Lines Matching +full:skew +full:- +full:delay
1 // SPDX-License-Identifier: (GPL-2.0 or MIT)
6 #include <dt-bindings/gpio/gpio.h>
7 #include <dt-bindings/pwm/pwm.h>
8 #include <dt-bindings/input/input.h>
12 model = "emtrion SoM emCON-MX6";
13 compatible = "emtrion,emcon-mx6";
23 stdout-path = &uart1;
31 gpio-keys {
32 compatible = "gpio-keys";
33 pinctrl-names = "default";
34 pinctrl-0 = <&pinctrl_emcon_wake>;
40 wakeup-source;
45 compatible = "gpio-leds";
46 pinctrl-names = "default";
47 pinctrl-0 = <&pinctrl_som_leds>;
52 linux,default-trigger = "heartbeat";
53 default-state = "on";
59 default-state = "keep";
64 lvds_backlight: lvds-backlight {
65 compatible = "pwm-backlight";
66 pinctrl-names = "default";
67 pinctrl-0 = <&pinctrl_lvds_bl>;
68 enable-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>;
70 brightness-levels = <
74 default-brightness-level = <13>;
78 pwm_fan: pwm-fan {
79 compatible = "pwm-fan";
80 #cooling-cells = <2>;
82 cooling-levels = <0 64 127 191 255>;
88 compatible = "fsl,imx-parallel-display";
89 #address-cells = <1>;
90 #size-cells = <0>;
91 pinctrl-names = "default";
92 pinctrl-0 = <&pinctrl_rgb24_display>;
99 remote-endpoint = <&ipu1_di0_disp0>;
107 remote-endpoint = <&rgb_panel_in>;
114 power-supply = <®_parallel_disp>;
118 remote-endpoint = <&rgb_encoder_out>;
123 reg_parallel_disp: reg-parallel-display {
124 compatible = "regulator-fixed";
125 pinctrl-names = "default";
126 pinctrl-0 = <&pinctrl_rgb_bl_en>;
127 regulator-name = "LCD-Supply";
128 regulator-min-microvolt = <5000000>;
129 regulator-max-microvolt = <5000000>;
131 enable-active-high;
134 reg_lvds_disp: reg-lvds-display {
135 compatible = "regulator-fixed";
136 regulator-name = "LVDS-Supply";
137 regulator-min-microvolt = <5000000>;
138 regulator-max-microvolt = <5000000>;
140 enable-active-high;
143 rgb_backlight: rgb-backlight {
144 compatible = "pwm-backlight";
145 pinctrl-names = "default";
146 pinctrl-0 = <&pinctrl_rgb_bl>;
147 enable-gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>;
149 brightness-levels = <
153 default-brightness-level = <13>;
159 pinctrl-names = "default";
160 pinctrl-0 = <&pinctrl_can1>;
164 pinctrl-names = "default";
165 pinctrl-0 = <&pinctrl_can2>;
169 pinctrl-names = "default";
170 pinctrl-0 = <&pinctrl_ecspi2>;
171 cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>,
176 pinctrl-names = "default";
177 pinctrl-0 = <&pinctrl_nor_flash>;
181 pinctrl-names = "default";
182 pinctrl-0 = <&pinctrl_enet>;
183 phy-mode = "rgmii";
184 phy-reset-gpios = <&gpio5 20 GPIO_ACTIVE_LOW>;
185 phy-reset-duration = <50>;
186 phy-supply = <&vdd_1V8_reg>;
187 phy-handle = <&ksz9031>;
191 #address-cells = <1>;
192 #size-cells = <0>;
195 compatible = "ethernet-phy-ieee802.3-c22";
197 interrupt-parent = <&gpio1>;
199 rxdv-skew-ps = <480>;
200 txen-skew-ps = <480>;
201 rxd0-skew-ps = <480>;
202 rxd1-skew-ps = <480>;
203 rxd2-skew-ps = <480>;
204 rxd3-skew-ps = <480>;
205 txd0-skew-ps = <420>;
206 txd1-skew-ps = <420>;
207 txd2-skew-ps = <360>;
208 txd3-skew-ps = <360>;
209 txc-skew-ps = <1020>;
210 rxc-skew-ps = <960>;
216 clock-frequency = <100000>;
217 pinctrl-names = "default";
