Lines Matching +full:pmic +full:- +full:ext +full:- +full:control +full:- +full:gpios
1 // SPDX-License-Identifier: GPL-2.0
2 #include <dt-bindings/input/input.h>
3 #include <dt-bindings/thermal/thermal.h>
8 rtc0 = "/i2c@7000d000/pmic@40";
14 stdout-path = "serial0:115200n8";
20 * missing a unit-address. However, the bootloader on these Chromebook
22 * Adding the unit-address causes the bootloader to create a /memory
34 /delete-node/ memory@80000000;
40 vdd-supply = <&vdd_3v3_hdmi>;
41 pll-supply = <&vdd_hdmi_pll>;
42 hdmi-supply = <&vdd_5v0_hdmi>;
44 nvidia,ddc-i2c-bus = <&hdmi_ddc>;
45 nvidia,hpd-gpio =
52 avdd-io-hdmi-dp-supply = <&vdd_3v3_hdmi>;
53 vdd-hdmi-dp-pll-supply = <&vdd_hdmi_pll>;
60 vdd-supply = <&vdd_3v3_panel>;
68 vdd-supply = <&vdd_gpu>;
82 clock-frequency = <100000>;
84 acodec: audio-codec@10 {
87 interrupt-parent = <&gpio>;
91 tmp451: temperature-sensor@4c {
94 interrupt-parent = <&gpio>;
97 #thermal-sensor-cells = <1>;
103 clock-frequency = <100000>;
108 interrupt-parent = <&gpio>;
110 wakeup-source;
116 clock-frequency = <400000>;
126 clock-frequency = <100000>;
131 clock-frequency = <400000>;
133 pmic: pmic@40 { label
138 ams,system-power-controller;
140 #interrupt-cells = <2>;
141 interrupt-controller;
143 gpio-controller;
144 #gpio-cells = <2>;
146 pinctrl-names = "default";
147 pinctrl-0 = <&as3722_default>;
153 bias-pull-down;
159 bias-pull-up;
165 bias-pull-up;
170 bias-high-impedance;
175 function = "clk32k-out";
176 bias-pull-down;
181 vsup-sd2-supply = <&vdd_5v0_sys>;
182 vsup-sd3-supply = <&vdd_5v0_sys>;
183 vsup-sd4-supply = <&vdd_5v0_sys>;
184 vsup-sd5-supply = <&vdd_5v0_sys>;
185 vin-ldo0-supply = <&vdd_1v35_lp0>;
186 vin-ldo1-6-supply = <&vdd_3v3_run>;
187 vin-ldo2-5-7-supply = <&vddio_1v8>;
188 vin-ldo3-4-supply = <&vdd_3v3_sys>;
189 vin-ldo9-10-supply = <&vdd_5v0_sys>;
190 vin-ldo11-supply = <&vdd_3v3_run>;
193 regulator-name = "+VDD_CPU_AP";
194 regulator-min-microvolt = <700000>;
195 regulator-max-microvolt = <1350000>;
196 regulator-min-microamp = <3500000>;
197 regulator-max-microamp = <3500000>;
198 regulator-always-on;
199 regulator-boot-on;
200 ams,ext-control = <2>;
204 regulator-name = "+VDD_CORE";
205 regulator-min-microvolt = <700000>;
206 regulator-max-microvolt = <1350000>;
207 regulator-min-microamp = <2500000>;
208 regulator-max-microamp = <4000000>;
209 regulator-always-on;
210 regulator-boot-on;
211 ams,ext-control = <1>;
215 regulator-name = "+1.35V_LP0(sd2)";
216 regulator-min-microvolt = <1350000>;
217 regulator-max-microvolt = <1350000>;
218 regulator-always-on;
219 regulator-boot-on;
223 regulator-name = "+1.35V_LP0(sd3)";
224 regulator-min-microvolt = <1350000>;
225 regulator-max-microvolt = <1350000>;
226 regulator-always-on;
227 regulator-boot-on;
231 regulator-name = "+1.05V_RUN";
232 regulator-min-microvolt = <1050000>;
233 regulator-max-microvolt = <1050000>;
237 regulator-name = "+1.8V_VDDIO";
238 regulator-min-microvolt = <1800000>;
239 regulator-max-microvolt = <1800000>;
240 regulator-always-on;
244 regulator-name = "+VDD_GPU_AP";
245 regulator-min-microvolt = <650000>;
246 regulator-max-microvolt = <1200000>;
247 regulator-min-microamp = <3500000>;
