Lines Matching +full:micvdd +full:- +full:supply
1 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
4 * Copyright 2017-2018 NXP.
8 /dts-v1/;
10 #include <dt-bindings/gpio/gpio.h>
11 #include <dt-bindings/input/input.h>
16 compatible = "fsl,imx6sll-evk", "fsl,imx6sll";
19 stdout-path = &uart1;
27 backlight_display: backlight-display {
28 compatible = "pwm-backlight";
30 brightness-levels = <0 4 8 16 32 64 128 255>;
31 default-brightness-level = <6>;
36 compatible = "gpio-leds";
37 pinctrl-names = "default";
38 pinctrl-0 = <&pinctrl_led>;
43 linux,default-trigger = "heartbeat";
47 reg_usb_otg1_vbus: regulator-otg1-vbus {
48 compatible = "regulator-fixed";
49 pinctrl-names = "default";
50 pinctrl-0 = <&pinctrl_usb_otg1_vbus>;
51 regulator-name = "usb_otg1_vbus";
52 regulator-min-microvolt = <5000000>;
53 regulator-max-microvolt = <5000000>;
55 enable-active-high;
58 reg_usb_otg2_vbus: regulator-otg2-vbus {
59 compatible = "regulator-fixed";
60 pinctrl-names = "default";
61 pinctrl-0 = <&pinctrl_usb_otg2_vbus>;
62 regulator-name = "usb_otg2_vbus";
63 regulator-min-microvolt = <5000000>;
64 regulator-max-microvolt = <5000000>;
66 enable-active-high;
69 reg_aud3v: regulator-aud3v {
70 compatible = "regulator-fixed";
71 regulator-name = "wm8962-supply-3v15";
72 regulator-min-microvolt = <3150000>;
73 regulator-max-microvolt = <3150000>;
74 regulator-boot-on;
77 reg_aud4v: regulator-aud4v {
78 compatible = "regulator-fixed";
79 regulator-name = "wm8962-supply-4v2";
80 regulator-min-microvolt = <4325000>;
81 regulator-max-microvolt = <4325000>;
82 regulator-boot-on;
85 reg_lcd_3v3: regulator-lcd-3v3 {
86 compatible = "regulator-fixed";
87 pinctrl-names = "default";
88 pinctrl-0 = <&pinctrl_reg_lcd_3v3>;
89 regulator-name = "lcd-3v3";
91 enable-active-high;
94 reg_lcd_5v: regulator-lcd-5v {
95 compatible = "regulator-fixed";
96 regulator-name = "lcd-5v0";
97 regulator-min-microvolt = <5000000>;
98 regulator-max-microvolt = <5000000>;
101 reg_sd1_vmmc: regulator-sd1-vmmc {
102 compatible = "regulator-fixed";
103 pinctrl-names = "default";
104 pinctrl-0 = <&pinctrl_reg_sd1_vmmc>;
105 regulator-name = "SD1_SPWR";
106 regulator-min-microvolt = <3000000>;
107 regulator-max-microvolt = <3000000>;
109 enable-active-high;
112 reg_sd3_vmmc: regulator-sd3-vmmc {
113 compatible = "regulator-fixed";
114 pinctrl-names = "default";
115 pinctrl-0 = <&pinctrl_reg_sd3_vmmc>;
116 regulator-name = "SD3_WIFI";
117 regulator-min-microvolt = <3000000>;
118 regulator-max-microvolt = <3000000>;
120 enable-active-high;
126 dvdd-supply = <®_lcd_3v3>;
127 avdd-supply = <®_lcd_5v>;
131 remote-endpoint = <&display_out>;
137 compatible = "fsl,imx6sl-evk-wm8962", "fsl,imx-audio-wm8962";
138 pinctrl-names = "default";
139 pinctrl-0 = <&pinctrl_hp>;
140 model = "wm8962-audio";
141 audio-cpu = <&ssi2>;
142 audio-codec = <&wm8962>;
143 audio-routing =
150 mux-int-port = <2>;
151 mux-ext-port = <3>;
152 hp-det-gpio = <&gpio4 24 GPIO_ACTIVE_LOW>;
157 pinctrl-names = "default";
158 pinctrl-0 = <&pinctrl_audmux3>;
163 arm-supply = <&sw1a_reg>;
164 soc-supply = <&sw1c_reg>;
168 clock-frequency = <100000>;
169 pinctrl-names = "default";
170 pinctrl-0 = <&pinctrl_i2c1>;
179 regulator-min-microvolt = <300000>;
180 regulator-max-microvolt = <1875000>;
181 regulator-boot-on;
