Lines Matching +full:hdmi +full:- +full:supply
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 #include "meson-sm1.dtsi"
7 #include <dt-bindings/gpio/meson-g12a-gpio.h>
8 #include <dt-bindings/leds/common.h>
9 #include <dt-bindings/sound/meson-g12a-tohdmitx.h>
18 stdout-path = "serial0:115200n8";
26 emmc_pwrseq: emmc-pwrseq {
27 compatible = "mmc-pwrseq-emmc";
28 reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
31 tflash_vdd: regulator-tflash_vdd {
32 compatible = "regulator-fixed";
34 regulator-name = "TFLASH_VDD";
35 regulator-min-microvolt = <3300000>;
36 regulator-max-microvolt = <3300000>;
39 enable-active-high;
40 regulator-always-on;
43 tf_io: gpio-regulator-tf_io {
44 compatible = "regulator-gpio";
46 regulator-name = "TF_IO";
47 regulator-min-microvolt = <1800000>;
48 regulator-max-microvolt = <3300000>;
49 vin-supply = <&vcc_5v>;
51 enable-gpio = <&gpio_ao GPIOE_2 GPIO_OPEN_DRAIN>;
52 enable-active-high;
53 regulator-always-on;
56 gpios-states = <0>;
62 flash_1v8: regulator-flash_1v8 {
63 compatible = "regulator-fixed";
64 regulator-name = "FLASH_1V8";
65 regulator-min-microvolt = <1800000>;
66 regulator-max-microvolt = <1800000>;
67 vin-supply = <&vcc_3v3>;
68 regulator-always-on;
71 main_12v: regulator-main_12v {
72 compatible = "regulator-fixed";
73 regulator-name = "12V";
74 regulator-min-microvolt = <12000000>;
75 regulator-max-microvolt = <12000000>;
76 regulator-always-on;
79 vcc_5v: regulator-vcc_5v {
80 compatible = "regulator-fixed";
81 regulator-name = "5V";
82 regulator-min-microvolt = <5000000>;
83 regulator-max-microvolt = <5000000>;
84 regulator-always-on;
85 vin-supply = <&main_12v>;
87 enable-active-high;
90 vcc_1v8: regulator-vcc_1v8 {
91 compatible = "regulator-fixed";
92 regulator-name = "VCC_1V8";
93 regulator-min-microvolt = <1800000>;
94 regulator-max-microvolt = <1800000>;
95 vin-supply = <&vcc_3v3>;
96 regulator-always-on;
99 vcc_3v3: regulator-vcc_3v3 {
100 compatible = "regulator-fixed";
101 regulator-name = "VCC_3V3";
102 regulator-min-microvolt = <3300000>;
103 regulator-max-microvolt = <3300000>;
104 vin-supply = <&vddao_3v3>;
105 regulator-always-on;
109 vddcpu: regulator-vddcpu {
113 compatible = "pwm-regulator";
115 regulator-name = "VDDCPU";
116 regulator-min-microvolt = <721000>;
117 regulator-max-microvolt = <1022000>;
119 pwm-supply = <&main_12v>;
122 pwm-dutycycle-range = <100 0>;
124 regulator-boot-on;
125 regulator-always-on;
128 usb_pwr_en: regulator-usb_pwr_en {
129 compatible = "regulator-fixed";
130 regulator-name = "USB_PWR_EN";
131 regulator-min-microvolt = <5000000>;
132 regulator-max-microvolt = <5000000>;
133 vin-supply = <&vcc_5v>;
137 enable-active-high;
140 vddao_1v8: regulator-vddao_1v8 {
141 compatible = "regulator-fixed";
142 regulator-name = "VDDAO_1V8";
143 regulator-min-microvolt = <1800000>;
144 regulator-max-microvolt = <1800000>;
145 vin-supply = <&vddao_3v3>;
146 regulator-always-on;
149 vddao_3v3: regulator-vddao_3v3 {
150 compatible = "regulator-fixed";
151 regulator-name = "VDDAO_3V3";
152 regulator-min-microvolt = <3300000>;
153 regulator-max-microvolt = <3300000>;
154 vin-supply = <&main_12v>;
155 regulator-always-on;
158 hdmi-connector {
