Lines Matching +full:edt +full:- +full:ft5x06
1 // SPDX-License-Identifier: GPL-2.0 OR X11
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
10 stdout-path = &uart2;
18 backlight_lcd: backlight-lcd {
19 compatible = "pwm-backlight";
21 brightness-levels = <0 4 8 16 32 64 128 255>;
22 default-brightness-level = <7>;
23 power-supply = <®_3p3v>;
27 backlight_lvds0: backlight-lvds0 {
28 compatible = "pwm-backlight";
30 brightness-levels = <0 4 8 16 32 64 128 255>;
31 default-brightness-level = <7>;
32 power-supply = <®_3p3v>;
36 backlight_lvds1: backlight-lvds1 {
37 compatible = "gpio-backlight";
38 pinctrl-names = "default";
39 pinctrl-0 = <&pinctrl_backlight_lvds1>;
41 default-on;
45 gpio-keys {
46 compatible = "gpio-keys";
47 pinctrl-names = "default";
48 pinctrl-0 = <&pinctrl_gpio_keys>;
54 wakeup-source;
75 volume-up {
81 volume-down {
89 compatible = "fsl,imx-parallel-display";
90 #address-cells = <1>;
91 #size-cells = <0>;
92 interface-pix-fmt = "bgr666";
93 pinctrl-names = "default";
94 pinctrl-0 = <&pinctrl_j15>;
101 remote-endpoint = <&ipu1_di0_disp0>;
109 remote-endpoint = <&lcd_panel_in>;
114 panel-lcd {
115 compatible = "okaya,rs800480t-7x0gp";
120 remote-endpoint = <&lcd_display_out>;
125 panel-lvds0 {
131 remote-endpoint = <&lvds0_out>;
136 panel-lvds1 {
142 remote-endpoint = <&lvds1_out>;
147 reg_1p8v: regulator-1v8 {
148 compatible = "regulator-fixed";
149 regulator-name = "1P8V";
150 regulator-min-microvolt = <1800000>;
151 regulator-max-microvolt = <1800000>;
152 regulator-always-on;
155 reg_2p5v: regulator-2v5 {
156 compatible = "regulator-fixed";
157 regulator-name = "2P5V";
158 regulator-min-microvolt = <2500000>;
159 regulator-max-microvolt = <2500000>;
160 regulator-always-on;
163 reg_3p3v: regulator-3v3 {
164 compatible = "regulator-fixed";
165 regulator-name = "3P3V";
166 regulator-min-microvolt = <3300000>;
167 regulator-max-microvolt = <3300000>;
168 regulator-always-on;
171 reg_can_xcvr: regulator-can-xcvr {
172 compatible = "regulator-fixed";
173 regulator-name = "CAN XCVR";
174 regulator-min-microvolt = <3300000>;
175 regulator-max-microvolt = <3300000>;
176 pinctrl-names = "default";
177 pinctrl-0 = <&pinctrl_can_xcvr>;
181 reg_usb_h1_vbus: regulator-usb-h1-vbus {
182 compatible = "regulator-fixed";
183 pinctrl-names = "default";
184 pinctrl-0 = <&pinctrl_usbh1>;
185 regulator-name = "usb_h1_vbus";
186 regulator-min-microvolt = <3300000>;
187 regulator-max-microvolt = <3300000>;
189 enable-active-high;
190 regulator-always-on;
193 reg_usb_otg_vbus: regulator-usb-otg-vbus {
194 compatible = "regulator-fixed";
195 regulator-name = "usb_otg_vbus";
196 regulator-min-microvolt = <5000000>;
197 regulator-max-microvolt = <5000000>;
199 enable-active-high;
202 reg_wlan_vmmc: regulator-wlan-vmmc {
203 compatible = "regulator-fixed";
204 pinctrl-names = "default";
205 pinctrl-0 = <&pinctrl_wlan_vmmc>;
206 regulator-name = "reg_wlan_vmmc";
207 regulator-min-microvolt = <3300000>;
208 regulator-max-microvolt = <3300000>;
210 startup-delay-us = <70000>;
211 enable-active-high;
215 compatible = "fsl,imx6q-nitrogen6_som2-sgtl5000",
216 "fsl,imx-audio-sgtl5000";
217 model = "imx6q-nitrogen6_som2-sgtl5000";
218 ssi-controller = <&ssi1>;
219 audio-codec = <&codec>;
