Lines Matching +full:- +full:- +full:pfuze200
1 // SPDX-License-Identifier: GPL-2.0 OR X11
3 * Device Tree Include file for TQ-Systems TQMa7x boards with full mounted PCB.
5 * Copyright (C) 2016 TQ-Systems GmbH
6 * Author: Markus Niebel <Markus.Niebel@tq-group.com>
13 /* 512 MB - default configuration */
19 cpu-supply = <&sw1a_reg>;
24 qspi-reset-hog {
25 gpio-hog;
28 line-name = "qspi-reset";
33 pinctrl-names = "default";
34 pinctrl-0 = <&pinctrl_i2c1>;
35 clock-frequency = <100000>;
39 pinctrl-names = "default";
40 pinctrl-0 = <&pinctrl_pmic1>;
46 regulator-min-microvolt = <700000>;
47 regulator-max-microvolt = <3300000>;
48 regulator-boot-on;
49 regulator-always-on;
50 regulator-ramp-delay = <6250>;
53 /* use sw1c_reg to align with pfuze100/pfuze200 */
55 regulator-min-microvolt = <700000>;
56 regulator-max-microvolt = <1475000>;
57 regulator-boot-on;
58 regulator-always-on;
59 regulator-ramp-delay = <6250>;
63 regulator-min-microvolt = <1500000>;
64 regulator-max-microvolt = <1850000>;
65 regulator-boot-on;
66 regulator-always-on;
70 regulator-min-microvolt = <900000>;
71 regulator-max-microvolt = <1650000>;
72 regulator-boot-on;
73 regulator-always-on;
77 regulator-min-microvolt = <5000000>;
78 regulator-max-microvolt = <5150000>;
82 regulator-min-microvolt = <1000000>;
83 regulator-max-microvolt = <3000000>;
84 regulator-boot-on;
85 regulator-always-on;
89 regulator-boot-on;
90 regulator-always-on;
94 regulator-min-microvolt = <1800000>;
95 regulator-max-microvolt = <3300000>;
96 regulator-always-on;
100 regulator-min-microvolt = <800000>;
101 regulator-max-microvolt = <1550000>;
102 regulator-always-on;
106 regulator-min-microvolt = <2850000>;
107 regulator-max-microvolt = <3300000>;
108 regulator-always-on;
112 regulator-min-microvolt = <2850000>;
113 regulator-max-microvolt = <3300000>;
114 regulator-always-on;
118 regulator-min-microvolt = <1800000>;
119 regulator-max-microvolt = <3300000>;
120 regulator-always-on;
124 regulator-min-microvolt = <1800000>;
125 regulator-max-microvolt = <3300000>;
126 regulator-always-on;
132 se97b: temperature-sensor-eeprom@1e {
133 compatible = "nxp,se97b", "jedec,jc-42.4-temp";
250 pinctrl-names = "default";
251 pinctrl-0 = <&pinctrl_qspi &pinctrl_qspi_reset>;
255 compatible = "jedec,spi-nor";
257 spi-max-frequency = <29000000>;
258 spi-rx-bus-width = <4>;
259 spi-tx-bus-width = <4>;
268 pinctrl-names = "default", "state_100mhz", "state_200mhz";
269 pinctrl-0 = <&pinctrl_usdhc3>;
270 pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
271 pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
272 assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
273 assigned-clock-rates = <400000000>;
274 bus-width = <8>;
275 non-removable;
276 vmmc-supply = <&vgen4_reg>;
277 vqmmc-supply = <&sw2_reg>;
282 pinctrl-names = "default";
283 pinctrl-0 = <&pinctrl_wdog1>;
287 * X1-51 (WDOG1#) signal needs carrier board handling to reset
288 * TQMa7 on X1-22 (RESET_IN#).
290 fsl,ext-reset-output;