182 regulator-always-on;
183 regulator-ramp-delay = <6250>;
187 regulator-min-microvolt = <300000>;
188 regulator-max-microvolt = <1875000>;
189 regulator-boot-on;
190 regulator-always-on;
191 regulator-ramp-delay = <6250>;
195 regulator-min-microvolt = <800000>;
196 regulator-max-microvolt = <3300000>;
197 regulator-boot-on;
198 regulator-always-on;
202 regulator-min-microvolt = <400000>;
203 regulator-max-microvolt = <1975000>;
204 regulator-boot-on;
205 regulator-always-on;
209 regulator-min-microvolt = <400000>;
210 regulator-max-microvolt = <1975000>;
211 regulator-boot-on;
212 regulator-always-on;
216 regulator-min-microvolt = <800000>;
217 regulator-max-microvolt = <3300000>;
218 regulator-always-on;
222 regulator-min-microvolt = <5000000>;
223 regulator-max-microvolt = <5150000>;
227 regulator-min-microvolt = <1000000>;
228 regulator-max-microvolt = <3000000>;
229 regulator-boot-on;
230 regulator-always-on;
234 regulator-boot-on;
235 regulator-always-on;
239 regulator-min-microvolt = <800000>;
240 regulator-max-microvolt = <1550000>;
241 regulator-always-on;
245 regulator-min-microvolt = <800000>;
246 regulator-max-microvolt = <1550000>;
250 regulator-min-microvolt = <1800000>;
251 regulator-max-microvolt = <3300000>;
255 regulator-min-microvolt = <1800000>;
256 regulator-max-microvolt = <3300000>;
257 regulator-always-on;
261 regulator-min-microvolt = <1800000>;
262 regulator-max-microvolt = <3300000>;
263 regulator-always-on;
267 regulator-min-microvolt = <1800000>;
268 regulator-max-microvolt = <3300000>;
269 regulator-always-on;
276 clock-frequency = <100000>;
277 pinctrl-names = "default";
278 pinctrl-0 = <&pinctrl_i2c3>;
281 wm8962: audio-codec@1a {
285 DCVDD-supply = <&vgen3_reg>;
286 DBVDD-supply = <®_aud3v>;
287 AVDD-supply = <&vgen3_reg>;
288 CPVDD-supply = <&vgen3_reg>;
289 MICVDD-supply = <®_aud3v>;
290 PLLVDD-supply = <&vgen3_reg>;
291 SPKVDD1-supply = <®_aud4v>;
292 SPKVDD2-supply = <®_aud4v>;
297 pinctrl-names = "default";
298 pinctrl-0 = <&pinctrl_lcd>;
303 remote-endpoint = <&panel_in>;
309 #pwm-cells = <2>;
310 pinctrl-names = "default";
311 pinctrl-0 = <&pinctrl_pwm1>;
328 pinctrl-names = "default";
329 pinctrl-0 = <&pinctrl_uart1>;
334 pinctrl-names = "default", "state_100mhz", "state_200mhz";
335 pinctrl-0 = <&pinctrl_usdhc1>;
336 pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
337 pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
338 cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
339 wp-gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
340 keep-power-in-suspend;
341 wakeup-source;
342 vmmc-supply = <®_sd1_vmmc>;
347 vbus-supply = <®_usb_otg1_vbus>;
348 pinctrl-names = "default";
349 pinctrl-0 = <&pinctrl_usbotg1>;
350 disable-over-current;
351 srp-disable;
352 hnp-disable;
353 adp-disable;
358 vbus-supply = <®_usb_otg2_vbus>;
360 disable-over-current;
365 pinctrl-names = "default", "state_100mhz", "state_200mhz";
366 pinctrl-0 = <&pinctrl_usdhc3>;
367 pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
368 pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
369 cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
370 keep-power-in-suspend;
371 wakeup-source;
372 vmmc-supply = <®_sd3_vmmc>;
377 pinctrl-names = "default";
378 pinctrl-0 = <&pinctrl_wdog1>;
379 fsl,ext-reset-output;