Lines Matching +full:power +full:- +full:gpios
1 // SPDX-License-Identifier: GPL-2.0
3 #include "kirkwood-6281.dtsi"
8 stdout-path = &uart0;
12 pinctrl: pin-controller@10000 {
13 /* Non-default UART pins */
14 pmx_uart0: pmx-uart0 {
18 pmx_power_hdd: pmx-power-hdd {
22 pmx_usb_vbus: pmx-usb-vbus {
26 pmx_fan_high: pmx-fan-high {
30 pmx_fan_low: pmx-fan-low {
34 pmx_led_function_blue: pmx-led-function-blue {
38 pmx_led_alarm: pmx-led-alarm {
42 pmx_led_info: pmx-led-info {
46 pmx_led_power: pmx-led-power {
50 pmx_fan_lock: pmx-fan-lock {
54 pmx_button_function: pmx-button-function {
58 pmx_power_switch: pmx-power-switch {
62 pmx_power_auto_switch: pmx-power-auto-switch {
66 pmx_led_function_red: pmx-led-function_red {
74 nr-ports = <1>;
81 #address-cells = <1>;
82 #size-cells = <1>;
83 compatible = "m25p40", "jedec,spi-nor";
85 spi-max-frequency = <25000000>;
91 read-only;
97 read-only;
109 compatible = "gpio-keys";
110 #address-cells = <1>;
111 #size-cells = <0>;
112 pinctrl-0 = <&pmx_button_function &pmx_power_switch
114 pinctrl-names = "default";
119 gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
122 label = "Power-on Switch";
124 linux,input-type = <5>;
125 gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
127 power {
128 label = "Power-auto Switch";
130 linux,input-type = <5>;
131 gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
136 compatible = "gpio-leds";
137 pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm
140 pinctrl-names = "default";
144 gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
149 gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
154 gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
157 power {
158 label = "lsxl:blue:power";
159 gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
160 default-state = "keep";
165 gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
170 compatible = "gpio-fan";
171 pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
172 pinctrl-names = "default";
173 gpios = <&gpio0 19 GPIO_ACTIVE_LOW
175 gpio-fan,speed-map = <0 3
179 alarm-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
183 compatible = "restart-poweroff";
187 compatible = "simple-bus";
188 #address-cells = <1>;
189 #size-cells = <0>;
190 pinctrl-0 = <&pmx_power_hdd &pmx_usb_vbus>;
191 pinctrl-names = "default";
194 compatible = "regulator-fixed";
196 regulator-name = "USB Power";
197 regulator-min-microvolt = <5000000>;
198 regulator-max-microvolt = <5000000>;
199 enable-active-high;
200 regulator-always-on;
201 regulator-boot-on;
205 compatible = "regulator-fixed";
207 regulator-name = "HDD Power";
208 regulator-min-microvolt = <5000000>;
209 regulator-max-microvolt = <5000000>;
210 enable-active-high;
211 regulator-always-on;
212 regulator-boot-on;
221 ethphy1: ethernet-phy@8 {
228 ethernet1-port@0 {
229 phy-handle = <ðphy1>;