Lines Matching +full:reg +full:- +full:mux
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 #include <dt-bindings/clock/axg-aoclkc.h>
7 #include <dt-bindings/clock/axg-audio-clkc.h>
8 #include <dt-bindings/clock/axg-clkc.h>
9 #include <dt-bindings/gpio/gpio.h>
10 #include <dt-bindings/gpio/meson-axg-gpio.h>
11 #include <dt-bindings/interrupt-controller/irq.h>
12 #include <dt-bindings/interrupt-controller/arm-gic.h>
13 #include <dt-bindings/reset/amlogic,meson-axg-audio-arb.h>
14 #include <dt-bindings/reset/amlogic,meson-axg-reset.h>
15 #include <dt-bindings/power/meson-axg-power.h>
18 compatible = "amlogic,meson-axg";
20 interrupt-parent = <&gic>;
21 #address-cells = <2>;
22 #size-cells = <2>;
24 tdmif_a: audio-controller-0 {
25 compatible = "amlogic,axg-tdm-iface";
26 #sound-dai-cells = <0>;
27 sound-name-prefix = "TDM_A";
31 clock-names = "mclk", "sclk", "lrclk";
35 tdmif_b: audio-controller-1 {
36 compatible = "amlogic,axg-tdm-iface";
37 #sound-dai-cells = <0>;
38 sound-name-prefix = "TDM_B";
42 clock-names = "mclk", "sclk", "lrclk";
46 tdmif_c: audio-controller-2 {
47 compatible = "amlogic,axg-tdm-iface";
48 #sound-dai-cells = <0>;
49 sound-name-prefix = "TDM_C";
53 clock-names = "mclk", "sclk", "lrclk";
57 arm-pmu {
58 compatible = "arm,cortex-a53-pmu";
63 interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
67 #address-cells = <0x2>;
68 #size-cells = <0x0>;
72 compatible = "arm,cortex-a53";
73 reg = <0x0 0x0>;
74 enable-method = "psci";
75 next-level-cache = <&l2>;
81 compatible = "arm,cortex-a53";
82 reg = <0x0 0x1>;
83 enable-method = "psci";
84 next-level-cache = <&l2>;
90 compatible = "arm,cortex-a53";
91 reg = <0x0 0x2>;
92 enable-method = "psci";
93 next-level-cache = <&l2>;
99 compatible = "arm,cortex-a53";
100 reg = <0x0 0x3>;
101 enable-method = "psci";
102 next-level-cache = <&l2>;
106 l2: l2-cache0 {
111 sm: secure-monitor {
112 compatible = "amlogic,meson-gxbb-sm";
116 compatible = "amlogic,meson-gxbb-efuse";
118 #address-cells = <1>;
119 #size-cells = <1>;
120 read-only;
121 secure-monitor = <&sm>;
125 compatible = "arm,psci-1.0";
129 reserved-memory {
130 #address-cells = <2>;
131 #size-cells = <2>;
136 reg = <0x0 0x0 0x0 0x1000000>;
137 no-map;
142 reg = <0x0 0x05000000 0x0 0x300000>;
143 no-map;
148 compatible = "arm,scpi-pre-1.0";
153 compatible = "arm,scpi-clocks";
155 scpi_dvfs: clock-controller {
156 compatible = "arm,scpi-dvfs-clocks";
157 #clock-cells = <1>;
158 clock-indices = <0>;
159 clock-output-names = "vcpu";
164 compatible = "amlogic,meson-gxbb-scpi-sensors";
165 #thermal-sensor-cells = <1>;
170 compatible = "simple-bus";
171 #address-cells = <2>;
172 #size-cells = <2>;
176 compatible = "amlogic,axg-pcie", "snps,dw-pcie";
177 reg = <0x0 0xf9800000 0x0 0x400000>,
180 reg-names = "elbi", "cfg", "config";
182 #interrupt-cells = <1>;
183 interrupt-map-mask = <0 0 0 0>;
184 interrupt-map = <0 0 0 0 &gic GIC_SPI 179 IRQ_TYPE_EDGE_RISING>;
185 bus-range = <0x0 0xff>;
186 #address-cells = <3>;
