Lines Matching +full:i2s0 +full:- +full:bus +full:- +full:pins
1 // SPDX-License-Identifier: GPL-2.0
9 /dts-v1/;
10 #include <dt-bindings/clock/samsung,s2mps11.h>
11 #include <dt-bindings/gpio/gpio.h>
12 #include <dt-bindings/interrupt-controller/irq.h>
13 #include <dt-bindings/input/input.h>
19 chassis-type = "laptop";
28 stdout-path = "serial3:115200n8";
31 gpio-keys {
32 compatible = "gpio-keys";
33 pinctrl-names = "default";
34 pinctrl-0 = <&power_key_irq>, <&lid_irq>;
36 power-key {
40 wakeup-source;
43 lid-switch {
46 linux,input-type = <5>; /* EV_SW */
48 debounce-interval = <1>;
49 wakeup-source;
53 usb-hub {
55 reset-gpios = <&gpe1 0 GPIO_ACTIVE_LOW>;
56 pinctrl-names = "default";
57 pinctrl-0 = <&hsic_reset>;
60 fixed-rate-clocks {
62 compatible = "samsung,clock-xxti";
63 clock-frequency = <24000000>;
69 cpu0-supply = <&buck2_reg>;
74 pinctrl-names = "default";
75 pinctrl-0 = <&dp_hpd_gpio>;
76 samsung,color-space = <0>;
77 samsung,color-depth = <1>;
78 samsung,link-rate = <0x0a>;
79 samsung,lane-count = <1>;
80 hpd-gpios = <&gpc3 0 GPIO_ACTIVE_HIGH>;
84 samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
89 samsung,invert-vclk;
94 hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
95 pinctrl-names = "default";
96 pinctrl-0 = <&hdmi_hpd_irq>;
98 hdmi-en-supply = <&ldo8_reg>;
99 vdd-supply = <&ldo8_reg>;
100 vdd_osc-supply = <&ldo10_reg>;
101 vdd_pll-supply = <&ldo8_reg>;
106 samsung,i2c-sda-delay = <100>;
107 samsung,i2c-max-bus-freq = <378000>;
110 compatible = "samsung,s5m8767-pmic";
112 interrupt-parent = <&gpx3>;
114 pinctrl-names = "default";
115 pinctrl-0 = <&s5m8767_irq &s5m8767_dvs &s5m8767_ds>;
116 wakeup-source;
118 s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>, /* DVS1 */
122 s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_LOW>, /* SET1 */
131 s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>,
136 s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
141 s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>,
147 compatible = "samsung,s5m8767-clk";
148 #clock-cells = <1>;
149 clock-output-names = "en32khz_ap",
156 regulator-name = "P1.0V_LDO_OUT4";
157 regulator-min-microvolt = <1000000>;
158 regulator-max-microvolt = <1000000>;
159 regulator-always-on;
164 regulator-name = "P1.0V_LDO_OUT5";
165 regulator-min-microvolt = <1000000>;
166 regulator-max-microvolt = <1000000>;
167 regulator-always-on;
172 regulator-name = "vdd_mydp";
173 regulator-min-microvolt = <1000000>;
174 regulator-max-microvolt = <1000000>;
175 regulator-always-on;
180 regulator-name = "P1.1V_LDO_OUT7";
181 regulator-min-microvolt = <1100000>;
182 regulator-max-microvolt = <1100000>;
183 regulator-always-on;
188 regulator-name = "P1.0V_LDO_OUT8";
189 regulator-min-microvolt = <1000000>;
190 regulator-max-microvolt = <1000000>;
191 regulator-always-on;
196 regulator-name = "P1.8V_LDO_OUT10";
197 regulator-min-microvolt = <1800000>;
198 regulator-max-microvolt = <1800000>;
199 regulator-always-on;
204 regulator-name = "P1.8V_LDO_OUT11";
205 regulator-min-microvolt = <1800000>;
206 regulator-max-microvolt = <1800000>;
207 regulator-always-on;
212 regulator-name = "P3.0V_LDO_OUT12";
213 regulator-min-microvolt = <3000000>;
214 regulator-max-microvolt = <3000000>;
215 regulator-always-on;
220 regulator-name = "P1.8V_LDO_OUT13";
221 regulator-min-microvolt = <1800000>;
222 regulator-max-microvolt = <1800000>;
223 regulator-always-on;
228 regulator-name = "P1.8V_LDO_OUT14";
229 regulator-min-microvolt = <1800000>;
230 regulator-max-microvolt = <1800000>;
231 regulator-always-on;
236 regulator-name = "P1.0V_LDO_OUT15";
237 regulator-min-microvolt = <1000000>;
238 regulator-max-microvolt = <1000000>;
239 regulator-always-on;
244 regulator-name = "P1.8V_LDO_OUT16";
245 regulator-min-microvolt = <1800000>;
246 regulator-max-microvolt = <1800000>;
247 regulator-always-on;
252 regulator-name = "P2.8V_LDO_OUT17";
253 regulator-min-microvolt = <2800000>;
254 regulator-max-microvolt = <2800000>;
255 regulator-always-on;
260 regulator-name = "vdd_bridge";
261 regulator-min-microvolt = <1200000>;
262 regulator-max-microvolt = <1200000>;
263 regulator-always-on;
268 regulator-name = "vdd_mif";
269 regulator-min-microvolt = <950000>;
270 regulator-max-microvolt = <1300000>;
271 regulator-always-on;
272 regulator-boot-on;
277 regulator-name = "vdd_arm";
278 regulator-min-microvolt = <850000>;
279 regulator-max-microvolt = <1350000>;
280 regulator-always-on;
281 regulator-boot-on;
286 regulator-name = "vdd_int";
287 regulator-min-microvolt = <900000>;
288 regulator-max-microvolt = <1200000>;
289 regulator-always-on;
290 regulator-boot-on;
295 regulator-name = "vdd_g3d";
296 regulator-min-microvolt = <850000>;
297 regulator-max-microvolt = <1300000>;
298 regulator-boot-on;
303 regulator-name = "P1.8V_BUCK_OUT5";
304 regulator-min-microvolt = <1800000>;
305 regulator-max-microvolt = <1800000>;
