Lines Matching +full:gpk0 +full:- +full:4
1 // SPDX-License-Identifier: GPL-2.0
4 * Based on exynos4412-midas.dtsi.
10 /dts-v1/;
12 #include "exynos4412-ppmu-common.dtsi"
14 #include <dt-bindings/clock/maxim,max77686.h>
15 #include <dt-bindings/gpio/gpio.h>
16 #include <dt-bindings/input/linux-event-codes.h>
17 #include <dt-bindings/interrupt-controller/irq.h>
18 #include <dt-bindings/power/summit,smb347-charger.h>
19 #include "exynos-pinctrl.h"
30 stdout-path = &serial_2;
34 compatible = "samsung,secure-firmware";
38 fixed-rate-clocks {
40 compatible = "samsung,clock-xxti";
41 clock-frequency = <0>;
45 compatible = "samsung,clock-xusbxti";
46 clock-frequency = <24000000>;
50 gpio-keys {
51 compatible = "gpio-keys";
52 pinctrl-names = "default";
53 pinctrl-0 = <&gpio_keys>;
55 key-down {
59 debounce-interval = <10>;
62 key-up {
66 debounce-interval = <10>;
69 key-power {
73 debounce-interval = <10>;
74 wakeup-source;
78 voltage-regulator-1 {
79 compatible = "regulator-fixed";
80 regulator-name = "TSP_LDO1";
81 pinctrl-names = "default";
82 pinctrl-0 = <&tsp_reg_gpio_1>;
84 enable-active-high;
85 regulator-always-on;
88 voltage-regulator-2 {
89 compatible = "regulator-fixed";
90 regulator-name = "TSP_LDO2";
91 pinctrl-names = "default";
92 pinctrl-0 = <&tsp_reg_gpio_2>;
94 enable-active-high;
95 regulator-always-on;
98 voltage-regulator-3 {
99 compatible = "regulator-fixed";
100 regulator-name = "TSP_LDO3";
101 pinctrl-names = "default";
102 pinctrl-0 = <&tsp_reg_gpio_3>;
104 startup-delay-us = <20000>;
105 enable-active-high;
106 regulator-always-on;
109 panel_vdd: voltage-regulator-4 {
110 compatible = "regulator-fixed";
111 regulator-name = "LCD_ENABLE";
112 pinctrl-names = "default";
113 pinctrl-0 = <&lcd_enable>;
115 enable-active-high;
116 regulator-boot-on;
119 wlan_pwrseq: sdhci3-pwrseq {
120 compatible = "mmc-pwrseq-simple";
121 reset-gpios = <&gpm3 5 GPIO_ACTIVE_LOW>;
122 pinctrl-0 = <&wifi_reset>;
123 pinctrl-names = "default";
125 clock-names = "ext_clock";
128 battery_cell: battery-cell {
129 compatible = "simple-battery";
130 device-chemistry = "lithium-ion";
131 constant-charge-current-max-microamp = <2200000>;
132 precharge-current-microamp = <250000>;
133 charge-term-current-microamp = <250000>;
134 constant-charge-voltage-max-microvolt = <4200000>;
136 power-supplies = <&power_supply>;
139 i2c-gpio-1 {
140 compatible = "i2c-gpio";
141 sda-gpios = <&gpy2 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
142 scl-gpios = <&gpy2 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
143 i2c-gpio,delay-us = <2>;
144 #address-cells = <1>;
145 #size-cells = <0>;
148 compatible = "asahi-kasei,ak8975";
150 pinctrl-0 = <&ak8975_irq>;
151 pinctrl-names = "default";
152 interrupt-parent = <&gpm4>;
157 i2c-gpio-2 {
158 compatible = "i2c-gpio";
159 sda-gpios = <&gpy0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
160 scl-gpios = <&gpy0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
161 i2c-gpio,delay-us = <2>;
162 #address-cells = <1>;
163 #size-cells = <0>;
165 fuel-gauge@36 {
168 pinctrl-0 = <&fuel_alert_irq>;
169 pinctrl-names = "default";
