Lines Matching +full:wakeup +full:- +full:parent
1 // SPDX-License-Identifier: GPL-2.0
9 /dts-v1/;
11 #include <dt-bindings/gpio/gpio.h>
12 #include <dt-bindings/input/input.h>
25 stdout-path = "serial0:115200n8";
33 d3_3v: regulator-3v3 {
34 compatible = "regulator-fixed";
35 regulator-name = "D3.3V";
36 regulator-min-microvolt = <3300000>;
37 regulator-max-microvolt = <3300000>;
38 regulator-boot-on;
39 regulator-always-on;
45 phy-mode = "mii";
46 interrupt-parent = <&irqc>;
48 smsc,irq-push-pull;
49 reg-io-width = <4>;
50 vddvario-supply = <&d3_3v>;
51 vdd33a-supply = <&d3_3v>;
53 pinctrl-0 = <&lan89218_pins>;
54 pinctrl-names = "default";
57 vga-encoder {
61 #address-cells = <1>;
62 #size-cells = <0>;
67 remote-endpoint = <&du_out_rgb1>;
73 remote-endpoint = <&vga_in>;
79 hdmi-out {
80 compatible = "hdmi-connector";
85 remote-endpoint = <&adv7511_out>;
91 compatible = "vga-connector";
95 remote-endpoint = <&adv7123_out>;
101 compatible = "fixed-clock";
102 #clock-cells = <0>;
103 clock-frequency = <74250000>;
107 compatible = "fixed-clock";
108 #clock-cells = <0>;
109 clock-frequency = <65000000>;
113 compatible = "gpio-keys";
115 pinctrl-0 = <&keyboard_pins>;
116 pinctrl-names = "default";
118 key-1 {
120 label = "SW2-1";
121 wakeup-source;
122 debounce-interval = <20>;
125 key-2 {
127 label = "SW2-2";
128 wakeup-source;
129 debounce-interval = <20>;
132 key-3 {
134 label = "SW2-3";
135 wakeup-source;
136 debounce-interval = <20>;
139 key-4 {
141 label = "SW2-4";
142 wakeup-source;
143 debounce-interval = <20>;
146 key-a {
149 wakeup-source;
150 debounce-interval = <20>;
153 key-b {
156 wakeup-source;
157 debounce-interval = <20>;
163 compatible = "gpio-leds";
179 vcc_sdhi0: regulator-vcc-sdhi0 {
180 compatible = "regulator-fixed";
182 regulator-name = "SDHI0 Vcc";
183 regulator-min-microvolt = <3300000>;
184 regulator-max-microvolt = <3300000>;
187 enable-active-high;
192 clock-frequency = <20000000>;
196 clock-frequency = <48000000>;
243 bias-pull-up;
253 timeout-sec = <60>;
258 pinctrl-0 = <&scif0_pins>;
259 pinctrl-names = "default";
265 pinctrl-0 = <&scif3_pins>;
266 pinctrl-names = "default";
272 pinctrl-0 = <&can0_pins>;
273 pinctrl-names = "default";
279 pinctrl-0 = <&sdhi0_pins>;
280 pinctrl-names = "default";
282 vmmc-supply = <&vcc_sdhi0>;
283 cd-gpios = <&gpio11 11 GPIO_ACTIVE_LOW>;
289 clock-frequency = <400000>;
294 interrupt-parent = <&irqc>;
297 adi,input-depth = <8>;
298 adi,input-colorspace = "rgb";
299 adi,input-clock = "1x";
302 #address-cells = <1>;
303 #size-cells = <0>;
308 remote-endpoint = <&du_out_rgb0>;
315 remote-endpoint = <&hdmi_con>;
328 pinctrl-names = "default";
329 pinctrl-0 = <&pmic_irq_pins>;
330 interrupt-parent = <&irqc>;
332 interrupt-controller;
335 compatible = "dlg,da9063-rtc";
339 compatible = "dlg,da9063-watchdog";
345 pinctrl-0 = <&du0_pins>, <&du1_pins>;
346 pinctrl-names = "default";
349 clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
355 remote-endpoint = <&adv7511_in>;
360 remote-endpoint = <&adv7123_in>;