Lines Matching +full:skew +full:- +full:delay
1 // SPDX-License-Identifier: GPL-2.0 OR X11
7 #include <dt-bindings/gpio/gpio.h>
8 #include <dt-bindings/input/input.h>
12 stdout-path = &uart2;
21 compatible = "simple-bus";
22 #address-cells = <1>;
23 #size-cells = <0>;
26 compatible = "regulator-fixed";
28 regulator-name = "2P5V";
29 regulator-min-microvolt = <2500000>;
30 regulator-max-microvolt = <2500000>;
31 regulator-always-on;
35 compatible = "regulator-fixed";
37 regulator-name = "3P3V";
38 regulator-min-microvolt = <3300000>;
39 regulator-max-microvolt = <3300000>;
40 regulator-always-on;
44 compatible = "regulator-fixed";
46 regulator-name = "usb_otg_vbus";
47 regulator-min-microvolt = <5000000>;
48 regulator-max-microvolt = <5000000>;
50 enable-active-high;
54 compatible = "regulator-fixed";
56 regulator-name = "CAN XCVR";
57 regulator-min-microvolt = <3300000>;
58 regulator-max-microvolt = <3300000>;
59 pinctrl-names = "default";
60 pinctrl-0 = <&pinctrl_can_xcvr>;
65 compatible = "regulator-fixed";
67 pinctrl-names = "default";
68 pinctrl-0 = <&pinctrl_wlan_vmmc>;
69 regulator-name = "reg_wlan_vmmc";
70 regulator-min-microvolt = <3300000>;
71 regulator-max-microvolt = <3300000>;
73 startup-delay-us = <70000>;
74 enable-active-high;
78 compatible = "regulator-fixed";
80 pinctrl-names = "default";
81 pinctrl-0 = <&pinctrl_usbh1>;
82 regulator-name = "usb_h1_vbus";
83 regulator-min-microvolt = <3300000>;
84 regulator-max-microvolt = <3300000>;
86 enable-active-high;
90 gpio-keys {
91 compatible = "gpio-keys";
92 pinctrl-names = "default";
93 pinctrl-0 = <&pinctrl_gpio_keys>;
99 wakeup-source;
120 volume-up {
126 volume-down {
134 compatible = "fsl,imx6q-nitrogen6x-sgtl5000",
135 "fsl,imx-audio-sgtl5000";
136 model = "imx6q-nitrogen6x-sgtl5000";
137 ssi-controller = <&ssi1>;
138 audio-codec = <&codec>;
139 audio-routing =
143 mux-int-port = <1>;
144 mux-ext-port = <3>;
147 backlight_lcd: backlight-lcd {
148 compatible = "pwm-backlight";
150 brightness-levels = <0 4 8 16 32 64 128 255>;
151 default-brightness-level = <7>;
152 power-supply = <®_3p3v>;
156 backlight_lvds: backlight-lvds {
157 compatible = "pwm-backlight";
159 brightness-levels = <0 4 8 16 32 64 128 255>;
160 default-brightness-level = <7>;
161 power-supply = <®_3p3v>;
166 compatible = "fsl,imx-parallel-display";
167 #address-cells = <1>;
168 #size-cells = <0>;
169 interface-pix-fmt = "bgr666";
170 pinctrl-names = "default";
171 pinctrl-0 = <&pinctrl_j15>;
178 remote-endpoint = <&ipu1_di0_disp0>;
186 remote-endpoint = <&lcd_panel_in>;
191 panel-lcd {
192 compatible = "okaya,rs800480t-7x0gp";
197 remote-endpoint = <&lcd_display_out>;
202 panel-lvds0 {
208 remote-endpoint = <&lvds0_out>;
215 pinctrl-names = "default";
216 pinctrl-0 = <&pinctrl_audmux>;
221 pinctrl-names = "default";
222 pinctrl-0 = <&pinctrl_can1>;
223 xceiver-supply = <®_can_xcvr>;
228 assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
230 assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