170 interrupt-parent = <&gpx2>;
172 maxim,rsns-microohm = <10000>;
173 maxim,over-heat-temp = <600>;
174 maxim,over-volt = <4300>;
178 i2c-gpio-3 {
179 compatible = "i2c-gpio";
180 sda-gpios = <&gpm4 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
181 scl-gpios = <&gpm4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
182 i2c-gpio,delay-us = <5>;
183 #address-cells = <1>;
184 #size-cells = <0>;
189 pinctrl-0 = <&stmpe_adc_irq>;
190 pinctrl-names = "default";
191 interrupt-parent = <&gpx0>;
193 interrupt-controller;
194 irq-trigger = <0x1>;
195 st,adc-freq = <3>;
196 st,mod-12b = <1>;
197 st,ref-sel = <0>;
198 st,sample-time = <3>;
201 compatible = "st,stmpe-adc";
202 #io-channel-cells = <1>;
203 st,norequest-mask = <0x2F>;
208 i2c-gpio-4 {
209 compatible = "i2c-gpio";
210 sda-gpios = <&gpm2 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
211 scl-gpios = <&gpm2 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
213 i2c-gpio,delay-us = <2>;
214 #address-cells = <1>;
215 #size-cells = <0>;
220 summit,enable-usb-charging;
221 summit,enable-charge-control = <SMB3XX_CHG_ENABLE_SW>;
222 summit,fast-voltage-threshold-microvolt = <2600000>;
223 summit,chip-temperature-threshold-celsius = <130>;
224 summit,usb-current-limit-microamp = <1800000>;
226 monitored-battery = <&battery_cell>;
232 pinctrl-0 = <&lvds_nshdn>;
233 pinctrl-names = "default";
234 power-supply = <&panel_vdd>;
235 enable-gpios = <&gpm0 5 GPIO_ACTIVE_HIGH>;
240 remote-endpoint = <&fimd_ep>;
246 compatible = "pwm-backlight";
247 pinctrl-0 = <&led_bl_reset>;
248 pinctrl-names = "default";
249 enable-gpios = <&gpm0 1 GPIO_ACTIVE_HIGH>;
251 brightness-levels = <0 48 128 255>;
252 num-interpolated-steps = <8>;
253 default-brightness-level = <12>;
258 vdd-supply = <&ldo3_reg>;
264 devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
265 vdd-supply = <&buck1_reg>;
280 devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
281 vdd-supply = <&buck3_reg>;
311 cpu0-supply = <&buck2_reg>;
315 cooling-maps {
318 cooling-device = <&cpu0 7 7>, <&cpu1 7 7>,
323 cooling-device = <&cpu0 13 13>, <&cpu1 13 13>,
334 pinctrl-0 = <&lcd_clk &lcd_data24>;
335 pinctrl-names = "default";
336 #address-cells = <1>;
337 #size-cells = <0>;
340 samsung,invert-vclk;
346 remote-endpoint = <&lcd_ep>;
352 mali-supply = <&buck4_reg>;
357 vusb_a-supply = <&ldo12_reg>;
363 samsung,i2c-sda-delay = <100>;
364 samsung,i2c-slave-addr = <0x10>;
365 samsung,i2c-max-bus-freq = <400000>;
366 pinctrl-0 = <&i2c3_bus>;
367 pinctrl-names = "default";
370 touchscreen@4a {
373 pinctrl-0 = <&tsp_rst &tsp_irq>;
374 pinctrl-names = "default";
375 interrupt-parent = <&gpm2>;
377 reset-gpios = <&gpm0 4 GPIO_ACTIVE_LOW>;
382 samsung,i2c-sda-delay = <100>;
383 samsung,i2c-slave-addr = <0x10>;
384 samsung,i2c-max-bus-freq = <400000>;
385 pinctrl-0 = <&i2c7_bus>;
386 pinctrl-names = "default";
391 interrupt-parent = <&gpx0>;
393 pinctrl-0 = <&max77686_irq>;
394 pinctrl-names = "default";
395 wakeup-source;
397 #clock-cells = <1>;
399 voltage-regulators {
401 regulator-name = "ldo1";
402 regulator-always-on;
406 regulator-name = "ldo2";
