Lines Matching +full:- +full:microvolt
1 // SPDX-License-Identifier: GPL-2.0
2 #include <dt-bindings/gpio/gpio.h>
3 #include "qcom-msm8974.dtsi"
4 #include "qcom-pm8841.dtsi"
5 #include "qcom-pm8941.dtsi"
9 compatible = "qcom,apq8074-dragonboard", "qcom,apq8074";
18 stdout-path = "serial0:115200n8";
28 clock-frequency = <200000>;
34 read-only;
42 phy-select = <&tcsr 0xb000 1>;
44 vbus-supply = <&chg_otg>;
45 hnp-disable;
46 srp-disable;
47 adp-disable;
52 v3p3-supply = <&pm8941_l24>;
53 v1p8-supply = <&pm8941_l6>;
55 qcom,init-seq = /bits/ 8 <0x1 0x63>;
61 pm8841-regulators {
62 compatible = "qcom,rpm-pm8841-regulators";
65 regulator-min-microvolt = <675000>;
66 regulator-max-microvolt = <1050000>;
70 regulator-min-microvolt = <500000>;
71 regulator-max-microvolt = <1050000>;
75 regulator-min-microvolt = <500000>;
76 regulator-max-microvolt = <1050000>;
80 regulator-min-microvolt = <500000>;
81 regulator-max-microvolt = <1050000>;
85 pm8941-regulators {
86 compatible = "qcom,rpm-pm8941-regulators";
88 vdd_l1_l3-supply = <&pm8941_s1>;
89 vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
90 vdd_l4_l11-supply = <&pm8941_s1>;
91 vdd_l5_l7-supply = <&pm8941_s2>;
92 vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
93 vin_5vs-supply = <&pm8941_5v>;
96 regulator-min-microvolt = <1300000>;
97 regulator-max-microvolt = <1300000>;
98 regulator-always-on;
99 regulator-boot-on;
103 regulator-min-microvolt = <2150000>;
104 regulator-max-microvolt = <2150000>;
105 regulator-boot-on;
109 regulator-min-microvolt = <1800000>;
110 regulator-max-microvolt = <1800000>;
111 regulator-always-on;
112 regulator-boot-on;
116 regulator-min-microvolt = <1225000>;
117 regulator-max-microvolt = <1225000>;
118 regulator-always-on;
119 regulator-boot-on;
123 regulator-min-microvolt = <1200000>;
124 regulator-max-microvolt = <1200000>;
128 regulator-min-microvolt = <1225000>;
129 regulator-max-microvolt = <1225000>;
133 regulator-min-microvolt = <1225000>;
134 regulator-max-microvolt = <1225000>;
138 regulator-min-microvolt = <1800000>;
139 regulator-max-microvolt = <1800000>;
143 regulator-min-microvolt = <1800000>;
144 regulator-max-microvolt = <1800000>;
145 regulator-boot-on;
149 regulator-min-microvolt = <1800000>;
150 regulator-max-microvolt = <1800000>;
151 regulator-boot-on;
155 regulator-min-microvolt = <1800000>;
156 regulator-max-microvolt = <1800000>;
160 regulator-min-microvolt = <1800000>;
161 regulator-max-microvolt = <2950000>;
165 regulator-min-microvolt = <1800000>;
166 regulator-max-microvolt = <1800000>;
167 regulator-always-on;
171 regulator-min-microvolt = <1300000>;
172 regulator-max-microvolt = <1300000>;
176 regulator-min-microvolt = <1800000>;
177 regulator-max-microvolt = <1800000>;
178 regulator-always-on;
179 regulator-boot-on;
183 regulator-min-microvolt = <1800000>;
184 regulator-max-microvolt = <2950000>;
185 regulator-boot-on;
189 regulator-min-microvolt = <1800000>;
190 regulator-max-microvolt = <1800000>;
194 regulator-min-microvolt = <2050000>;
195 regulator-max-microvolt = <2050000>;
199 regulator-min-microvolt = <2700000>;
200 regulator-max-microvolt = <2700000>;
204 regulator-min-microvolt = <2700000>;
205 regulator-max-microvolt = <2700000>;
209 regulator-min-microvolt = <2850000>;
210 regulator-max-microvolt = <2850000>;
214 regulator-min-microvolt = <3300000>;
215 regulator-max-microvolt = <3300000>;
216 regulator-always-on;
220 regulator-min-microvolt = <2950000>;
221 regulator-max-microvolt = <2950000>;
222 regulator-system-load = <200000>;
223 regulator-allow-set-load;
224 regulator-boot-on;
228 regulator-min-microvolt = <2950000>;
229 regulator-max-microvolt = <2950000>;
230 regulator-boot-on;
234 regulator-min-microvolt = <3000000>;
235 regulator-max-microvolt = <3000000>;
239 regulator-min-microvolt = <3000000>;
240 regulator-max-microvolt = <3000000>;
244 regulator-min-microvolt = <3075000>;
245 regulator-max-microvolt = <3075000>;
246 regulator-boot-on;
254 vmmc-supply = <&pm8941_l20>;
255 vqmmc-supply = <&pm8941_s3>;
257 pinctrl-names = "default", "sleep";
258 pinctrl-0 = <&sdc1_on>;
259 pinctrl-1 = <&sdc1_off>;
265 cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
266 vmmc-supply = <&pm8941_l21>;
267 vqmmc-supply = <&pm8941_l13>;
269 pinctrl-names = "default", "sleep";
270 pinctrl-0 = <&sdc2_on>;
271 pinctrl-1 = <&sdc2_off>;
275 sdc1_on: sdc1-on {
278 drive-strength = <16>;
279 bias-disable;
282 cmd-data {
284 drive-strength = <10>;
285 bias-pull-up;
289 sdc2_on: sdc2-on {
292 drive-strength = <10>;
293 bias-disable;
296 cmd-data {
298 drive-strength = <6>;
299 bias-pull-up;
305 drive-strength = <2>;
306 bias-disable;