Lines Matching +full:zynq +full:- +full:7000
1 // SPDX-License-Identifier: GPL-2.0
3 * Copyright (C) 2011 - 2014 Xilinx
6 /dts-v1/;
7 #include "zynq-7000.dtsi"
11 compatible = "xlnx,zynq-zc702", "xlnx,zynq-7000";
27 stdout-path = "serial0:115200n8";
30 gpio-keys {
31 compatible = "gpio-keys";
33 switch-14 {
37 wakeup-source;
40 switch-13 {
44 wakeup-source;
50 compatible = "gpio-leds";
52 led-ds23 {
55 linux,default-trigger = "heartbeat";
60 compatible = "usb-nop-xceiv";
61 #phy-cells = <0>;
67 compatible = "mmio-sram";
69 #address-cells = <1>;
70 #size-cells = <1>;
72 ocm-sram@0 {
80 pinctrl-names = "default";
81 pinctrl-0 = <&pinctrl_can0_default>;
85 ps-clk-frequency = <33333333>;
90 phy-mode = "rgmii-id";
91 phy-handle = <ðernet_phy>;
92 pinctrl-names = "default";
93 pinctrl-0 = <&pinctrl_gem0_default>;
95 ethernet_phy: ethernet-phy@7 {
97 device_type = "ethernet-phy";
102 pinctrl-names = "default";
103 pinctrl-0 = <&pinctrl_gpio0_default>;
108 clock-frequency = <400000>;
109 pinctrl-names = "default";
110 pinctrl-0 = <&pinctrl_i2c0_default>;
112 i2c-mux@74 {
114 #address-cells = <1>;
115 #size-cells = <0>;
119 #address-cells = <1>;
120 #size-cells = <0>;
122 si570: clock-generator@5d {
123 #clock-cells = <0>;
125 temperature-stability = <50>;
127 factory-fout = <156250000>;
128 clock-frequency = <148500000>;
133 #address-cells = <1>;
134 #size-cells = <0>;
136 adv7511: hdmi-tx@39 {
139 adi,input-depth = <8>;
140 adi,input-colorspace = "yuv422";
141 adi,input-clock = "1x";
142 adi,input-style = <3>;
143 adi,input-justification = "right";
148 #address-cells = <1>;
149 #size-cells = <0>;
158 #address-cells = <1>;
159 #size-cells = <0>;
164 gpio-controller;
165 #gpio-cells = <2>;
170 #address-cells = <1>;
171 #size-cells = <0>;
180 #address-cells = <1>;
181 #size-cells = <0>;
200 pinctrl_can0_default: can0-default {
208 slew-rate = <0>;
209 io-standard = <1>;
212 conf-rx {
214 bias-high-impedance;
217 conf-tx {
219 bias-disable;
223 pinctrl_gem0_default: gem0-default {
231 slew-rate = <0>;
232 io-standard = <4>;
235 conf-rx {
237 bias-high-impedance;
238 low-power-disable;
241 conf-tx {
243 bias-disable;
244 low-power-enable;
247 mux-mdio {
252 conf-mdio {
254 slew-rate = <0>;
255 io-standard = <1>;
256 bias-disable;
260 pinctrl_gpio0_default: gpio0-default {
272 slew-rate = <0>;
273 io-standard = <1>;
276 conf-pull-up {
278 bias-pull-up;
281 conf-pull-none {
283 bias-disable;
287 pinctrl_i2c0_default: i2c0-default {
295 bias-pull-up;
296 slew-rate = <0>;
297 io-standard = <1>;
301 pinctrl_sdhci0_default: sdhci0-default {
309 slew-rate = <0>;
310 io-standard = <1>;
311 bias-disable;
314 mux-cd {
319 conf-cd {
321 bias-high-impedance;
322 bias-pull-up;
323 slew-rate = <0>;
324 io-standard = <1>;
327 mux-wp {
332 conf-wp {
334 bias-high-impedance;
335 bias-pull-up;
336 slew-rate = <0>;
337 io-standard = <1>;
341 pinctrl_uart1_default: uart1-default {
349 slew-rate = <0>;
350 io-standard = <1>;
353 conf-rx {
355 bias-high-impedance;
358 conf-tx {
360 bias-disable;
364 pinctrl_usb0_default: usb0-default {
372 slew-rate = <0>;
373 io-standard = <1>;
376 conf-rx {
378 bias-high-impedance;
381 conf-tx {
384 bias-disable;
391 pinctrl-names = "default";
392 pinctrl-0 = <&pinctrl_sdhci0_default>;
397 pinctrl-names = "default";
398 pinctrl-0 = <&pinctrl_uart1_default>;
404 usb-phy = <&usb_phy0>;
405 pinctrl-names = "default";
406 pinctrl-0 = <&pinctrl_usb0_default>;