Lines Matching +full:pm8921 +full:- +full:gpio
1 // SPDX-License-Identifier: GPL-2.0
2 /dts-v1/;
4 #include <dt-bindings/interrupt-controller/arm-gic.h>
5 #include <dt-bindings/clock/qcom,gcc-msm8960.h>
6 #include <dt-bindings/clock/qcom,lcc-msm8960.h>
7 #include <dt-bindings/mfd/qcom-rpm.h>
8 #include <dt-bindings/soc/qcom,gsbi.h>
11 #address-cells = <1>;
12 #size-cells = <1>;
15 interrupt-parent = <&intc>;
18 #address-cells = <1>;
19 #size-cells = <0>;
24 enable-method = "qcom,kpss-acc-v1";
27 next-level-cache = <&L2>;
34 enable-method = "qcom,kpss-acc-v1";
37 next-level-cache = <&L2>;
42 L2: l2-cache {
44 cache-level = <2>;
53 cpu-pmu {
54 compatible = "qcom,krait-pmu";
56 qcom,no-pc-write;
61 compatible = "fixed-clock";
62 #clock-cells = <0>;
63 clock-frequency = <19200000>;
64 clock-output-names = "cxo_board";
68 compatible = "fixed-clock";
69 #clock-cells = <0>;
70 clock-frequency = <27000000>;
71 clock-output-names = "pxo_board";
75 compatible = "fixed-clock";
76 #clock-cells = <0>;
77 clock-frequency = <32768>;
78 clock-output-names = "sleep_clk";
83 vsdcc_fixed: vsdcc-regulator {
84 compatible = "regulator-fixed";
85 regulator-name = "SDCC Power";
86 regulator-min-microvolt = <2700000>;
87 regulator-max-microvolt = <2700000>;
88 regulator-always-on;
92 #address-cells = <1>;
93 #size-cells = <1>;
95 compatible = "simple-bus";
97 intc: interrupt-controller@2000000 {
98 compatible = "qcom,msm-qgic2";
99 interrupt-controller;
100 #interrupt-cells = <3>;
106 compatible = "qcom,kpss-timer",
107 "qcom,kpss-wdt-msm8960", "qcom,msm-timer";
112 clock-frequency = <27000000>,
114 cpu-offset = <0x80000>;
118 compatible = "qcom,msm8960-pinctrl";
119 gpio-controller;
120 gpio-ranges = <&msmgpio 0 0 152>;
121 #gpio-cells = <2>;
123 interrupt-controller;
124 #interrupt-cells = <2>;
128 gcc: clock-controller@900000 {
129 compatible = "qcom,gcc-msm8960";
130 #clock-cells = <1>;
131 #power-domain-cells = <1>;
132 #reset-cells = <1>;
137 clock-names = "cxo", "pxo", "pll4";
140 lcc: clock-controller@28000000 {
141 compatible = "qcom,lcc-msm8960";
143 #clock-cells = <1>;
144 #reset-cells = <1>;
151 clock-names = "pxo",
161 clock-controller@4000000 {
162 compatible = "qcom,mmcc-msm8960";
164 #clock-cells = <1>;
165 #power-domain-cells = <1>;
166 #reset-cells = <1>;
175 clock-names = "pxo",
185 l2cc: clock-controller@2011000 {
186 compatible = "qcom,kpss-gcc", "syscon";
191 compatible = "qcom,rpm-msm8960";
198 interrupt-names = "ack", "err", "wakeup";
201 compatible = "qcom,rpm-pm8921-regulators";
205 acc0: clock-controller@2088000 {
206 compatible = "qcom,kpss-acc-v1";
210 acc1: clock-controller@2098000 {
211 compatible = "qcom,kpss-acc-v1";
228 compatible = "qcom,gsbi-v1.0.0";
229 cell-index = <5>;
232 clock-names = "iface";
233 #address-cells = <1>;
234 #size-cells = <1>;
237 syscon-tcsr = <&tcsr>;
240 compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
245 clock-names = "core", "iface";
253 qcom,controller-type = "pmic-arbiter";
256 compatible = "qcom,pm8921";
257 interrupt-parent = <&msmgpio>;
259 #interrupt-cells = <2>;
260 interrupt-controller;
261 #address-cells = <1>;
262 #size-cells = <0>;
265 compatible = "qcom,pm8921-pwrkey";
267 interrupt-parent = <&pmicintc>;
270 pull-up;
274 compatible = "qcom,pm8921-keypad";
276 interrupt-parent = <&pmicintc>;
279 scan-delay = <32>;
280 row-hold = <91500>;
284 compatible = "qcom,pm8921-rtc";
285 interrupt-parent = <&pmicintc>;
288 allow-set-time;
297 clock-names = "core";
301 compatible = "simple-bus";
302 #address-cells = <1>;
303 #size-cells = <1>;
308 arm,primecell-periphid = <0x00051180>;
311 interrupt-names = "cmd_irq";
313 clock-names = "mclk", "apb_pclk";
314 bus-width = <8>;
315 max-frequency = <96000000>;
316 non-removable;
317 cap-sd-highspeed;
318 cap-mmc-highspeed;
319 vmmc-supply = <&vsdcc_fixed>;
324 arm,primecell-periphid = <0x00051180>;
328 interrupt-names = "cmd_irq";
330 clock-names = "mclk", "apb_pclk";
331 bus-width = <4>;
332 cap-sd-highspeed;
333 cap-mmc-highspeed;
334 max-frequency = <192000000>;
335 no-1-8-v;
336 vmmc-supply = <&vsdcc_fixed>;
341 compatible = "qcom,tcsr-msm8960", "syscon";
346 compatible = "qcom,gsbi-v1.0.0";
347 cell-index = <1>;
350 clock-names = "iface";
351 #address-cells = <1>;
352 #size-cells = <1>;
356 compatible = "qcom,spi-qup-v1.1.1";
357 #address-cells = <1>;
358 #size-cells = <0>;
361 spi-max-frequency = <24000000>;
362 cs-gpios = <&msmgpio 8 0>;
365 clock-names = "core", "iface";