407 regulator-always-on;
412 regulator-name = "VCC_1.8V_AP";
413 regulator-min-microvolt = <1800000>;
414 regulator-max-microvolt = <1800000>;
415 regulator-always-on;
416 regulator-boot-on;
418 regulator-state-mem {
419 regulator-on-in-suspend;
424 regulator-name = "ldo4";
425 regulator-always-on;
429 regulator-name = "VCC_1.8V_IO";
430 regulator-min-microvolt = <1800000>;
431 regulator-max-microvolt = <1800000>;
433 regulator-state-mem {
434 regulator-off-in-suspend;
439 regulator-name = "ldo6";
440 regulator-always-on;
444 regulator-name = "ldo7";
445 regulator-always-on;
450 regulator-name = "VMIPI_1.0V";
451 regulator-min-microvolt = <1000000>;
452 regulator-max-microvolt = <1000000>;
453 regulator-always-on;
454 regulator-boot-on;
456 regulator-state-mem {
457 regulator-on-in-suspend;
463 regulator-name = "VLED_IC_1.9V";
464 regulator-min-microvolt = <1950000>;
465 regulator-max-microvolt = <1950000>;
467 regulator-state-mem {
468 regulator-off-in-suspend;
474 regulator-name = "VMIPI_1.8V";
475 regulator-min-microvolt = <1800000>;
476 regulator-max-microvolt = <1800000>;
477 regulator-always-on;
478 regulator-boot-on;
480 regulator-state-mem {
481 regulator-on-in-suspend;
486 regulator-name = "VABB1_1.9V";
487 regulator-min-microvolt = <1950000>;
488 regulator-max-microvolt = <1950000>;
489 regulator-always-on;
490 regulator-boot-on;
492 regulator-state-mem {
493 regulator-off-in-suspend;
499 regulator-name = "VUOTG_3.0V";
500 regulator-min-microvolt = <3000000>;
501 regulator-max-microvolt = <3000000>;
502 regulator-always-on;
503 regulator-boot-on;
505 regulator-state-mem {
506 regulator-on-in-suspend;
512 regulator-name = "ldo13";
516 regulator-name = "VABB2_1.9V";
517 regulator-min-microvolt = <1950000>;
518 regulator-max-microvolt = <1950000>;
519 regulator-always-on;
520 regulator-boot-on;
522 regulator-state-mem {
523 regulator-off-in-suspend;
528 regulator-name = "ldo15";
529 regulator-always-on;
533 regulator-name = "ldo16";
534 regulator-always-on;
539 regulator-name = "ldo17";
544 regulator-name = "CAM_IO_1.8V";
545 regulator-min-microvolt = <1800000>;
546 regulator-max-microvolt = <1800000>;
548 regulator-state-mem {
549 regulator-off-in-suspend;
555 regulator-name = "VT_CORE_1.8V";
556 regulator-min-microvolt = <1800000>;
557 regulator-max-microvolt = <1800000>;
559 regulator-state-mem {
560 regulator-off-in-suspend;
566 regulator-name = "ldo20";
571 regulator-name = "VTF_2.8V";
572 regulator-min-microvolt = <2800000>;
573 regulator-max-microvolt = <2800000>;
574 maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>;
579 regulator-name = "ldo22";
584 regulator-name = "VDD_ADC_3.3V";
585 regulator-min-microvolt = <3300000>;
586 regulator-max-microvolt = <3300000>;
587 regulator-always-on;
588 regulator-boot-on;
590 regulator-state-mem {
591 regulator-off-in-suspend;
597 regulator-name = "CAM_A2.8V";
598 regulator-min-microvolt = <2800000>;
599 regulator-max-microvolt = <2800000>;
601 regulator-state-mem {
602 regulator-off-in-suspend;
607 regulator-name = "VLED_3.3V";
608 regulator-min-microvolt = <3300000>;
