Lines Matching +full:aux +full:- +full:gpios

1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
7 /dts-v1/;
9 #include "meson-sm1-ac2xx.dtsi"
10 #include <dt-bindings/sound/meson-g12a-tohdmitx.h>
13 	compatible = "haochuangyi,h96-max", "amlogic,sm1";
17 		compatible = "amlogic,axg-sound-card";
18 		model = "H96-MAX";
19 		audio-aux-devs = <&tdmout_b>;
20 		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
25 		assigned-clocks = <&clkc CLKID_MPLL2>,
28 		assigned-clock-parents = <0>, <0>, <0>;
29 		assigned-clock-rates = <294912000>,
34 		dai-link-0 {
35 			sound-dai = <&frddr_a>;
38 		dai-link-1 {
39 			sound-dai = <&frddr_b>;
42 		dai-link-2 {
43 			sound-dai = <&frddr_c>;
47 		dai-link-3 {
48 			sound-dai = <&tdmif_b>;
49 			dai-format = "i2s";
50 			dai-tdm-slot-tx-mask-0 = <1 1>;
51 			dai-tdm-slot-tx-mask-1 = <1 1>;
52 			dai-tdm-slot-tx-mask-2 = <1 1>;
53 			dai-tdm-slot-tx-mask-3 = <1 1>;
54 			mclk-fs = <256>;
57 				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
62 		dai-link-4 {
63 			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
66 				sound-dai = <&hdmi_tx>;
83 	pinctrl-0 = <&eth_pins>, <&eth_rgmii_pins>;
84 	pinctrl-names = "default";
85 	phy-mode = "rgmii-txid";
86 	phy-handle = <&external_phy>;
88 	rx-internal-delay-ps = <800>;
92 	external_phy: ethernet-phy@0 {
95 		max-speed = <1000>;
97 		reset-assert-us = <10000>;
98 		reset-deassert-us = <80000>;
99 		reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
101 		interrupt-parent = <&gpio_intc>;
134 	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
135 	pinctrl-names = "default";
136 	uart-has-rtscts;
139 		compatible = "brcm,bcm43438-bt";
140 		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
141 		max-speed = <2000000>;
143 		clock-names = "lpo";