248 regulator-max-microamp = <3500000>;
249 regulator-boot-on;
250 regulator-always-on;
254 regulator-name = "+1.05V_RUN_AVDD";
255 regulator-min-microvolt = <1050000>;
256 regulator-max-microvolt = <1050000>;
257 regulator-boot-on;
258 regulator-always-on;
259 ams,ext-control = <1>;
263 regulator-name = "+1.8V_RUN_CAM";
264 regulator-min-microvolt = <1800000>;
265 regulator-max-microvolt = <1800000>;
269 regulator-name = "+1.2V_GEN_AVDD";
270 regulator-min-microvolt = <1200000>;
271 regulator-max-microvolt = <1200000>;
272 regulator-boot-on;
273 regulator-always-on;
277 regulator-name = "+1.00V_LP0_VDD_RTC";
278 regulator-min-microvolt = <1000000>;
279 regulator-max-microvolt = <1000000>;
280 regulator-boot-on;
281 regulator-always-on;
282 ams,enable-tracking;
286 regulator-name = "+3.3V_RUN_CAM";
287 regulator-min-microvolt = <2800000>;
288 regulator-max-microvolt = <2800000>;
292 regulator-name = "+1.2V_RUN_CAM_FRONT";
293 regulator-min-microvolt = <1200000>;
294 regulator-max-microvolt = <1200000>;
298 regulator-name = "+VDDIO_SDMMC3";
299 regulator-min-microvolt = <1800000>;
300 regulator-max-microvolt = <3300000>;
304 regulator-name = "+1.05V_RUN_CAM_REAR";
305 regulator-min-microvolt = <1050000>;
306 regulator-max-microvolt = <1050000>;
310 regulator-name = "+2.8V_RUN_TOUCH";
311 regulator-min-microvolt = <2800000>;
312 regulator-max-microvolt = <2800000>;
316 regulator-name = "+2.8V_RUN_CAM_AF";
317 regulator-min-microvolt = <2800000>;
318 regulator-max-microvolt = <2800000>;
322 regulator-name = "+1.8V_RUN_VPP_FUSE";
323 regulator-min-microvolt = <1800000>;
324 regulator-max-microvolt = <1800000>;
333 cros_ec: cros-ec@0 {
334 compatible = "google,cros-ec-spi";
335 spi-max-frequency = <3000000>;
336 interrupt-parent = <&gpio>;
340 google,cros-ec-spi-msg-delay = <2000>;
342 i2c-tunnel {
343 compatible = "google,cros-ec-i2c-tunnel";
344 #address-cells = <1>;
345 #size-cells = <0>;
347 google,remote-bus = <0>;
352 interrupt-parent = <&gpio>;
355 ti,ac-detect-gpios = <&gpio
358 ti,external-control;
361 battery: sbs-battery@b {
362 compatible = "sbs,sbs-battery";
364 sbs,i2c-retry-count = <2>;
365 sbs,poll-retry-count = <10>;
366 power-supplies = <&charger>;
374 spi-max-frequency = <25000000>;
377 compatible = "winbond,w25q32dw", "jedec,spi-nor";
378 spi-max-frequency = <25000000>;
384 nvidia,invert-interrupt;
385 nvidia,suspend-mode = <0>;
386 nvidia,cpu-pwr-good-time = <500>;
387 nvidia,cpu-pwr-off-time = <300>;
388 nvidia,core-pwr-good-time = <641 3845>;
389 nvidia,core-pwr-off-time = <61036>;
390 nvidia,core-power-req-active-high;
391 nvidia,sys-clock-req-active-high;
403 phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>, /* 1st USB A */
404 <&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>, /* Internal USB */
405 <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>, /* 2nd USB A */
406 <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>, /* 1st USB A */
407 <&{/padctl@7009f000/pads/pcie/lanes/pcie-1}>; /* 2nd USB A */
408 phy-names = "usb2-0", "usb2-1", "usb2-2", "usb3-0", "usb3-1";
410 avddio-pex-supply = <&vdd_1v05_run>;
411 dvddio-pex-supply = <&vdd_1v05_run>;
412 avdd-usb-supply = <&vdd_3v3_lp0>;
413 avdd-pll-utmip-supply = <&vddio_1v8>;