220 audio-routing =
224 mux-int-port = <1>;
225 mux-ext-port = <3>;
230 pinctrl-names = "default";
231 pinctrl-0 = <&pinctrl_audmux>;
236 pinctrl-names = "default";
237 pinctrl-0 = <&pinctrl_can1>;
238 xceiver-supply = <®_can_xcvr>;
243 assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
245 assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
250 cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
251 pinctrl-names = "default";
252 pinctrl-0 = <&pinctrl_ecspi1>;
257 spi-max-frequency = <20000000>;
263 pinctrl-names = "default";
264 pinctrl-0 = <&pinctrl_enet>;
265 phy-mode = "rgmii";
266 /delete-property/ interrupts;
267 interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
269 fsl,err006687-workaround-present;
274 ddc-i2c-bus = <&i2c2>;
279 clock-frequency = <100000>;
280 pinctrl-names = "default";
281 pinctrl-0 = <&pinctrl_i2c1>;
286 pinctrl-names = "default";
287 pinctrl-0 = <&pinctrl_sgtl5000>;
290 VDDA-supply = <®_2p5v>;
291 VDDIO-supply = <®_3p3v>;
296 pinctrl-names = "default";
297 pinctrl-0 = <&pinctrl_rv4162>;
299 interrupts-extended = <&gpio6 7 IRQ_TYPE_LEVEL_LOW>;
304 clock-frequency = <100000>;
305 pinctrl-names = "default";
306 pinctrl-0 = <&pinctrl_i2c2>;
311 clock-frequency = <100000>;
312 pinctrl-names = "default";
313 pinctrl-0 = <&pinctrl_i2c3>;
319 interrupt-parent = <&gpio1>;
321 wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
325 compatible = "edt,edt-ft5x06";
327 interrupt-parent = <&gpio1>;
329 wakeup-source;
343 pinctrl_backlight_lvds1: backlight-lvds1grp {
356 pinctrl_can_xcvr: can-xcvrgrp {
395 pinctrl_gpio_keys: gpio-keysgrp {
591 pinctrl_wlan_vmmc: wlan-vmmcgrp {
602 remote-endpoint = <&lcd_display_in>;
608 lvds-channel@0 {
615 remote-endpoint = <&panel_in_lvds0>;
620 lvds-channel@1 {
621 fsl,data-mapping = "spwg";
622 fsl,data-width = <18>;
629 remote-endpoint = <&panel_in_lvds1>;
636 pinctrl-names = "default";
637 pinctrl-0 = <&pinctrl_pcie>;
638 reset-gpio = <&gpio3 0 GPIO_ACTIVE_LOW>;
643 #pwm-cells = <2>;
644 pinctrl-names = "default";
645 pinctrl-0 = <&pinctrl_pwm1>;
650 pinctrl-names = "default";
651 pinctrl-0 = <&pinctrl_pwm3>;
656 #pwm-cells = <2>;
657 pinctrl-names = "default";
658 pinctrl-0 = <&pinctrl_pwm4>;
667 pinctrl-names = "default";
668 pinctrl-0 = <&pinctrl_uart1>;
673 pinctrl-names = "default";
674 pinctrl-0 = <&pinctrl_uart2>;
679 pinctrl-names = "default";
680 pinctrl-0 = <&pinctrl_uart3>;
681 uart-has-rtscts;
686 vbus-supply = <®_usb_h1_vbus>;
691 vbus-supply = <®_usb_otg_vbus>;
692 pinctrl-names = "default";
693 pinctrl-0 = <&pinctrl_usbotg>;
694 disable-over-current;
699 pinctrl-names = "default";
700 pinctrl-0 = <&pinctrl_usdhc2>;
701 bus-width = <4>;
702 non-removable;
703 vmmc-supply = <®_wlan_vmmc>;
704 cap-power-off-card;
705 keep-power-in-suspend;
708 #address-cells = <1>;
709 #size-cells = <0>;
713 interrupt-parent = <&gpio6>;
715 ref-clock-frequency = <38400000>;
720 pinctrl-names = "default";
721 pinctrl-0 = <&pinctrl_usdhc3>;
722 cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
723 bus-width = <4>;
724 vmmc-supply = <®_3p3v>;
729 pinctrl-names = "default";
730 pinctrl-0 = <&pinctrl_usdhc4>;
731 bus-width = <8>;
732 non-removable;
733 vmmc-supply = <®_1p8v>;
734 keep-power-in-suspend;