Lines Matching +full:spdif +full:- +full:connection

4  * This file is dual-licensed: you can use it either under the terms
38  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
41 #include <dt-bindings/input/input.h>
42 #include <dt-bindings/gpio/gpio.h>
51 	ir_recv: ir-receiver {
52 		compatible = "gpio-ir-receiver";
54 		pinctrl-names = "default";
55 		pinctrl-0 = <&pinctrl_cubox_i_ir>;
58 	led-controller {
59 		compatible = "pwm-leds";
60 		pinctrl-names = "default";
61 		pinctrl-0 = <&pinctrl_cubox_i_pwm1>;
63 		led-1 {
64 			active-low;
66 			max-brightness = <248>;
71 	v_5v0: regulator-v-5v0 {
72 		compatible = "regulator-fixed";
73 		regulator-always-on;
74 		regulator-max-microvolt = <5000000>;
75 		regulator-min-microvolt = <5000000>;
76 		regulator-name = "v_5v0";
79 	v_usb2: regulator-v-usb2 {
80 		compatible = "regulator-fixed";
81 		enable-active-high;
83 		pinctrl-names = "default";
84 		pinctrl-0 = <&pinctrl_cubox_i_usbh1_vbus>;
85 		regulator-max-microvolt = <5000000>;
86 		regulator-min-microvolt = <5000000>;
87 		regulator-name = "v_usb2";
88 		vin-supply = <&v_5v0>;
91 	v_usb1: regulator-v-usb1 {
92 		compatible = "regulator-fixed";
93 		enable-active-high;
95 		pinctrl-names = "default";
96 		pinctrl-0 = <&pinctrl_cubox_i_usbotg_vbus>;
97 		regulator-max-microvolt = <5000000>;
98 		regulator-min-microvolt = <5000000>;
99 		regulator-name = "v_usb1";
100 		vin-supply = <&v_5v0>;
103 	sound-spdif {
104 		compatible = "fsl,imx-audio-spdif";
105 		model = "Integrated SPDIF";
107 		spdif-controller = <&spdif>;
108 		spdif-out;
111 	gpio-keys {
112 		compatible = "gpio-keys";
113 		pinctrl-0 = <&pinctrl_gpio_key>;
114 		pinctrl-names = "default";
125 	pinctrl-names = "default";
126 	pinctrl-0 = <&pinctrl_cubox_i_hdmi>;
127 	ddc-i2c-bus = <&i2c2>;
132 	clock-frequency = <100000>;
133 	pinctrl-names = "default";
134 	pinctrl-0 = <&pinctrl_cubox_i_i2c2>;
139 	pinctrl-names = "default";
140 	pinctrl-0 = <&pinctrl_cubox_i_i2c3>;
152 		pinctrl_cubox_i_hdmi: cubox-i-hdmi {
158 		pinctrl_cubox_i_i2c2: cubox-i-i2c2 {
165 		pinctrl_cubox_i_i2c3: cubox-i-i2c3 {
172 		pinctrl_cubox_i_ir: cubox-i-ir {
178 		pinctrl_cubox_i_pwm1: cubox-i-pwm1-front-led {
182 		pinctrl_cubox_i_spdif: cubox-i-spdif {
186 		pinctrl_cubox_i_usbh1: cubox-i-usbh1 {
190 		pinctrl_cubox_i_usbh1_vbus: cubox-i-usbh1-vbus {
194 		pinctrl_cubox_i_usbotg: cubox-i-usbotg {
196 			 * The Cubox-i pulls ID low, but as it's pointless
197 			 * leaving it as a pull-up, even if it is just 10uA.
205 		pinctrl_cubox_i_usbotg_vbus: cubox-i-usbotg-vbus {
209 		pinctrl_cubox_i_usdhc2_aux: cubox-i-usdhc2-aux {
216 		pinctrl_cubox_i_usdhc2: cubox-i-usdhc2 {
227 		pinctrl_gpio_key: gpio-key {
236 	#pwm-cells = <2>;
240 &spdif {
241 	pinctrl-names = "default";
242 	pinctrl-0 = <&pinctrl_cubox_i_spdif>;
247 	pinctrl-names = "default";
248 	pinctrl-0 = <&pinctrl_cubox_i_usbh1>;
249 	vbus-supply = <&v_usb2>;
254 	pinctrl-names = "default";
255 	pinctrl-0 = <&pinctrl_cubox_i_usbotg>;
256 	vbus-supply = <&v_usb1>;
261 	pinctrl-names = "default";
262 	pinctrl-0 = <&pinctrl_cubox_i_usdhc2_aux &pinctrl_cubox_i_usdhc2>;
263 	vmmc-supply = <&vcc_3v3>;
264 	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
269 	vin-supply = <&v_5v0>;