306 regulator-always-on;
307 regulator-boot-on;
312 regulator-name = "P1.2V_BUCK_OUT6";
313 regulator-min-microvolt = <1200000>;
314 regulator-max-microvolt = <1200000>;
315 regulator-always-on;
316 regulator-boot-on;
321 regulator-name = "vdd_ummc";
322 regulator-min-microvolt = <950000>;
323 regulator-max-microvolt = <3000000>;
324 regulator-always-on;
325 regulator-boot-on;
334 samsung,i2c-sda-delay = <100>;
335 samsung,i2c-max-bus-freq = <378000>;
340 interrupt-parent = <&gpx1>;
342 pinctrl-names = "default";
343 pinctrl-0 = <&trackpad_irq>;
344 linux,gpio-keymap = <KEY_RESERVED
350 wakeup-source;
356 * double-pulling gets us out of spec in some cases.
359 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
365 samsung,i2c-sda-delay = <100>;
366 samsung,i2c-max-bus-freq = <66000>;
371 samsung,i2c-sda-delay = <100>;
372 samsung,i2c-max-bus-freq = <66000>;
377 samsung,i2c-sda-delay = <100>;
378 samsung,i2c-max-bus-freq = <66000>;
380 cros_ec: embedded-controller@1e {
381 compatible = "google,cros-ec-i2c";
384 interrupt-parent = <&gpx1>;
385 wakeup-source;
386 pinctrl-names = "default";
387 pinctrl-0 = <&ec_irq>;
393 samsung,i2c-sda-delay = <100>;
394 samsung,i2c-max-bus-freq = <66000>;
399 samsung,i2c-sda-delay = <100>;
400 samsung,i2c-max-bus-freq = <66000>;
402 temperature-sensor@4c {
411 samsung,i2c-sda-delay = <100>;
412 samsung,i2c-max-bus-freq = <378000>;
415 &i2s0 {
425 broken-cd;
426 card-detect-delay = <200>;
427 samsung,dw-mshc-ciu-div = <3>;
428 samsung,dw-mshc-sdr-timing = <2 3>;
429 samsung,dw-mshc-ddr-timing = <1 2>;
430 pinctrl-names = "default";
431 pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>;
432 bus-width = <8>;
433 cap-mmc-highspeed;
442 broken-cd;
443 card-detect-delay = <200>;
444 samsung,dw-mshc-ciu-div = <3>;
445 samsung,dw-mshc-sdr-timing = <2 3>;
446 samsung,dw-mshc-ddr-timing = <1 2>;
447 pinctrl-names = "default";
448 pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus4>;
449 bus-width = <4>;
450 cap-sd-highspeed;
454 s5m8767_dvs: s5m8767-dvs-pins {
455 samsung,pins = "gpd1-0", "gpd1-1", "gpd1-2";
456 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
457 samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
458 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
461 dp_hpd_gpio: dp-hpd-pins {
462 samsung,pins = "gpc3-0";
463 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
464 samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
465 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
468 trackpad_irq: trackpad-irq-pins {
469 samsung,pins = "gpx1-2";
470 samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
471 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
472 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
475 power_key_irq: power-key-irq-pins {
476 samsung,pins = "gpx1-3";
477 samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
478 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
479 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
482 ec_irq: ec-irq-pins {
483 samsung,pins = "gpx1-6";
484 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
485 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
486 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
489 s5m8767_ds: s5m8767-ds-pins {
490 samsung,pins = "gpx2-3", "gpx2-4", "gpx2-5";
491 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
492 samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
493 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
496 s5m8767_irq: s5m8767-irq-pins {
497 samsung,pins = "gpx3-2";
498 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
499 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
500 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
503 lid_irq: lid-irq-pins {
504 samsung,pins = "gpx3-5";
505 samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
506 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
507 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
510 hdmi_hpd_irq: hdmi-hpd-irq-pins {
511 samsung,pins = "gpx3-7";
512 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
513 samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
514 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
519 hsic_reset: hsic-reset-pins {
520 samsung,pins = "gpe1-0";
521 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
522 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
523 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
530 clock-names = "rtc", "rtc_src";
534 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
538 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
542 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
546 samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
547 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
552 samsung,spi-src-clk = <0>;
553 num-cs = <1>;
557 vdd10-supply = <&ldo15_reg>;
558 vdd33-supply = <&ldo12_reg>;
561 #include "cros-ec-keyboard.dtsi"