Lines Matching +full:vcc +full:- +full:supply

1 // SPDX-License-Identifier: (GPL-2.0+ or MIT)
6 /dts-v1/;
8 #include "sun50i-h616.dtsi"
10 #include <dt-bindings/gpio/gpio.h>
11 #include <dt-bindings/interrupt-controller/arm-gic.h>
12 #include <dt-bindings/leds/common.h>
16 compatible = "xunlong,orangepi-zero2", "allwinner,sun50i-h616";
24 stdout-path = "serial0:115200n8";
28 compatible = "gpio-leds";
30 led-0 {
34 default-state = "on";
37 led-1 {
45 /* board wide 5V supply directly from the USB-C socket */
46 compatible = "regulator-fixed";
47 regulator-name = "vcc-5v";
48 regulator-min-microvolt = <5000000>;
49 regulator-max-microvolt = <5000000>;
50 regulator-always-on;
55 pinctrl-names = "default";
56 pinctrl-0 = <&ext_rgmii_pins>;
57 phy-mode = "rgmii";
58 phy-handle = <&ext_rgmii_phy>;
59 phy-supply = <&reg_dcdce>;
60 allwinner,rx-delay-ps = <3100>;
61 allwinner,tx-delay-ps = <700>;
66 ext_rgmii_phy: ethernet-phy@1 {
67 compatible = "ethernet-phy-ieee802.3-c22";
73 vmmc-supply = <&reg_dcdce>;
74 cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
75 bus-width = <4>;
83 compatible = "x-powers,axp305", "x-powers,axp805",
84 "x-powers,axp806";
85 interrupt-controller;
86 #interrupt-cells = <1>;
89 x-powers,self-working-mode;
90 vina-supply = <&reg_vcc5v>;
91 vinb-supply = <&reg_vcc5v>;
92 vinc-supply = <&reg_vcc5v>;
93 vind-supply = <&reg_vcc5v>;
94 vine-supply = <&reg_vcc5v>;
95 aldoin-supply = <&reg_vcc5v>;
96 bldoin-supply = <&reg_vcc5v>;
97 cldoin-supply = <&reg_vcc5v>;
101 regulator-always-on;
102 regulator-min-microvolt = <3300000>;
103 regulator-max-microvolt = <3300000>;
104 regulator-name = "vcc-sys";
108 regulator-always-on;
109 regulator-min-microvolt = <3300000>;
110 regulator-max-microvolt = <3300000>;
111 regulator-name = "vcc3v3-ext";
115 regulator-always-on;
116 regulator-min-microvolt = <3300000>;
117 regulator-max-microvolt = <3300000>;
118 regulator-name = "vcc3v3-ext2";
122 regulator-always-on;
123 regulator-min-microvolt = <1800000>;
124 regulator-max-microvolt = <1800000>;
125 regulator-name = "vcc1v8";
153 regulator-always-on;
154 regulator-min-microvolt = <810000>;
155 regulator-max-microvolt = <1100000>;
156 regulator-name = "vdd-cpu";
160 regulator-always-on;
161 regulator-min-microvolt = <810000>;
162 regulator-max-microvolt = <990000>;
163 regulator-name = "vdd-gpu-sys";
167 regulator-always-on;
168 regulator-min-microvolt = <1500000>;
169 regulator-max-microvolt = <1500000>;
170 regulator-name = "vdd-dram";
174 regulator-always-on;
175 regulator-min-microvolt = <3300000>;
176 regulator-max-microvolt = <3300000>;
177 regulator-name = "vcc-eth-mmc";
188 vcc-pc-supply = <&reg_aldo1>;
189 vcc-pf-supply = <&reg_aldo1>;
190 vcc-pg-supply = <&reg_bldo1>;
191 vcc-ph-supply = <&reg_aldo1>;
192 vcc-pi-supply = <&reg_aldo1>;
197 pinctrl-names = "default";
198 pinctrl-0 = <&spi0_pins>, <&spi0_cs0_pin>;
201 #address-cells = <1>;
202 #size-cells = <1>;
203 compatible = "jedec,spi-nor";
205 spi-max-frequency = <40000000>;
210 pinctrl-names = "default";
211 pinctrl-0 = <&uart0_ph_pins>;