Lines Matching +full:serial +full:- +full:leds
1 // SPDX-License-Identifier: GPL-2.0-or-later
8 /dts-v1/;
9 #include <dt-bindings/gpio/gpio.h>
14 compatible = "olimex,imx23-olinuxino", "fsl,imx23";
24 compatible = "fsl,imx23-mmc";
25 pinctrl-names = "default";
26 pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_sck_cfg>;
27 bus-width = <4>;
28 broken-cd;
33 pinctrl-names = "default";
34 pinctrl-0 = <&hog_pins_a>;
38 fsl,pinmux-ids = <
41 fsl,drive-strength = <MXS_DRIVE_4mA>;
43 fsl,pull-up = <MXS_PULL_DISABLE>;
48 fsl,pinmux-ids = <
51 fsl,drive-strength = <MXS_DRIVE_4mA>;
53 fsl,pull-up = <MXS_PULL_DISABLE>;
58 #address-cells = <1>;
59 #size-cells = <0>;
60 compatible = "fsl,imx23-spi";
61 pinctrl-names = "default";
62 pinctrl-0 = <&spi2_pins_a>;
73 pinctrl-names = "default";
74 pinctrl-0 = <&i2c_pins_b>;
78 duart: serial@80070000 {
79 pinctrl-names = "default";
80 pinctrl-0 = <&duart_pins_a>;
84 auart0: serial@8006c000 {
85 pinctrl-names = "default";
86 pinctrl-0 = <&auart0_2pins_a>;
99 vbus-supply = <®_usb0_vbus>;
105 compatible = "simple-bus";
106 #address-cells = <1>;
107 #size-cells = <0>;
110 compatible = "regulator-fixed";
112 regulator-name = "usb0_vbus";
113 regulator-min-microvolt = <5000000>;
114 regulator-max-microvolt = <5000000>;
115 enable-active-high;
116 startup-delay-us = <300>; /* LAN9215 requires a POR of 200us minimum */
121 leds {
122 compatible = "gpio-leds";
123 pinctrl-names = "default";
124 pinctrl-0 = <&led_pin_gpio2_1>;