609 regulator-max-microvolt = <3300000>;
611 regulator-state-mem {
612 regulator-off-in-suspend;
618 regulator-name = "3MP_AF_2.8V";
619 regulator-min-microvolt = <2800000>;
620 regulator-max-microvolt = <2800000>;
622 regulator-state-mem {
623 regulator-off-in-suspend;
628 regulator-name = "VDD_MIF";
629 regulator-min-microvolt = <850000>;
630 regulator-max-microvolt = <1050000>;
631 regulator-always-on;
632 regulator-boot-on;
636 regulator-name = "VDD_ARM";
637 regulator-min-microvolt = <850000>;
638 regulator-max-microvolt = <1500000>;
639 regulator-always-on;
640 regulator-boot-on;
644 regulator-name = "VDD_INT";
645 regulator-min-microvolt = <850000>;
646 regulator-max-microvolt = <1100000>;
647 regulator-always-on;
648 regulator-boot-on;
652 regulator-name = "VDD_G3D";
653 regulator-min-microvolt = <850000>;
654 regulator-max-microvolt = <1075000>;
655 regulator-boot-on;
659 regulator-name = "buck5";
660 regulator-always-on;
664 regulator-name = "buck6";
665 regulator-always-on;
669 regulator-name = "buck7";
670 regulator-always-on;
675 regulator-name = "buck8";
679 regulator-name = "3MP_CORE_1.2V";
680 regulator-min-microvolt = <1200000>;
681 regulator-max-microvolt = <1200000>;
683 regulator-state-mem {
684 regulator-off-in-suspend;
692 broken-cd;
693 non-removable;
694 card-detect-delay = <200>;
695 clock-frequency = <400000000>;
696 samsung,dw-mshc-ciu-div = <0>;
697 samsung,dw-mshc-sdr-timing = <2 3>;
698 samsung,dw-mshc-ddr-timing = <1 2>;
699 pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
700 pinctrl-names = "default";
701 bus-width = <4>;
702 cap-mmc-highspeed;
703 cap-sd-highspeed;
708 pinctrl-names = "default";
709 pinctrl-0 = <&sleep0>;
711 tsp_reg_gpio_2: tsp-reg-gpio-2-pins {
712 samsung,pins = "gpb-5";
713 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
714 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
717 tsp_reg_gpio_3: tsp-reg-gpio-3-pins {
718 samsung,pins = "gpb-7";
719 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
720 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
723 lcd_enable: lcd-enable-pins {
724 samsung,pins = "gpc0-1";
725 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
726 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
729 sleep0: sleep-state {
730 PIN_SLP(gpa0-0, INPUT, NONE);
731 PIN_SLP(gpa0-1, OUT0, NONE);
732 PIN_SLP(gpa0-2, INPUT, NONE);
733 PIN_SLP(gpa0-3, INPUT, UP);
734 PIN_SLP(gpa0-4, INPUT, NONE);
735 PIN_SLP(gpa0-5, INPUT, DOWN);
736 PIN_SLP(gpa0-6, INPUT, DOWN);
737 PIN_SLP(gpa0-7, INPUT, UP);
739 PIN_SLP(gpa1-0, INPUT, DOWN);
740 PIN_SLP(gpa1-1, INPUT, DOWN);
741 PIN_SLP(gpa1-2, INPUT, DOWN);
742 PIN_SLP(gpa1-3, INPUT, DOWN);
743 PIN_SLP(gpa1-4, INPUT, DOWN);
744 PIN_SLP(gpa1-5, INPUT, DOWN);
746 PIN_SLP(gpb-0, INPUT, NONE);
747 PIN_SLP(gpb-1, INPUT, NONE);
748 PIN_SLP(gpb-2, INPUT, NONE);
749 PIN_SLP(gpb-3, INPUT, NONE);
750 PIN_SLP(gpb-4, INPUT, DOWN);
751 PIN_SLP(gpb-5, INPUT, DOWN);
752 PIN_SLP(gpb-6, INPUT, DOWN);
753 PIN_SLP(gpb-7, INPUT, DOWN);
755 PIN_SLP(gpc0-0, INPUT, DOWN);
756 PIN_SLP(gpc0-1, INPUT, DOWN);
757 PIN_SLP(gpc0-2, INPUT, DOWN);
758 PIN_SLP(gpc0-3, INPUT, DOWN);