187 #size-cells = <2>;
192 clock-names = "general", "pclk", "port";
194 reset-names = "port", "apb";
195 num-lanes = <1>;
197 phy-names = "pcie";
202 compatible = "amlogic,axg-pcie", "snps,dw-pcie";
203 reg = <0x0 0xfa000000 0x0 0x400000>,
206 reg-names = "elbi", "cfg", "config";
208 #interrupt-cells = <1>;
209 interrupt-map-mask = <0 0 0 0>;
210 interrupt-map = <0 0 0 0 &gic GIC_SPI 169 IRQ_TYPE_EDGE_RISING>;
211 bus-range = <0x0 0xff>;
212 #address-cells = <3>;
213 #size-cells = <2>;
218 clock-names = "general", "pclk", "port";
220 reset-names = "port", "apb";
221 num-lanes = <1>;
223 phy-names = "pcie";
228 compatible = "amlogic,meson-axg-usb-ctrl";
229 reg = <0x0 0xffe09080 0x0 0x20>;
231 #address-cells = <2>;
232 #size-cells = <2>;
236 clock-names = "usb_ctrl", "ddr";
242 phy-names = "usb2-phy1";
245 compatible = "amlogic,meson-g12a-usb", "snps,dwc2";
246 reg = <0x0 0xff400000 0x0 0x40000>;
249 clock-names = "otg";
252 g-rx-fifo-size = <192>;
253 g-np-tx-fifo-size = <128>;
254 g-tx-fifo-size = <128 128 16 16 16>;
259 reg = <0x0 0xff500000 0x0 0x100000>;
262 maximum-speed = "high-speed";
268 compatible = "amlogic,meson-axg-dwmac",
269 "snps,dwmac-3.70a",
271 reg = <0x0 0xff3f0000 0x0 0x10000>,
274 interrupt-names = "macirq";
279 clock-names = "stmmaceth", "clkin0", "clkin1",
280 "timing-adjustment";
281 rx-fifo-depth = <4096>;
282 tx-fifo-depth = <2048>;
283 power-domains = <&pwrc PWRC_AXG_ETHERNET_MEM_ID>;
288 compatible = "amlogic,axg-pcie-phy";
289 reg = <0x0 0xff644000 0x0 0x1c>;
292 phy-names = "analog";
293 #phy-cells = <0>;
296 pdm: audio-controller@ff632000 {
297 compatible = "amlogic,axg-pdm";
298 reg = <0x0 0xff632000 0x0 0x34>;
299 #sound-dai-cells = <0>;
300 sound-name-prefix = "PDM";
304 clock-names = "pclk", "dclk", "sysclk";
309 compatible = "simple-bus";
310 reg = <0x0 0xff634000 0x0 0x2000>;
311 #address-cells = <2>;
312 #size-cells = <2>;
316 compatible = "amlogic,meson-rng";
317 reg = <0x0 0x18 0x0 0x4>;
319 clock-names = "core";
323 compatible = "amlogic,meson-axg-periphs-pinctrl";
324 #address-cells = <2>;
325 #size-cells = <2>;
329 reg = <0x0 0x00480 0x0 0x40>,
333 reg-names = "mux", "pull", "pull-enable", "gpio";
334 gpio-controller;
335 #gpio-cells = <2>;
336 gpio-ranges = <&pinctrl_periphs 0 0 86>;
340 mux {
344 bias-disable;
349 mux {
353 bias-disable;
358 mux {
362 bias-disable;
367 mux {
371 bias-disable;
376 mux {
380 bias-disable;
385 mux {
389 bias-disable;
394 mux {
398 bias-disable;
403 mux {
407 bias-disable;
412 mux-0 {
423 bias-pull-up;
426 mux-1 {
429 bias-disable;
434 mux {
437 bias-pull-down;
442 mux {
445 bias-pull-down;
449 eth_rgmii_x_pins: eth-x-rgmii {
450 mux {
466 bias-disable;
470 eth_rgmii_y_pins: eth-y-rgmii {
471 mux {
487 bias-disable;
491 eth_rmii_x_pins: eth-x-rmii {
492 mux {
503 bias-disable;
507 eth_rmii_y_pins: eth-y-rmii {
508 mux {
519 bias-disable;
524 mux {
527 bias-disable;
532 mux {
535 bias-disable;
540 mux {
543 bias-disable;
548 mux {
551 bias-disable;
556 mux {