414 avdd-pll-erefe-supply = <&avdd_1v05_run>;
415 avdd-usb-ss-pll-supply = <&vdd_1v05_run>;
416 hvdd-usb-ss-supply = <&vdd_3v3_lp0>;
417 hvdd-usb-ss-pll-e-supply = <&vdd_3v3_lp0>;
425 avdd-pll-utmip-supply = <&vddio_1v8>;
426 avdd-pll-erefe-supply = <&avdd_1v05_run>;
427 avdd-pex-pll-supply = <&vdd_1v05_run>;
428 hvdd-pex-pll-e-supply = <&vdd_3v3_lp0>;
435 usb2-0 {
440 usb2-1 {
445 usb2-2 {
456 pcie-0 {
457 nvidia,function = "usb3-ss";
461 pcie-1 {
462 nvidia,function = "usb3-ss";
470 usb2-0 {
471 vbus-supply = <&vdd_usb1_vbus>;
474 usb-role-switch;
477 usb2-1 {
478 vbus-supply = <&vdd_run_cam>;
483 usb2-2 {
484 vbus-supply = <&vdd_usb3_vbus>;
489 usb3-0 {
490 nvidia,usb2-companion = <0>;
494 usb3-1 {
495 nvidia,usb2-companion = <1>;
502 compatible = "mmc-pwrseq-simple";
504 reset-gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>;
509 bus-width = <4>;
510 no-1-8-v;
511 non-removable;
512 mmc-pwrseq = <&sdhci0_pwrseq>;
513 vmmc-supply = <&vdd_3v3_lp0>;
514 vqmmc-supply = <&vddio_1v8>;
515 keep-power-in-suspend;
520 cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
521 power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
522 bus-width = <4>;
523 no-1-8-v;
524 vqmmc-supply = <&vddio_sdmmc3>;
529 bus-width = <8>;
530 no-1-8-v;
531 non-removable;
537 vdd-cpu-supply = <&vdd_cpu>;
538 nvidia,i2c-fs-rate = <400000>;
548 compatible = "pwm-backlight";
550 enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
551 power-supply = <&vdd_led>;
554 default-brightness-level = <224>;
555 brightness-levels =
591 clk32k_in: clock-32k {
592 compatible = "fixed-clock";
593 clock-frequency = <32768>;
594 #clock-cells = <0>;
599 vdd-cpu-supply = <&vdd_cpu>;
603 gpio-keys {
604 compatible = "gpio-keys";
606 switch-lid {
608 gpios = <&gpio TEGRA_GPIO(R, 4) GPIO_ACTIVE_LOW>;
609 linux,input-type = <5>;
611 debounce-interval = <1>;
612 wakeup-source;
615 key-power {
617 gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
619 debounce-interval = <30>;
620 wakeup-source;
624 vdd_mux: regulator-mux {
625 compatible = "regulator-fixed";
626 regulator-name = "+VDD_MUX";
627 regulator-min-microvolt = <12000000>;
628 regulator-max-microvolt = <12000000>;
629 regulator-always-on;
630 regulator-boot-on;
633 vdd_5v0_sys: regulator-5v0sys {
634 compatible = "regulator-fixed";
635 regulator-name = "+5V_SYS";
636 regulator-min-microvolt = <5000000>;
637 regulator-max-microvolt = <5000000>;
638 regulator-always-on;
639 regulator-boot-on;
640 vin-supply = <&vdd_mux>;
643 vdd_3v3_sys: regulator-3v3sys {
644 compatible = "regulator-fixed";
645 regulator-name = "+3.3V_SYS";
646 regulator-min-microvolt = <3300000>;
647 regulator-max-microvolt = <3300000>;
648 regulator-always-on;
649 regulator-boot-on;
650 vin-supply = <&vdd_mux>;
653 vdd_3v3_run: regulator-3v3run {
654 compatible = "regulator-fixed";
655 regulator-name = "+3.3V_RUN";
656 regulator-min-microvolt = <3300000>;
657 regulator-max-microvolt = <3300000>;
658 regulator-always-on;
659 regulator-boot-on;
660 gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
661 enable-active-high;
662 vin-supply = <&vdd_3v3_sys>;
665 vdd_3v3_hdmi: regulator-3v3hdmi {
666 compatible = "regulator-fixed";