759 PIN_SLP(gpc0-4, INPUT, DOWN);
761 PIN_SLP(gpc1-0, INPUT, UP);
762 PIN_SLP(gpc1-1, PREV, NONE);
763 PIN_SLP(gpc1-2, INPUT, UP);
764 PIN_SLP(gpc1-3, INPUT, UP);
765 PIN_SLP(gpc1-4, INPUT, UP);
767 PIN_SLP(gpd0-0, INPUT, DOWN);
768 PIN_SLP(gpd0-1, OUT0, NONE);
769 PIN_SLP(gpd0-2, INPUT, NONE);
770 PIN_SLP(gpd0-3, INPUT, NONE);
772 PIN_SLP(gpd1-0, INPUT, DOWN);
773 PIN_SLP(gpd1-1, INPUT, DOWN);
774 PIN_SLP(gpd1-2, INPUT, NONE);
775 PIN_SLP(gpd1-3, INPUT, NONE);
777 PIN_SLP(gpf0-0, OUT0, NONE);
778 PIN_SLP(gpf0-1, OUT0, NONE);
779 PIN_SLP(gpf0-2, OUT0, NONE);
780 PIN_SLP(gpf0-3, OUT0, NONE);
781 PIN_SLP(gpf0-4, OUT0, NONE);
782 PIN_SLP(gpf0-5, OUT0, NONE);
783 PIN_SLP(gpf0-6, OUT0, NONE);
784 PIN_SLP(gpf0-7, OUT0, NONE);
786 PIN_SLP(gpf1-0, OUT0, NONE);
787 PIN_SLP(gpf1-1, OUT0, NONE);
788 PIN_SLP(gpf1-2, OUT0, NONE);
789 PIN_SLP(gpf1-3, OUT0, NONE);
790 PIN_SLP(gpf1-4, OUT0, NONE);
791 PIN_SLP(gpf1-5, OUT0, NONE);
792 PIN_SLP(gpf1-6, OUT0, NONE);
793 PIN_SLP(gpf1-7, OUT0, NONE);
795 PIN_SLP(gpf2-0, OUT0, NONE);
796 PIN_SLP(gpf2-1, OUT0, NONE);
797 PIN_SLP(gpf2-2, OUT0, NONE);
798 PIN_SLP(gpf2-3, OUT0, NONE);
799 PIN_SLP(gpf2-4, OUT0, NONE);
800 PIN_SLP(gpf2-5, OUT0, NONE);
801 PIN_SLP(gpf2-6, OUT0, NONE);
802 PIN_SLP(gpf2-7, OUT0, NONE);
804 PIN_SLP(gpf3-0, OUT0, NONE);
805 PIN_SLP(gpf3-1, OUT0, NONE);
806 PIN_SLP(gpf3-2, OUT0, NONE);
807 PIN_SLP(gpf3-3, OUT0, NONE);
808 PIN_SLP(gpf3-4, OUT0, NONE);
809 PIN_SLP(gpf3-5, OUT0, NONE);
811 PIN_SLP(gpj0-0, INPUT, DOWN);
812 PIN_SLP(gpj0-1, INPUT, DOWN);
813 PIN_SLP(gpj0-2, INPUT, DOWN);
814 PIN_SLP(gpj0-3, PREV, NONE);
815 PIN_SLP(gpj0-4, PREV, NONE);
816 PIN_SLP(gpj0-5, OUT0, NONE);
817 PIN_SLP(gpj0-6, OUT0, NONE);
818 PIN_SLP(gpj0-7, OUT0, NONE);
820 PIN_SLP(gpj1-0, OUT0, NONE);
821 PIN_SLP(gpj1-1, INPUT, DOWN);
822 PIN_SLP(gpj1-2, PREV, NONE);
823 PIN_SLP(gpj1-3, OUT0, NONE);
828 pinctrl-names = "default";
829 pinctrl-0 = <&sleep1>;
831 sd3_wifi: sd3-wifi-pins {
832 samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
833 samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
834 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
837 bt_shutdown: bt-shutdown-pins {
838 samsung,pins = "gpl0-6";
839 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
840 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
843 uart_sel: uart-sel-pins {
844 samsung,pins = "gpl2-7";
845 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
846 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
847 samsung,pin-val = <1>;
851 led_bl_reset: led-bl-reset-pins {
852 samsung,pins = "gpm0-1";
853 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
854 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
857 tsp_rst: tsp-rst-pins {
858 samsung,pins = "gpm0-4";
859 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
860 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
863 lvds_nshdn: lvds-nshdn-pins {
864 samsung,pins = "gpm0-5";
865 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
866 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
869 tsp_irq: tsp-irq-pins {
870 samsung,pins = "gpm2-3";