559 bias-disable;
564 mux {
567 bias-disable;
572 mux {
575 bias-disable;
580 mux {
583 bias-disable;
588 mux {
591 bias-disable;
596 mux {
599 bias-disable;
604 mux {
607 bias-disable;
612 mux {
615 bias-disable;
620 mux {
623 bias-disable;
628 mux {
631 bias-disable;
636 mux {
639 bias-disable;
644 mux {
647 bias-disable;
652 mux {
655 bias-disable;
660 mux {
663 bias-disable;
668 mux {
671 bias-disable;
676 mux {
679 bias-disable;
684 mux-0 {
691 bias-pull-up;
694 mux-1 {
697 bias-disable;
702 mux {
705 bias-pull-down;
710 mux {
713 bias-disable;
718 mux {
721 bias-disable;
726 mux {
729 bias-disable;
734 mux {
737 bias-disable;
742 mux {
745 bias-disable;
750 mux {
753 bias-disable;
758 mux {
761 bias-disable;
766 mux {
769 bias-disable;
774 mux {
777 bias-disable;
782 mux {
785 bias-disable;
790 mux {
795 bias-disable;
800 mux {
803 bias-disable;
808 mux {
811 bias-disable;
816 mux {
819 bias-disable;
824 mux {
829 bias-disable;
834 mux {
837 bias-disable;
842 mux {
845 bias-disable;
850 mux {
855 bias-disable;
860 mux {
863 bias-disable;
868 mux {
871 bias-disable;
876 mux {
879 bias-disable;
884 mux {
887 bias-disable;
892 mux {
895 bias-disable;
900 mux {
903 bias-disable;
908 mux {
911 bias-disable;
916 mux {
919 bias-disable;
924 mux {
927 bias-disable;
932 mux {
935 bias-disable;
940 mux {
943 bias-disable;
948 mux {
951 bias-disable;
956 mux {
959 bias-disable;
964 mux {
967 bias-disable;
972 mux {
975 bias-disable;
980 mux {
983 bias-disable;
988 mux {
991 bias-disable;
996 mux {
999 bias-disable;
1004 mux {
1007 bias-disable;
1012 mux {
1015 bias-disable;
1020 mux {
1023 bias-disable;
1028 mux {
1031 bias-disable;
1036 mux {
1039 bias-disable;
1044 mux {
1047 bias-disable;
1052 mux {
1055 bias-disable;
1060 mux {
1063 bias-disable;
1068 mux {
1071 bias-disable;
1076 mux {
1079 bias-disable;
1084 mux {
1087 bias-disable;
1092 mux {
1095 bias-disable;
1100 mux {
1103 bias-disable;
1108 mux {
1111 bias-disable;
1116 mux {
1119 bias-disable;
1124 mux {
1127 bias-disable;
1132 mux {
1136 bias-disable;
1141 mux {
1145 bias-disable;
1150 mux {
1154 bias-disable;
1159 mux {
1163 bias-disable;
1168 mux {
1172 bias-disable;
1177 mux {
1181 bias-disable;
1186 mux {
1190 bias-disable;
1195 mux {
1199 bias-disable;
1206 compatible = "simple-bus";
1207 reg = <0x0 0xff63c000 0x0 0x1c00>;
1208 #address-cells = <2>;
1209 #size-cells = <2>;
1212 sysctrl: system-controller@0 {
1213 compatible = "amlogic,meson-axg-hhi-sysctrl",
1214 "simple-mfd", "syscon";
1215 reg = <0 0 0 0x400>;
1217 clkc: clock-controller {
1218 compatible = "amlogic,axg-clkc";
1219 #clock-cells = <1>;
1221 clock-names = "xtal";
1224 pwrc: power-controller {
1225 compatible = "amlogic,meson-axg-pwrc";
1226 #power-domain-cells = <1>;
1227 amlogic,ao-sysctrl = <&sysctrl_AO>;
1233 reset-names = "viu", "venc", "vcbus",
1237 clock-names = "vpu", "vapb";
1241 * free mux to safely change frequency while running.
1242 * Same for VAPB but with a final gate after the glitch free mux.