159 compatible = "hdmi-connector";
164 remote-endpoint = <&hdmi_tx_tmds_out>;
170 compatible = "amlogic,axg-sound-card";
171 audio-aux-devs = <&tdmout_b>;
172 audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
177 assigned-clocks = <&clkc CLKID_MPLL2>,
180 assigned-clock-parents = <0>, <0>, <0>;
181 assigned-clock-rates = <294912000>,
186 dai-link-0 {
187 sound-dai = <&frddr_a>;
190 dai-link-1 {
191 sound-dai = <&frddr_b>;
194 dai-link-2 {
195 sound-dai = <&frddr_c>;
198 /* 8ch hdmi interface */
199 dai-link-3 {
200 sound-dai = <&tdmif_b>;
201 dai-format = "i2s";
202 dai-tdm-slot-tx-mask-0 = <1 1>;
203 dai-tdm-slot-tx-mask-1 = <1 1>;
204 dai-tdm-slot-tx-mask-2 = <1 1>;
205 dai-tdm-slot-tx-mask-3 = <1 1>;
206 mclk-fs = <256>;
209 sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
213 /* hdmi glue */
214 dai-link-4 {
215 sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
218 sound-dai = <&hdmi_tx>;
229 pinctrl-0 = <&cec_ao_a_h_pins>;
230 pinctrl-names = "default";
232 hdmi-phandle = <&hdmi_tx>;
236 pinctrl-0 = <&cec_ao_b_h_pins>;
237 pinctrl-names = "default";
239 hdmi-phandle = <&hdmi_tx>;
247 cpu-supply = <&vddcpu>;
248 operating-points-v2 = <&cpu_opp_table>;
250 clock-latency = <50000>;
254 cpu-supply = <&vddcpu>;
255 operating-points-v2 = <&cpu_opp_table>;
257 clock-latency = <50000>;
261 cpu-supply = <&vddcpu>;
262 operating-points-v2 = <&cpu_opp_table>;
264 clock-latency = <50000>;
268 cpu-supply = <&vddcpu>;
269 operating-points-v2 = <&cpu_opp_table>;
271 clock-latency = <50000>;
275 external_phy: ethernet-phy@0 {
278 max-speed = <1000>;
280 reset-assert-us = <10000>;
281 reset-deassert-us = <80000>;
282 reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
284 interrupt-parent = <&gpio_intc>;
291 pinctrl-0 = <ð_pins>, <ð_rgmii_pins>;
292 pinctrl-names = "default";
294 phy-mode = "rgmii";
295 phy-handle = <&external_phy>;
296 amlogic,tx-delay-ns = <2>;
312 gpio-line-names =
356 gpio-line-names =
372 pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
373 pinctrl-names = "default";
374 hdmi-supply = <&vcc_5v>;
379 remote-endpoint = <&hdmi_connector_in>;
385 pinctrl-0 = <&remote_input_ao_pins>;
386 pinctrl-names = "default";
390 pinctrl-0 = <&pwm_ao_d_e_pins>;
391 pinctrl-names = "default";
393 clock-names = "clkin1";
404 pinctrl-0 = <&sdcard_c_pins>;
405 pinctrl-1 = <&sdcard_clk_gate_c_pins>;
406 pinctrl-names = "default", "clk-gate";
408 bus-width = <4>;
409 cap-sd-highspeed;
410 max-frequency = <200000000>;
411 sd-uhs-sdr12;
412 sd-uhs-sdr25;
413 sd-uhs-sdr50;
414 sd-uhs-sdr104;
415 disable-wp;
417 cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
418 vmmc-supply = <&tflash_vdd>;
419 vqmmc-supply = <&tf_io>;
425 pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
426 pinctrl-1 = <&emmc_clk_gate_pins>;
427 pinctrl-names = "default", "clk-gate";
429 bus-width = <8>;
430 cap-mmc-highspeed;
431 mmc-ddr-1_8v;
432 mmc-hs200-1_8v;
433 max-frequency = <200000000>;
434 disable-wp;
436 mmc-pwrseq = <&emmc_pwrseq>;
437 vmmc-supply = <&vcc_3v3>;
438 vqmmc-supply = <&flash_1v8>;
455 pinctrl-0 = <&uart_ao_a_pins>;
456 pinctrl-names = "default";
461 vbus-supply = <&usb_pwr_en>;
465 phy-supply = <&vcc_5v>;