871 samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
872 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
875 wifi_reset: wifi-reset-pins {
876 samsung,pins = "gpm3-5";
877 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
878 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
881 tsp_reg_gpio_1: tsp-reg-gpio-1-pins {
882 samsung,pins = "gpm4-5";
883 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
884 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
887 ak8975_irq: ak8975-irq-pins {
888 samsung,pins = "gpm4-7";
889 samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
890 samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
893 stmpe_adc_irq: stmpe-adc-irq-pins {
894 samsung,pins = "gpx0-1";
895 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
896 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
899 max77686_irq: max77686-irq-pins {
900 samsung,pins = "gpx0-7";
901 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
904 gpio_keys: gpio-keys-pins {
905 samsung,pins = "gpx2-2", "gpx2-7", "gpx3-3";
906 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
909 fuel_alert_irq: fuel-alert-irq-pins {
910 samsung,pins = "gpx2-3";
911 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
912 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
915 wifi_host_wake: wifi-host-wake-pins {
916 samsung,pins = "gpx2-5";
917 samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
918 samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
921 bt_host_wakeup: bt-host-wakeup-pins {
922 samsung,pins = "gpx2-6";
923 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
924 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
927 bt_device_wakeup: bt-device-wakeup-pins {
928 samsung,pins = "gpx3-1";
929 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
930 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
933 sdhci2_cd: sdhci2-cd-pins {
934 samsung,pins = "gpx3-4";
935 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
938 sleep1: sleep-state {
939 PIN_SLP(gpk0-0, PREV, NONE);
940 PIN_SLP(gpk0-1, PREV, NONE);
941 PIN_SLP(gpk0-2, PREV, NONE);
942 PIN_SLP(gpk0-3, PREV, NONE);
943 PIN_SLP(gpk0-4, PREV, NONE);
944 PIN_SLP(gpk0-5, PREV, NONE);
945 PIN_SLP(gpk0-6, PREV, NONE);
947 PIN_SLP(gpk1-0, INPUT, DOWN);
948 PIN_SLP(gpk1-1, INPUT, DOWN);
949 PIN_SLP(gpk1-2, INPUT, DOWN);
950 PIN_SLP(gpk1-3, PREV, NONE);
951 PIN_SLP(gpk1-4, PREV, NONE);
952 PIN_SLP(gpk1-5, PREV, NONE);
953 PIN_SLP(gpk1-6, PREV, NONE);
955 PIN_SLP(gpk2-0, INPUT, DOWN);
956 PIN_SLP(gpk2-1, INPUT, DOWN);
957 PIN_SLP(gpk2-2, INPUT, DOWN);
958 PIN_SLP(gpk2-3, INPUT, DOWN);
959 PIN_SLP(gpk2-4, INPUT, DOWN);
960 PIN_SLP(gpk2-5, INPUT, DOWN);
961 PIN_SLP(gpk2-6, INPUT, DOWN);
963 PIN_SLP(gpk3-0, OUT0, NONE);
964 PIN_SLP(gpk3-1, INPUT, NONE);
965 PIN_SLP(gpk3-2, INPUT, DOWN);
966 PIN_SLP(gpk3-3, INPUT, NONE);
967 PIN_SLP(gpk3-4, INPUT, NONE);
968 PIN_SLP(gpk3-5, INPUT, NONE);
969 PIN_SLP(gpk3-6, INPUT, NONE);
971 PIN_SLP(gpl0-0, OUT0, NONE);
972 PIN_SLP(gpl0-1, INPUT, NONE);
973 PIN_SLP(gpl0-2, INPUT, NONE);
974 PIN_SLP(gpl0-3, INPUT, DOWN);