1244 assigned-clocks = <&clkc CLKID_VPU_0_SEL>,
1246 <&clkc CLKID_VPU>, /* Glitch free mux */
1249 <&clkc CLKID_VAPB_SEL>; /* Glitch free mux */
1250 assigned-clock-parents = <&clkc CLKID_FCLK_DIV4>,
1256 assigned-clock-rates = <0>, /* Do Nothing */
1265 compatible = "amlogic,axg-mipi-pcie-analog-phy";
1266 #phy-cells = <0>;
1273 compatible = "amlogic,meson-gxbb-mhu";
1274 reg = <0 0xff63c404 0 0x4c>;
1278 #mbox-cells = <1>;
1282 compatible = "amlogic,axg-mipi-dphy";
1283 reg = <0x0 0xff640000 0x0 0x100>;
1285 clock-names = "pclk";
1287 reset-names = "phy";
1289 phy-names = "analog";
1290 #phy-cells = <0>;
1295 compatible = "simple-bus";
1296 reg = <0x0 0xff642000 0x0 0x2000>;
1297 #address-cells = <2>;
1298 #size-cells = <2>;
1301 clkc_audio: clock-controller@0 {
1302 compatible = "amlogic,axg-audio-clkc";
1303 reg = <0x0 0x0 0x0 0xb4>;
1304 #clock-cells = <1>;
1315 clock-names = "pclk",
1328 toddr_a: audio-controller@100 {
1329 compatible = "amlogic,axg-toddr";
1330 reg = <0x0 0x100 0x0 0x2c>;
1331 #sound-dai-cells = <0>;
1332 sound-name-prefix = "TODDR_A";
1336 amlogic,fifo-depth = <512>;
1340 toddr_b: audio-controller@140 {
1341 compatible = "amlogic,axg-toddr";
1342 reg = <0x0 0x140 0x0 0x2c>;
1343 #sound-dai-cells = <0>;
1344 sound-name-prefix = "TODDR_B";
1348 amlogic,fifo-depth = <256>;
1352 toddr_c: audio-controller@180 {
1353 compatible = "amlogic,axg-toddr";
1354 reg = <0x0 0x180 0x0 0x2c>;
1355 #sound-dai-cells = <0>;
1356 sound-name-prefix = "TODDR_C";
1360 amlogic,fifo-depth = <256>;
1364 frddr_a: audio-controller@1c0 {
1365 compatible = "amlogic,axg-frddr";
1366 reg = <0x0 0x1c0 0x0 0x2c>;
1367 #sound-dai-cells = <0>;
1368 sound-name-prefix = "FRDDR_A";
1372 amlogic,fifo-depth = <512>;
1376 frddr_b: audio-controller@200 {
1377 compatible = "amlogic,axg-frddr";
1378 reg = <0x0 0x200 0x0 0x2c>;
1379 #sound-dai-cells = <0>;
1380 sound-name-prefix = "FRDDR_B";
1384 amlogic,fifo-depth = <256>;
1388 frddr_c: audio-controller@240 {
1389 compatible = "amlogic,axg-frddr";
1390 reg = <0x0 0x240 0x0 0x2c>;
1391 #sound-dai-cells = <0>;
1392 sound-name-prefix = "FRDDR_C";
1396 amlogic,fifo-depth = <256>;
1400 arb: reset-controller@280 {
1401 compatible = "amlogic,meson-axg-audio-arb";
1402 reg = <0x0 0x280 0x0 0x4>;
1403 #reset-cells = <1>;
1407 tdmin_a: audio-controller@300 {
1408 compatible = "amlogic,axg-tdmin";
1409 reg = <0x0 0x300 0x0 0x40>;
1410 sound-name-prefix = "TDMIN_A";
1416 clock-names = "pclk", "sclk", "sclk_sel",
1421 tdmin_b: audio-controller@340 {
1422 compatible = "amlogic,axg-tdmin";
1423 reg = <0x0 0x340 0x0 0x40>;
1424 sound-name-prefix = "TDMIN_B";
1430 clock-names = "pclk", "sclk", "sclk_sel",
1435 tdmin_c: audio-controller@380 {
1436 compatible = "amlogic,axg-tdmin";
1437 reg = <0x0 0x380 0x0 0x40>;
1438 sound-name-prefix = "TDMIN_C";
1444 clock-names = "pclk", "sclk", "sclk_sel",
1449 tdmin_lb: audio-controller@3c0 {
1450 compatible = "amlogic,axg-tdmin";
1451 reg = <0x0 0x3c0 0x0 0x40>;
1452 sound-name-prefix = "TDMIN_LB";
1458 clock-names = "pclk", "sclk", "sclk_sel",
1463 spdifin: audio-controller@400 {
1464 compatible = "amlogic,axg-spdifin";
1465 reg = <0x0 0x400 0x0 0x30>;