235 cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
236 pinctrl-names = "default";
237 pinctrl-0 = <&pinctrl_ecspi1>;
241 compatible = "sst,sst25vf016b", "jedec,spi-nor";
242 spi-max-frequency = <20000000>;
244 #address-cells = <1>;
245 #size-cells = <1>;
265 pinctrl-names = "default";
266 pinctrl-0 = <&pinctrl_enet>;
267 phy-mode = "rgmii";
268 phy-handle = <ðphy>;
269 phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
270 /delete-property/ interrupts;
271 interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
273 fsl,err006687-workaround-present;
277 #address-cells = <1>;
278 #size-cells = <0>;
280 ethphy: ethernet-phy {
281 compatible = "ethernet-phy-ieee802.3-c22";
282 txen-skew-ps = <0>;
283 txc-skew-ps = <3000>;
284 rxdv-skew-ps = <0>;
285 rxc-skew-ps = <3000>;
286 rxd0-skew-ps = <0>;
287 rxd1-skew-ps = <0>;
288 rxd2-skew-ps = <0>;
289 rxd3-skew-ps = <0>;
290 txd0-skew-ps = <0>;
291 txd1-skew-ps = <0>;
292 txd2-skew-ps = <0>;
293 txd3-skew-ps = <0>;
299 ddc-i2c-bus = <&i2c2>;
304 clock-frequency = <100000>;
305 pinctrl-names = "default";
306 pinctrl-0 = <&pinctrl_i2c1>;
313 VDDA-supply = <®_2p5v>;
314 VDDIO-supply = <®_3p3v>;
324 clock-frequency = <100000>;
325 pinctrl-names = "default";
326 pinctrl-0 = <&pinctrl_i2c2>;
331 clock-frequency = <100000>;
332 pinctrl-names = "default";
333 pinctrl-0 = <&pinctrl_i2c3>;
339 interrupt-parent = <&gpio1>;
341 wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
345 compatible = "edt,edt-ft5x06";
347 interrupt-parent = <&gpio1>;
349 wakeup-source;
354 pinctrl-names = "default";
355 pinctrl-0 = <&pinctrl_hog>;
357 imx6q-nitrogen6x {
382 pinctrl_can_xcvr: can-xcvrgrp {
421 pinctrl_gpio_keys: gpio-keysgrp {
574 pinctrl_wlan_vmmc: wlan-vmmcgrp {
586 remote-endpoint = <&lcd_display_in>;
592 lvds-channel@0 {
599 remote-endpoint = <&panel_in>;
610 #pwm-cells = <2>;
611 pinctrl-names = "default";
612 pinctrl-0 = <&pinctrl_pwm1>;
617 pinctrl-names = "default";
618 pinctrl-0 = <&pinctrl_pwm3>;
623 #pwm-cells = <2>;
624 pinctrl-names = "default";
625 pinctrl-0 = <&pinctrl_pwm4>;
634 pinctrl-names = "default";
635 pinctrl-0 = <&pinctrl_uart1>;
640 pinctrl-names = "default";
641 pinctrl-0 = <&pinctrl_uart2>;
646 vbus-supply = <®_usb_h1_vbus>;
651 vbus-supply = <®_usb_otg_vbus>;
652 pinctrl-names = "default";
653 pinctrl-0 = <&pinctrl_usbotg>;
654 disable-over-current;
659 pinctrl-names = "default";
660 pinctrl-0 = <&pinctrl_usdhc2>;
661 bus-width = <4>;
662 non-removable;
663 vmmc-supply = <®_wlan_vmmc>;
664 cap-power-off-card;
665 keep-power-in-suspend;
668 #address-cells = <1>;
669 #size-cells = <0>;
673 interrupt-parent = <&gpio6>;
675 ref-clock-frequency = <38400000>;
680 pinctrl-names = "default";
681 pinctrl-0 = <&pinctrl_usdhc3>;
682 cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
683 vmmc-supply = <®_3p3v>;
688 pinctrl-names = "default";
689 pinctrl-0 = <&pinctrl_usdhc4>;
690 cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
691 vmmc-supply = <®_3p3v>;