975 PIN_SLP(gpl0-4, PREV, NONE);
976 PIN_SLP(gpl0-6, PREV, NONE);
978 PIN_SLP(gpl1-0, OUT0, NONE);
979 PIN_SLP(gpl1-1, OUT0, NONE);
981 PIN_SLP(gpl2-0, INPUT, DOWN);
982 PIN_SLP(gpl2-1, INPUT, DOWN);
983 PIN_SLP(gpl2-2, INPUT, DOWN);
984 PIN_SLP(gpl2-3, INPUT, DOWN);
985 PIN_SLP(gpl2-4, OUT0, NONE);
986 PIN_SLP(gpl2-5, INPUT, DOWN);
987 PIN_SLP(gpl2-6, PREV, NONE);
988 PIN_SLP(gpl2-7, PREV, NONE);
990 PIN_SLP(gpm0-0, PREV, NONE);
991 PIN_SLP(gpm0-1, OUT0, NONE);
992 PIN_SLP(gpm0-2, INPUT, DOWN);
993 PIN_SLP(gpm0-3, INPUT, NONE);
994 PIN_SLP(gpm0-4, OUT0, NONE);
995 PIN_SLP(gpm0-5, OUT0, NONE);
996 PIN_SLP(gpm0-6, INPUT, DOWN);
997 PIN_SLP(gpm0-7, OUT0, NONE);
999 PIN_SLP(gpm1-0, INPUT, NONE);
1000 PIN_SLP(gpm1-1, INPUT, NONE);
1001 PIN_SLP(gpm1-2, INPUT, NONE);
1002 PIN_SLP(gpm1-3, INPUT, NONE);
1003 PIN_SLP(gpm1-4, INPUT, NONE);
1004 PIN_SLP(gpm1-5, INPUT, NONE);
1005 PIN_SLP(gpm1-6, INPUT, DOWN);
1007 PIN_SLP(gpm2-0, INPUT, NONE);
1008 PIN_SLP(gpm2-1, INPUT, NONE);
1009 PIN_SLP(gpm2-2, OUT0, NONE);
1010 PIN_SLP(gpm2-3, OUT0, DOWN);
1011 PIN_SLP(gpm2-4, INPUT, DOWN);
1013 PIN_SLP(gpm3-0, PREV, NONE);
1014 PIN_SLP(gpm3-1, PREV, NONE);
1015 PIN_SLP(gpm3-2, PREV, NONE);
1016 PIN_SLP(gpm3-3, OUT1, NONE);
1017 PIN_SLP(gpm3-4, OUT0, DOWN);
1018 PIN_SLP(gpm3-5, PREV, NONE);
1019 PIN_SLP(gpm3-6, PREV, NONE);
1020 PIN_SLP(gpm3-7, OUT0, NONE);
1022 PIN_SLP(gpm4-0, INPUT, NONE);
1023 PIN_SLP(gpm4-1, INPUT, NONE);
1024 PIN_SLP(gpm4-2, INPUT, DOWN);
1025 PIN_SLP(gpm4-3, INPUT, DOWN);
1026 PIN_SLP(gpm4-4, PREV, NONE);
1027 PIN_SLP(gpm4-5, OUT0, NONE);
1028 PIN_SLP(gpm4-6, OUT0, NONE);
1029 PIN_SLP(gpm4-7, INPUT, DOWN);
1031 PIN_SLP(gpy0-0, INPUT, DOWN);
1032 PIN_SLP(gpy0-1, INPUT, DOWN);
1033 PIN_SLP(gpy0-2, INPUT, NONE);
1034 PIN_SLP(gpy0-3, INPUT, NONE);
1035 PIN_SLP(gpy0-4, INPUT, NONE);
1036 PIN_SLP(gpy0-5, INPUT, NONE);
1038 PIN_SLP(gpy1-0, INPUT, DOWN);
1039 PIN_SLP(gpy1-1, INPUT, DOWN);
1040 PIN_SLP(gpy1-2, INPUT, DOWN);
1041 PIN_SLP(gpy1-3, INPUT, DOWN);
1043 PIN_SLP(gpy2-0, PREV, NONE);
1044 PIN_SLP(gpy2-1, INPUT, DOWN);
1045 PIN_SLP(gpy2-2, INPUT, NONE);
1046 PIN_SLP(gpy2-3, INPUT, NONE);
1047 PIN_SLP(gpy2-4, INPUT, NONE);
1048 PIN_SLP(gpy2-5, INPUT, NONE);
1050 PIN_SLP(gpy3-0, INPUT, DOWN);
1051 PIN_SLP(gpy3-1, INPUT, DOWN);
1052 PIN_SLP(gpy3-2, INPUT, DOWN);
1053 PIN_SLP(gpy3-3, INPUT, DOWN);
1054 PIN_SLP(gpy3-4, INPUT, DOWN);
1055 PIN_SLP(gpy3-5, INPUT, DOWN);
1056 PIN_SLP(gpy3-6, INPUT, DOWN);
1057 PIN_SLP(gpy3-7, INPUT, DOWN);
1059 PIN_SLP(gpy4-0, INPUT, DOWN);
1060 PIN_SLP(gpy4-1, INPUT, DOWN);
1061 PIN_SLP(gpy4-2, INPUT, DOWN);
1062 PIN_SLP(gpy4-3, INPUT, DOWN);
1063 PIN_SLP(gpy4-4, INPUT, DOWN);
1064 PIN_SLP(gpy4-5, INPUT, DOWN);
1065 PIN_SLP(gpy4-6, INPUT, DOWN);
1066 PIN_SLP(gpy4-7, INPUT, DOWN);
1068 PIN_SLP(gpy5-0, INPUT, DOWN);
1069 PIN_SLP(gpy5-1, INPUT, DOWN);
1070 PIN_SLP(gpy5-2, INPUT, DOWN);
1071 PIN_SLP(gpy5-3, INPUT, DOWN);
1072 PIN_SLP(gpy5-4, INPUT, DOWN);
1073 PIN_SLP(gpy5-5, INPUT, DOWN);
1074 PIN_SLP(gpy5-6, INPUT, DOWN);
1075 PIN_SLP(gpy5-7, INPUT, DOWN);
1077 PIN_SLP(gpy6-0, INPUT, DOWN);
1078 PIN_SLP(gpy6-1, INPUT, DOWN);