1466 #sound-dai-cells = <0>;
1467 sound-name-prefix = "SPDIFIN";
1471 clock-names = "pclk", "refclk";
1475 spdifout: audio-controller@480 {
1476 compatible = "amlogic,axg-spdifout";
1477 reg = <0x0 0x480 0x0 0x50>;
1478 #sound-dai-cells = <0>;
1479 sound-name-prefix = "SPDIFOUT";
1482 clock-names = "pclk", "mclk";
1486 tdmout_a: audio-controller@500 {
1487 compatible = "amlogic,axg-tdmout";
1488 reg = <0x0 0x500 0x0 0x40>;
1489 sound-name-prefix = "TDMOUT_A";
1495 clock-names = "pclk", "sclk", "sclk_sel",
1500 tdmout_b: audio-controller@540 {
1501 compatible = "amlogic,axg-tdmout";
1502 reg = <0x0 0x540 0x0 0x40>;
1503 sound-name-prefix = "TDMOUT_B";
1509 clock-names = "pclk", "sclk", "sclk_sel",
1514 tdmout_c: audio-controller@580 {
1515 compatible = "amlogic,axg-tdmout";
1516 reg = <0x0 0x580 0x0 0x40>;
1517 sound-name-prefix = "TDMOUT_C";
1523 clock-names = "pclk", "sclk", "sclk_sel",
1530 compatible = "simple-bus";
1531 reg = <0x0 0xff800000 0x0 0x100000>;
1532 #address-cells = <2>;
1533 #size-cells = <2>;
1536 sysctrl_AO: sys-ctrl@0 {
1537 compatible = "amlogic,meson-axg-ao-sysctrl", "simple-mfd", "syscon";
1538 reg = <0x0 0x0 0x0 0x100>;
1540 clkc_AO: clock-controller {
1541 compatible = "amlogic,meson-axg-aoclkc";
1542 #clock-cells = <1>;
1543 #reset-cells = <1>;
1545 clock-names = "xtal", "mpeg-clk";
1550 compatible = "amlogic,meson-axg-aobus-pinctrl";
1551 #address-cells = <2>;
1552 #size-cells = <2>;
1556 reg = <0x0 0x00014 0x0 0x8>,
1559 reg-names = "mux", "pull", "gpio";
1560 gpio-controller;
1561 #gpio-cells = <2>;
1562 gpio-ranges = <&pinctrl_aobus 0 0 15>;
1566 mux {
1569 bias-disable;
1574 mux {
1577 bias-disable;
1582 mux {
1585 bias-disable;
1590 mux {
1593 bias-disable;
1598 mux {
1601 bias-disable;
1606 mux {
1609 bias-disable;
1614 mux {
1617 bias-disable;
1622 mux {
1626 bias-disable;
1631 mux {
1635 bias-disable;
1640 mux {
1644 bias-disable;
1649 mux {
1653 bias-disable;
1658 sec_AO: ao-secure@140 {
1659 compatible = "amlogic,meson-gx-ao-secure", "syscon";
1660 reg = <0x0 0x140 0x0 0x140>;
1661 amlogic,has-chip-id;
1665 compatible = "amlogic,meson-axg-ao-pwm";
1666 reg = <0x0 0x02000 0x0 0x20>;
1667 #pwm-cells = <3>;
1672 compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
1673 reg = <0x0 0x3000 0x0 0x18>;
1676 clock-names = "xtal", "pclk", "baud";
1681 compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
1682 reg = <0x0 0x4000 0x0 0x18>;
1685 clock-names = "xtal", "pclk", "baud";
1690 compatible = "amlogic,meson-axg-i2c";
1691 reg = <0x0 0x05000 0x0 0x20>;
1694 #address-cells = <1>;
1695 #size-cells = <0>;
1700 compatible = "amlogic,meson-axg-ao-pwm";
1701 reg = <0x0 0x07000 0x0 0x20>;
1702 #pwm-cells = <3>;
1707 compatible = "amlogic,meson-gxbb-ir";
1708 reg = <0x0 0x8000 0x0 0x20>;
1714 compatible = "amlogic,meson-axg-saradc",
1715 "amlogic,meson-saradc";
1716 reg = <0x0 0x9000 0x0 0x38>;
1717 #io-channel-cells = <1>;
1723 clock-names = "clkin", "core", "adc_clk", "adc_sel";
1729 compatible = "amlogic,axg-ge2d";
1730 reg = <0x0 0xff940000 0x0 0x10000>;
1736 gic: interrupt-controller@ffc01000 {
1737 compatible = "arm,gic-400";
1738 reg = <0x0 0xffc01000 0 0x1000>,
1742 interrupt-controller;
