;
154 vddio1: vddio-regulator {
155 regulator-min-microvolt = <1800000>;
156 regulator-max-microvolt = <1800000>;
163 #address-cells = <1>;
164 #size-cells = <0>;
165 clock-frequency = <100000>;
166 pinctrl-names = "default";
167 pinctrl-0 = <&pinctrl_i2c2>;
173 gpio-controller;
174 #gpio-cells = <2>;
180 gpio-controller;
181 #gpio-cells = <2>;
184 pca9548_1: i2c-mux@70 {
186 #address-cells = <1>;
187 #size-cells = <0>;
191 #address-cells = <1>;
192 #size-cells = <0>;
198 gpio-controller;
199 #gpio-cells = <2>;
205 #address-cells = <1>;
206 #size-cells = <0>;
211 #address-cells = <1>;
212 #size-cells = <0>;
217 #address-cells = <1>;
218 #size-cells = <0>;
225 pinctrl-names = "default";
226 pinctrl-0 = <&pinctrl_lpuart0>;
239 pmic-thermal0 {
240 polling-delay-passive = <250>;
241 polling-delay = <2000>;
242 thermal-sensors = <&tsens IMX_SC_R_PMIC_0>;
258 cooling-maps {
261 cooling-device =
270 pinctrl-names = "default";
271 pinctrl-0 = <&pinctrl_usdhc1>;
272 bus-width = <8>;
273 no-sd;
274 no-sdio;
275 non-removable;
280 pinctrl-names = "default";
281 pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
282 bus-width = <4>;
283 vmmc-supply = <®_usdhc2_vmmc>;
284 cd-gpios = <&lsio_gpio5 1 GPIO_ACTIVE_LOW>;
285 wp-gpios = <&lsio_gpio5 0 GPIO_ACTIVE_HIGH>;
290 pinctrl-names = "default";
291 pinctrl-0 = <&pinctrl_hog>;