667 regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
668 regulator-min-microvolt = <3300000>;
669 regulator-max-microvolt = <3300000>;
670 vin-supply = <&vdd_3v3_run>;
673 vdd_led: regulator-led {
674 compatible = "regulator-fixed";
675 regulator-name = "+VDD_LED";
677 enable-active-high;
678 vin-supply = <&vdd_mux>;
681 vdd_5v0_ts: regulator-ts {
682 compatible = "regulator-fixed";
683 regulator-name = "+5V_VDD_TS_SW";
684 regulator-min-microvolt = <5000000>;
685 regulator-max-microvolt = <5000000>;
686 regulator-boot-on;
688 enable-active-high;
689 vin-supply = <&vdd_5v0_sys>;
692 vdd_usb1_vbus: regulator-usb1 {
693 compatible = "regulator-fixed";
694 regulator-name = "+5V_USB_HS";
695 regulator-min-microvolt = <5000000>;
696 regulator-max-microvolt = <5000000>;
698 enable-active-high;
699 gpio-open-drain;
700 vin-supply = <&vdd_5v0_sys>;
703 vdd_usb3_vbus: regulator-usb3 {
704 compatible = "regulator-fixed";
705 regulator-name = "+5V_USB_SS";
706 regulator-min-microvolt = <5000000>;
707 regulator-max-microvolt = <5000000>;
709 enable-active-high;
710 gpio-open-drain;
711 vin-supply = <&vdd_5v0_sys>;
714 vdd_3v3_panel: regulator-panel {
715 compatible = "regulator-fixed";
716 regulator-name = "+3.3V_PANEL";
717 regulator-min-microvolt = <3300000>;
718 regulator-max-microvolt = <3300000>;
719 gpio = <&pmic 4 GPIO_ACTIVE_HIGH>;
720 enable-active-high;
721 vin-supply = <&vdd_3v3_run>;
724 vdd_3v3_lp0: regulator-lp0 {
725 compatible = "regulator-fixed";
726 regulator-name = "+3.3V_LP0";
727 regulator-min-microvolt = <3300000>;
728 regulator-max-microvolt = <3300000>;
733 regulator-always-on;
734 gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
735 enable-active-high;
736 vin-supply = <&vdd_3v3_sys>;
739 vdd_hdmi_pll: regulator-hdmipll {
740 compatible = "regulator-fixed";
741 regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
742 regulator-min-microvolt = <1050000>;
743 regulator-max-microvolt = <1050000>;
745 vin-supply = <&vdd_1v05_run>;
748 vdd_5v0_hdmi: regulator-hdmicon {
749 compatible = "regulator-fixed";
750 regulator-name = "+5V_HDMI_CON";
751 regulator-min-microvolt = <5000000>;
752 regulator-max-microvolt = <5000000>;
754 enable-active-high;
755 vin-supply = <&vdd_5v0_sys>;
759 nvidia,audio-routing =
769 nvidia,i2s-controller = <&tegra_i2s1>;
770 nvidia,audio-codec = <&acodec>;
775 clock-names = "pll_a", "pll_a_out0", "mclk";
777 assigned-clocks = <&tegra_car TEGRA124_CLK_EXTERN1>,
780 assigned-clock-parents = <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
783 nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(I, 7) GPIO_ACTIVE_HIGH>;
784 nvidia,mic-det-gpios =
788 gpio-restart {
789 compatible = "gpio-restart";
790 gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
796 #cooling-cells = <2>;
800 #cooling-cells = <2>;
804 #cooling-cells = <2>;
808 #cooling-cells = <2>;
812 thermal-zones {
813 cpu-skin-thermal {
814 polling-delay-passive = <1000>; /* milliseconds */
815 polling-delay = <5000>; /* milliseconds */
817 thermal-sensors = <&tmp451 0>;
820 cpu_passive_trip: cpu-alert0 {
828 cooling-maps {
831 cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
841 #include "cros-ec-keyboard.dtsi"