Lines Matching +full:num +full:- +full:interpolated +full:- +full:steps
1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
6 /dts-v1/;
8 #include "imx6qdl-prti6q.dtsi"
9 #include <dt-bindings/leds/common.h>
10 #include <dt-bindings/sound/fsl-imx-audmux.h>
21 backlight_lcd: backlight-lcd {
22 compatible = "pwm-backlight";
23 pinctrl-names = "default";
24 pinctrl-0 = <&pinctrl_backlight>;
26 brightness-levels = <0 16 64 255>;
27 num-interpolated-steps = <16>;
28 default-brightness-level = <1>;
29 power-supply = <®_3v3>;
30 enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
33 can_osc: can-osc {
34 compatible = "fixed-clock";
35 #clock-cells = <0>;
36 clock-frequency = <25000000>;
40 compatible = "gpio-leds";
41 pinctrl-names = "default";
42 pinctrl-0 = <&pinctrl_leds>;
44 led-debug0 {
47 linux,default-trigger = "heartbeat";
50 led-debug1 {
53 linux,default-trigger = "disk-activity";
63 remote-endpoint = <&lvds0_out>;
68 reg_1v8: regulator-1v8 {
69 compatible = "regulator-fixed";
70 regulator-name = "1v8";
71 regulator-min-microvolt = <1800000>;
72 regulator-max-microvolt = <1800000>;
75 reg_wifi: regulator-wifi {
76 compatible = "regulator-fixed";
77 pinctrl-names = "default";
78 pinctrl-0 = <&pinctrl_wifi_npd>;
79 enable-active-high;
81 regulator-max-microvolt = <1800000>;
82 regulator-min-microvolt = <1800000>;
83 regulator-name = "regulator-WL12xx";
84 startup-delay-us = <70000>;
88 compatible = "simple-audio-card";
89 simple-audio-card,name = "prti6q-sgtl5000";
90 simple-audio-card,format = "i2s";
91 simple-audio-card,widgets =
96 simple-audio-card,routing =
102 simple-audio-card,cpu {
103 sound-dai = <&ssi1>;
104 system-clock-frequency = <0>;
107 simple-audio-card,codec {
108 sound-dai = <&sgtl5000>;
109 bitclock-master;
110 frame-master;
114 sound-spdif {
115 compatible = "fsl,imx-audio-spdif";
116 model = "imx-spdif";
117 spdif-controller = <&spdif>;
118 spdif-in;
119 spdif-out;
124 pinctrl-names = "default";
125 pinctrl-0 = <&pinctrl_audmux>;
128 mux-ssi1 {
129 fsl,audmux-port = <0>;
130 fsl,port-config = <
139 mux-pins3 {
140 fsl,audmux-port = <2>;
141 fsl,port-config = <
149 pinctrl-names = "default";
150 pinctrl-0 = <&pinctrl_can1>;
155 pinctrl-names = "default";
156 pinctrl-0 = <&pinctrl_can2>;
161 cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
162 pinctrl-names = "default";
163 pinctrl-0 = <&pinctrl_ecspi1>;
167 compatible = "jedec,spi-nor";
169 spi-max-frequency = <20000000>;
174 cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>, <&gpio4 25 GPIO_ACTIVE_LOW>;
175 pinctrl-names = "default";
176 pinctrl-0 = <&pinctrl_ecspi2 &pinctrl_ecspi2_cs>;
182 pinctrl-names = "default";
183 pinctrl-0 = <&pinctrl_can3>;
185 interrupts-extended = <&gpio3 20 IRQ_TYPE_LEVEL_LOW>;
186 spi-max-frequency = <5000000>;
192 spi-max-frequency = <2000000>;
193 vref-supply = <®_3v3>;
198 cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
199 pinctrl-names = "default";
200 pinctrl-0 = <&pinctrl_ecspi3>;
205 pinctrl-names = "default";
206 pinctrl-0 = <&pinctrl_enet>;
207 phy-mode = "rgmii-id";
208 phy-handle = <&rgmii_phy>;
212 #address-cells = <1>;
213 #size-cells = <0>;
216 rgmii_phy: ethernet-phy@0 {
218 interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>;
219 reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
220 reset-assert-us = <10000>;
221 reset-deassert-us = <300>;
227 pinctrl-names = "default";
228 pinctrl-0 = <&pinctrl_hdmi>;
229 ddc-i2c-bus = <&i2c2>;
234 sgtl5000: audio-codec@a {
237 #sound-dai-cells = <0>;
239 VDDA-supply = <®_3v3>;
240 VDDIO-supply = <®_3v3>;
241 VDDD-supply = <®_1v8>;
247 clock-frequency = <100000>;
248 pinctrl-names = "default";
249 pinctrl-0 = <&pinctrl_i2c2>;
257 #address-cells = <1>;
258 #size-cells = <0>;
295 #pwm-cells = <2>;
296 pinctrl-names = "default";
297 pinctrl-0 = <&pinctrl_pwm1>;
304 lvds-channel@0 {
311 remote-endpoint = <&panel_in>;
326 pinctrl-names = "default";
327 pinctrl-0 = <&pinctrl_spdif>;
332 #sound-dai-cells = <0>;
333 fsl,mode = "ac97-slave";
338 pinctrl-names = "default";
339 pinctrl-0 = <&pinctrl_uart2>;
344 pinctrl-names = "default";
345 pinctrl-0 = <&pinctrl_uart5>;
350 pinctrl-0 = <&pinctrl_usbotg &pinctrl_usbotg_id>;
354 pinctrl-names = "default";
355 pinctrl-0 = <&pinctrl_usdhc2>;
356 non-removable;
357 vmmc-supply = <®_wifi>;
358 cap-power-off-card;
359 keep-power-in-suspend;
364 pinctrl-names = "default";
365 pinctrl-0 = <&pinctrl_wifi>;
366 interrupts-extended = <&gpio1 30 IRQ_TYPE_LEVEL_HIGH>;
367 ref-clock-frequency = <38400000>;
368 tcxo-clock-frequency = <19200000>;