Lines Matching +full:dsr +full:- +full:gpios
1 // SPDX-License-Identifier: GPL-2.0
7 /dts-v1/;
9 #include <dt-bindings/gpio/gpio.h>
15 compatible = "eckelmann,imx6dl-ci4x10", "fsl,imx6dl";
18 stdout-path = &uart3;
26 rmii_clk: clock-rmii {
28 compatible = "fixed-clock";
29 #clock-cells = <0>;
30 clock-frequency = <50000000>;
33 reg_usb_h1_vbus: regulator-usb-h1-vbus {
34 pinctrl-names = "default";
35 pinctrl-0 = <&pinctrl_reg_usb_h1_vbus>;
36 compatible = "regulator-fixed";
37 regulator-name = "usb_h1_vbus";
38 regulator-min-microvolt = <5000000>;
39 regulator-max-microvolt = <5000000>;
41 enable-active-high;
45 compatible = "eckelmann,siox-gpio";
46 pinctrl-names = "default";
47 pinctrl-0 = <&pinctrl_siox>;
48 din-gpios = <&gpio6 11 GPIO_ACTIVE_HIGH>;
49 dout-gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>;
50 dclk-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>;
51 dld-gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>;
56 pinctrl-names = "default";
57 pinctrl-0 = <&pinctrl_flexcan1>;
62 pinctrl-names = "default";
63 pinctrl-0 = <&pinctrl_flexcan2>;
68 pinctrl-names = "default";
69 pinctrl-0 = <&pinctrl_ecspi2>;
70 cs-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
76 spi-max-frequency = <15000000>;
81 pinctrl-names = "default";
82 pinctrl-0 = <&pinctrl_ecspi1>;
83 cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>;
87 compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
89 spi-max-frequency = <10000000>;
94 gpio-line-names = "buzzer", "", "", "", "", "", "", "",
101 gpio-line-names = "", "", "", "", "", "", "", "in2",
108 gpio-line-names = "", "", "", "", "", "", "", "",
115 pinctrl-names = "default";
116 pinctrl-0 = <&pinctrl_i2c1>;
119 temperature-sensor@49 {
131 pinctrl-names = "default";
132 pinctrl-0 = <&pinctrl_hog>;
233 MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x0001b010 /* DSR */
245 MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x0001b010 /* DSR */
295 pinctrl-names = "default";
296 pinctrl-0 = <&pinctrl_enet>;
297 phy-mode = "rmii";
298 phy-reset-gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
299 phy-handle = <&phy>;
304 clock-names = "ipg", "ahb", "ptp", "enet_out";
308 #address-cells = <1>;
309 #size-cells = <0>;
311 phy: ethernet-phy@1 {
312 compatible = "ethernet-phy-ieee802.3-c22";
319 pinctrl-names = "default";
320 pinctrl-0 = <&pinctrl_pcie>;
321 reset-gpio = <&gpio1 20 GPIO_ACTIVE_LOW>;
326 pinctrl-names = "default";
327 pinctrl-0 = <&pinctrl_uart1_dte>;
328 uart-has-rtscts;
329 fsl,dte-mode;
330 dcd-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
331 dtr-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
332 dsr-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
337 pinctrl-names = "default";
338 pinctrl-0 = <&pinctrl_uart2_dte>;
339 uart-has-rtscts;
340 fsl,dte-mode;
341 dcd-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
342 dtr-gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
343 dsr-gpios = <&gpio6 16 GPIO_ACTIVE_LOW>;
348 pinctrl-names = "default";
349 pinctrl-0 = <&pinctrl_uart3_dce>;
354 pinctrl-names = "default";
355 pinctrl-0 = <&pinctrl_uart4_dce>;
356 rts-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>;
361 pinctrl-names = "default";
362 pinctrl-0 = <&pinctrl_uart5_dce>;
363 rts-gpios = <&gpio6 5 GPIO_ACTIVE_HIGH>;
368 pinctrl-names = "default";
369 pinctrl-0 = <&pinctrl_usbh1>;
370 vbus-supply = <®_usb_h1_vbus>;
380 pinctrl-names = "default";
381 pinctrl-0 = <&pinctrl_usdhc3>;
382 bus-width = <8>;
383 non-removable;