218 pinctrl-0 = <&pinctrl_i2c1>;
224 pinctrl-names = "default";
225 pinctrl-0 = <&pinctrl_pmic>;
226 interrupt-parent = <&gpio2>;
228 interrupt-controller;
231 compatible = "dlg,da9063-onkey";
232 wakeup-source;
236 compatible = "dlg,da9063-watchdog";
237 timeout-sec = <0>;
242 regulator-min-microvolt = <1100000>;
243 regulator-max-microvolt = <1450000>;
244 regulator-ramp-delay = <2>;
245 regulator-name = "DA9063_CORE";
246 regulator-always-on;
250 regulator-min-microvolt = <1100000>;
251 regulator-max-microvolt = <1450000>;
252 regulator-ramp-delay = <2>;
253 regulator-name = "DA9063_SOC";
254 regulator-always-on;
258 regulator-min-microvolt = <1500000>;
259 regulator-max-microvolt = <1500000>;
260 regulator-ramp-delay = <2>;
261 regulator-always-on;
265 regulator-min-microvolt = <3300000>;
266 regulator-max-microvolt = <3300000>;
267 regulator-ramp-delay = <2>;
268 regulator-always-on;
272 regulator-min-microvolt = <2500000>;
273 regulator-max-microvolt = <2500000>;
274 regulator-always-on;
277 regulator-min-microvolt = <2500000>;
278 regulator-max-microvolt = <2500000>;
279 regulator-always-on;
283 regulator-min-microvolt = <3300000>;
284 regulator-max-microvolt = <3300000>;
285 regulator-always-on;
289 regulator-min-microvolt = <2500000>;
290 regulator-max-microvolt = <2500000>;
291 regulator-always-on;
292 regulator-boot-on;
296 regulator-min-microvolt = <2500000>;
297 regulator-max-microvolt = <2500000>;
298 regulator-always-on;
302 regulator-min-microvolt = <1800000>;
303 regulator-max-microvolt = <1800000>;
304 regulator-always-on;
308 regulator-min-microvolt = <1800000>;
309 regulator-max-microvolt = <3300000>;
310 regulator-always-on;
314 regulator-min-microvolt = <1200000>;
315 regulator-max-microvolt = <1200000>;
316 regulator-always-on;
328 clock-frequency = <100000>;
329 pinctrl-names = "default";
330 pinctrl-0 = <&pinctrl_i2c2>;
374 /*camera2-pinctrl is in imx6q-emcon.dtsi or imx6dl-emcon.dtsi*/
729 remote-endpoint = <&rgb_encoder_in>;
733 pinctrl-names = "default";
734 pinctrl-0 = <&pinctrl_pcie_ctrl>;
735 reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>;
736 disable-gpio = <&gpio2 22 GPIO_ACTIVE_LOW>;
740 #pwm-cells = <2>;
745 #pwm-cells = <2>;
750 #pwm-cells = <2>;
755 pinctrl-names = "default";
756 pinctrl-0 = <&pinctrl_uart1>;
761 pinctrl-names = "default";
762 pinctrl-0 = <&pinctrl_uart2>;
766 pinctrl-names = "default";
767 pinctrl-0 = <&pinctrl_uart3>;
771 pinctrl-names = "default";
772 pinctrl-0 = <&pinctrl_uart4>;
776 pinctrl-names = "default";
777 pinctrl-0 = <&pinctrl_uart5>;
781 pinctrl-names = "default";
782 pinctrl-0 = <&pinctrl_usb_host1>;
786 pinctrl-names = "default";
787 pinctrl-0 = <&pinctrl_usb_otg>;
788 vbus-supply = <®_usb_otg>;
793 pinctrl-names = "default";
794 pinctrl-0 = <&pinctrl_usdhc1>;
795 fsl,wp-controller;
799 pinctrl-names = "default";
800 pinctrl-0 = <&pinctrl_usdhc2>;
801 fsl,wp-controller;
805 pinctrl-names = "default";
806 pinctrl-0 = <&pinctrl_usdhc3>;
807 non-removable;
808 bus-width = <8>;
815 voltage-tolerance = <2>;
819 vin-supply = <&vddcore_reg>;
823 vin-supply = <&vddsoc_reg>;
827 vin-supply = <&vddsoc_reg>;