Lines Matching +full:dc +full:- +full:dc +full:- +full:max +full:- +full:microvolt
1 // SPDX-License-Identifier: GPL-2.0 OR MIT
2 /dts-v1/;
4 #include <dt-bindings/input/input.h>
5 #include "tegra20-colibri.dtsi"
9 compatible = "toradex,colibri_t20-eval-v3", "toradex,colibri_t20",
22 stdout-path = "serial0:115200n8";
26 dc@54200000 {
35 hdmi-supply = <®_5v0>;
41 bl-on {
49 hotplug-detect {
85 uart-a {
89 uart-b {
93 uart-c {
97 usbh-pen {
103 /* Colibri UART-A */
108 /* Colibri UART-C */
113 /* Colibri UART-B */
128 clock-frequency = <400000>;
146 /* EHCI instance 0: USB1_DP/N -> USBC_P/N */
152 usb-phy@c5000000 {
154 vbus-supply = <®_usbc_vbus>;
157 /* EHCI instance 2: USB3_DP/N -> USBH_P/N */
162 usb-phy@c5008000 {
164 vbus-supply = <®_usbh_vbus>;
170 spi-max-frequency = <25000000>;
176 interrupt-parent = <&gpio>;
179 spi-max-frequency = <10000000>;
180 vdd-supply = <®_3v3>;
181 xceiver-supply = <®_5v0>;
188 bus-width = <4>;
189 cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>; /* MMCD */
190 no-1-8-v;
194 compatible = "pwm-backlight";
195 brightness-levels = <255 128 64 32 16 8 4 0>;
196 default-brightness-level = <6>;
198 enable-gpios = <&gpio TEGRA_GPIO(T, 4) GPIO_ACTIVE_HIGH>;
199 power-supply = <®_3v3>;
204 compatible = "fixed-clock";
205 #clock-cells = <0>;
206 clock-frequency = <16000000>;
209 gpio-keys {
210 compatible = "gpio-keys";
212 key-wakeup {
216 debounce-interval = <10>;
217 wakeup-source;
228 power-supply = <®_3v3>;
231 reg_3v3: regulator-3v3 {
232 compatible = "regulator-fixed";
233 regulator-name = "3.3V_SW";
234 regulator-min-microvolt = <3300000>;
235 regulator-max-microvolt = <3300000>;
238 reg_5v0: regulator-5v0 {
239 compatible = "regulator-fixed";
240 regulator-name = "5V_SW";
241 regulator-min-microvolt = <5000000>;
242 regulator-max-microvolt = <5000000>;
245 reg_usbc_vbus: regulator-usbc-vbus {
246 compatible = "regulator-fixed";
247 regulator-name = "VCC_USB5";
248 regulator-min-microvolt = <5000000>;
249 regulator-max-microvolt = <5000000>;
250 vin-supply = <®_5v0>;
254 reg_usbh_vbus: regulator-usbh-vbus {
255 compatible = "regulator-fixed";
256 regulator-name = "VCC_USB[1-4]";
257 regulator-min-microvolt = <5000000>;
258 regulator-max-microvolt = <5000000>;
260 vin-supply = <®_5v0>;