Lines Matching +full:gpio +full:- +full:gate +full:- +full:clock
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 #include "meson-gxbb.dtsi"
7 #include <dt-bindings/sound/meson-aiu.h>
10 compatible = "tronsmart,vega-s95", "amlogic,meson-gxbb";
18 stdout-path = "serial0:115200n8";
21 spdif_dit: audio-codec-0 {
22 #sound-dai-cells = <0>;
23 compatible = "linux,spdif-dit";
25 sound-name-prefix = "DIT";
29 compatible = "gpio-leds";
31 led-blue {
32 label = "vega-s95:blue:on";
34 default-state = "on";
35 panic-indicator;
39 usb_pwr: regulator-usb-pwrs {
40 compatible = "regulator-fixed";
42 regulator-name = "USB_PWR";
44 regulator-min-microvolt = <5000000>;
45 regulator-max-microvolt = <5000000>;
47 gpio = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
48 enable-active-high;
51 vddio_boot: regulator-vddio_boot {
52 compatible = "regulator-fixed";
53 regulator-name = "VDDIO_BOOT";
54 regulator-min-microvolt = <1800000>;
55 regulator-max-microvolt = <1800000>;
58 vddao_3v3: regulator-vddao_3v3 {
59 compatible = "regulator-fixed";
60 regulator-name = "VDDAO_3V3";
61 regulator-min-microvolt = <3300000>;
62 regulator-max-microvolt = <3300000>;
65 vddio_ao18: regulator-vddio_ao18 {
66 compatible = "regulator-fixed";
67 regulator-name = "VDDIO_AO18";
68 regulator-min-microvolt = <1800000>;
69 regulator-max-microvolt = <1800000>;
72 vcc_3v3: regulator-vcc_3v3 {
73 compatible = "regulator-fixed";
74 regulator-name = "VCC_3V3";
75 regulator-min-microvolt = <3300000>;
76 regulator-max-microvolt = <3300000>;
79 emmc_pwrseq: emmc-pwrseq {
80 compatible = "mmc-pwrseq-emmc";
81 reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
85 compatible = "pwm-clock";
86 #clock-cells = <0>;
87 clock-frequency = <32768>;
91 hdmi-connector {
92 compatible = "hdmi-connector";
97 remote-endpoint = <&hdmi_tx_tmds_out>;
102 sdio_pwrseq: sdio-pwrseq {
103 compatible = "mmc-pwrseq-simple";
104 reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
106 clock-names = "ext_clock";
110 compatible = "amlogic,gx-sound-card";
111 model = "VEGA-S95";
112 assigned-clocks = <&clkc CLKID_MPLL0>,
115 assigned-clock-parents = <0>, <0>, <0>;
116 assigned-clock-rates = <294912000>,
121 dai-link-0 {
122 sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
125 dai-link-1 {
126 sound-dai = <&aiu AIU_CPU CPU_SPDIF_FIFO>;
129 dai-link-2 {
130 sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
131 dai-format = "i2s";
132 mclk-fs = <256>;
134 codec-0 {
135 sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
139 dai-link-3 {
140 sound-dai = <&aiu AIU_CPU CPU_SPDIF_ENCODER>;
142 codec-0 {
143 sound-dai = <&spdif_dit>;
147 dai-link-4 {
148 sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
150 codec-0 {
151 sound-dai = <&hdmi_tx>;
159 pinctrl-0 = <&spdif_out_y_pins>;
160 pinctrl-names = "default";
165 pinctrl-0 = <&ao_cec_pins>;
166 pinctrl-names = "default";
167 hdmi-phandle = <&hdmi_tx>;
172 pinctrl-0 = <ð_rgmii_pins>;
173 pinctrl-names = "default";
175 phy-handle = <ð_phy0>;
176 phy-mode = "rgmii";
178 amlogic,tx-delay-ns = <2>;
181 compatible = "snps,dwmac-mdio";
182 #address-cells = <1>;
183 #size-cells = <0>;
185 eth_phy0: ethernet-phy@0 {
189 reset-assert-us = <10000>;
190 reset-deassert-us = <80000>;
191 reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
193 interrupt-parent = <&gpio_intc>;
202 pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
203 pinctrl-names = "default";
208 remote-endpoint = <&hdmi_connector_in>;
214 pinctrl-0 = <&remote_input_ao_pins>;
215 pinctrl-names = "default";
216 linux,rc-map-name = "rc-vega-s9x";
221 pinctrl-0 = <&pwm_e_pins>;
222 pinctrl-names = "default";
224 clock-names = "clkin0";
229 vref-supply = <&vddio_ao18>;
235 pinctrl-0 = <&sdio_pins>;
236 pinctrl-1 = <&sdio_clk_gate_pins>;
237 pinctrl-names = "default", "clk-gate";
238 #address-cells = <1>;
239 #size-cells = <0>;
241 bus-width = <4>;
242 cap-sd-highspeed;
243 max-frequency = <50000000>;
245 non-removable;
246 disable-wp;
249 keep-power-in-suspend;
251 mmc-pwrseq = <&sdio_pwrseq>;
253 vmmc-supply = <&vddao_3v3>;
254 vqmmc-supply = <&vddio_boot>;
258 compatible = "brcm,bcm4329-fmac";
265 pinctrl-0 = <&sdcard_pins>;
266 pinctrl-1 = <&sdcard_clk_gate_pins>;
267 pinctrl-names = "default", "clk-gate";
269 bus-width = <4>;
270 cap-sd-highspeed;
271 max-frequency = <50000000>;
272 disable-wp;
274 cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
276 vmmc-supply = <&vddao_3v3>;
277 vqmmc-supply = <&vcc_3v3>;
283 pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
284 pinctrl-1 = <&emmc_clk_gate_pins>;
285 pinctrl-names = "default", "clk-gate";
287 bus-width = <8>;
288 cap-mmc-highspeed;
289 max-frequency = <200000000>;
290 non-removable;
291 disable-wp;
292 mmc-ddr-1_8v;
293 mmc-hs200-1_8v;
295 mmc-pwrseq = <&emmc_pwrseq>;
296 vmmc-supply = <&vcc_3v3>;
297 vqmmc-supply = <&vddio_boot>;
303 pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
304 pinctrl-names = "default";
307 compatible = "brcm,bcm43438-bt";
308 shutdown-gpios = <&gpio GPIOX_20 GPIO_ACTIVE_HIGH>;
309 max-speed = <2000000>;
311 clock-names = "lpo";
318 pinctrl-0 = <&uart_ao_a_pins>;
319 pinctrl-names = "default";
324 phy-supply = <&usb_pwr>;