1745 #interrupt-cells = <3>;
1746 #address-cells = <0>;
1750 compatible = "simple-bus";
1751 reg = <0x0 0xffd00000 0x0 0x25000>;
1752 #address-cells = <2>;
1753 #size-cells = <2>;
1756 reset: reset-controller@1004 {
1757 compatible = "amlogic,meson-axg-reset";
1758 reg = <0x0 0x01004 0x0 0x9c>;
1759 #reset-cells = <1>;
1762 gpio_intc: interrupt-controller@f080 {
1763 compatible = "amlogic,meson-axg-gpio-intc",
1764 "amlogic,meson-gpio-intc";
1765 reg = <0x0 0xf080 0x0 0x10>;
1766 interrupt-controller;
1767 #interrupt-cells = <2>;
1768 amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
1772 compatible = "amlogic,meson-gxbb-wdt";
1773 reg = <0x0 0xf0d0 0x0 0x10>;
1778 compatible = "amlogic,meson-axg-ee-pwm";
1779 reg = <0x0 0x1b000 0x0 0x20>;
1780 #pwm-cells = <3>;
1785 compatible = "amlogic,meson-axg-ee-pwm";
1786 reg = <0x0 0x1a000 0x0 0x20>;
1787 #pwm-cells = <3>;
1792 compatible = "amlogic,meson-axg-spicc";
1793 reg = <0x0 0x13000 0x0 0x3c>;
1796 clock-names = "core";
1797 #address-cells = <1>;
1798 #size-cells = <0>;
1803 compatible = "amlogic,meson-axg-spicc";
1804 reg = <0x0 0x15000 0x0 0x3c>;
1807 clock-names = "core";
1808 #address-cells = <1>;
1809 #size-cells = <0>;
1813 clk_msr: clock-measure@18000 {
1814 compatible = "amlogic,meson-axg-clk-measure";
1815 reg = <0x0 0x18000 0x0 0x10>;
1819 compatible = "amlogic,meson-axg-i2c";
1820 reg = <0x0 0x1c000 0x0 0x20>;
1823 #address-cells = <1>;
1824 #size-cells = <0>;
1829 compatible = "amlogic,meson-axg-i2c";
1830 reg = <0x0 0x1d000 0x0 0x20>;
1833 #address-cells = <1>;
1834 #size-cells = <0>;
1839 compatible = "amlogic,meson-axg-i2c";
1840 reg = <0x0 0x1e000 0x0 0x20>;
1843 #address-cells = <1>;
1844 #size-cells = <0>;
1849 compatible = "amlogic,meson-axg-i2c";
1850 reg = <0x0 0x1f000 0x0 0x20>;
1853 #address-cells = <1>;
1854 #size-cells = <0>;
1859 compatible = "amlogic,meson-gx-uart";
1860 reg = <0x0 0x23000 0x0 0x18>;
1864 clock-names = "xtal", "pclk", "baud";
1868 compatible = "amlogic,meson-gx-uart";
1869 reg = <0x0 0x24000 0x0 0x18>;
1873 clock-names = "xtal", "pclk", "baud";
1874 fifo-size = <128>;
1879 compatible = "simple-bus";
1880 reg = <0x0 0xffe00000 0x0 0x200000>;
1881 #address-cells = <2>;
1882 #size-cells = <2>;
1886 compatible = "amlogic,meson-axg-mmc";
1887 reg = <0x0 0x5000 0x0 0x800>;
1893 clock-names = "core", "clkin0", "clkin1";
1898 compatible = "amlogic,meson-axg-mmc";
1899 reg = <0x0 0x7000 0x0 0x800>;
1905 clock-names = "core", "clkin0", "clkin1";
1910 compatible = "amlogic,meson-gxl-usb2-phy";
1911 #phy-cells = <0>;
1912 reg = <0x0 0x9020 0x0 0x20>;
1914 clock-names = "phy";
1916 reset-names = "phy";
1921 compatible = "mmio-sram";
1922 reg = <0x0 0xfffc0000 0x0 0x20000>;
1923 #address-cells = <1>;
1924 #size-cells = <1>;
1927 cpu_scp_lpri: scp-sram@13000 {
1928 compatible = "amlogic,meson-axg-scp-shmem";
1929 reg = <0x13000 0x400>;
1932 cpu_scp_hpri: scp-sram@13400 {
1933 compatible = "amlogic,meson-axg-scp-shmem";
1934 reg = <0x13400 0x400>;
1940 compatible = "arm,armv8-timer";
1951 xtal: xtal-clk {
1952 compatible = "fixed-clock";
1953 clock-frequency = <24000000>;
1954 clock-output-names = "xtal";
1955 #clock-cells = <0>;