1079 PIN_SLP(gpy6-2, INPUT, DOWN);
1080 PIN_SLP(gpy6-3, INPUT, DOWN);
1081 PIN_SLP(gpy6-4, INPUT, DOWN);
1082 PIN_SLP(gpy6-5, INPUT, DOWN);
1083 PIN_SLP(gpy6-6, INPUT, DOWN);
1084 PIN_SLP(gpy6-7, INPUT, DOWN);
1089 pinctrl-names = "default";
1090 pinctrl-0 = <&sleep2>;
1092 sleep2: sleep-state {
1093 PIN_SLP(gpz-0, INPUT, DOWN);
1094 PIN_SLP(gpz-1, INPUT, DOWN);
1095 PIN_SLP(gpz-2, INPUT, DOWN);
1096 PIN_SLP(gpz-3, INPUT, DOWN);
1097 PIN_SLP(gpz-4, INPUT, DOWN);
1098 PIN_SLP(gpz-5, INPUT, DOWN);
1099 PIN_SLP(gpz-6, INPUT, DOWN);
1104 pinctrl-names = "default";
1105 pinctrl-0 = <&sleep3>;
1107 sleep3: sleep-state {
1108 PIN_SLP(gpv0-0, INPUT, DOWN);
1109 PIN_SLP(gpv0-1, INPUT, DOWN);
1110 PIN_SLP(gpv0-2, INPUT, DOWN);
1111 PIN_SLP(gpv0-3, INPUT, DOWN);
1112 PIN_SLP(gpv0-4, INPUT, DOWN);
1113 PIN_SLP(gpv0-5, INPUT, DOWN);
1114 PIN_SLP(gpv0-6, INPUT, DOWN);
1115 PIN_SLP(gpv0-7, INPUT, DOWN);
1117 PIN_SLP(gpv1-0, INPUT, DOWN);
1118 PIN_SLP(gpv1-1, INPUT, DOWN);
1119 PIN_SLP(gpv1-2, INPUT, DOWN);
1120 PIN_SLP(gpv1-3, INPUT, DOWN);
1121 PIN_SLP(gpv1-4, INPUT, DOWN);
1122 PIN_SLP(gpv1-5, INPUT, DOWN);
1123 PIN_SLP(gpv1-6, INPUT, DOWN);
1124 PIN_SLP(gpv1-7, INPUT, DOWN);
1126 PIN_SLP(gpv2-0, INPUT, DOWN);
1127 PIN_SLP(gpv2-1, INPUT, DOWN);
1128 PIN_SLP(gpv2-2, INPUT, DOWN);
1129 PIN_SLP(gpv2-3, INPUT, DOWN);
1130 PIN_SLP(gpv2-4, INPUT, DOWN);
1131 PIN_SLP(gpv2-5, INPUT, DOWN);
1132 PIN_SLP(gpv2-6, INPUT, DOWN);
1133 PIN_SLP(gpv2-7, INPUT, DOWN);
1135 PIN_SLP(gpv3-0, INPUT, DOWN);
1136 PIN_SLP(gpv3-1, INPUT, DOWN);
1137 PIN_SLP(gpv3-2, INPUT, DOWN);
1138 PIN_SLP(gpv3-3, INPUT, DOWN);
1139 PIN_SLP(gpv3-4, INPUT, DOWN);
1140 PIN_SLP(gpv3-5, INPUT, DOWN);
1141 PIN_SLP(gpv3-6, INPUT, DOWN);
1142 PIN_SLP(gpv3-7, INPUT, DOWN);
1144 PIN_SLP(gpv4-0, INPUT, DOWN);
1145 PIN_SLP(gpv4-1, INPUT, DOWN);
1150 assigned-clocks = <&pmu_system_controller 0>;
1151 assigned-clock-parents = <&clock CLK_XUSBXTI>;
1155 pinctrl-0 = <&pwm1_out>;
1156 pinctrl-names = "default";
1157 samsung,pwm-outputs = <1>;
1163 clock-names = "rtc", "rtc_src";
1168 bus-width = <4>;
1169 cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
1170 pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sdhci2_cd>;
1171 pinctrl-names = "default";
1172 vmmc-supply = <&ldo21_reg>;
1177 #address-cells = <1>;
1178 #size-cells = <0>;
1179 non-removable;
1180 bus-width = <4>;
1181 mmc-pwrseq = <&wlan_pwrseq>;
1183 pinctrl-names = "default";
1184 pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_wifi>;
1188 compatible = "brcm,bcm4329-fmac";
1190 pinctrl-names = "default";
1191 pinctrl-0 = <&wifi_host_wake>;
1192 interrupt-parent = <&gpx2>;
1194 interrupt-names = "host-wake";
1199 pinctrl-0 = <&uart0_data &uart0_fctl>;
1200 pinctrl-names = "default";
1204 compatible = "brcm,bcm4330-bt";
1205 pinctrl-0 = <&bt_shutdown &bt_device_wakeup &bt_host_wakeup>;
1206 pinctrl-names = "default";
1208 max-speed = <2000000>;
1209 shutdown-gpios = <&gpl0 6 GPIO_ACTIVE_HIGH>;
1210 device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>;
1211 host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>;
1213 clock-names = "lpo";
1218 pinctrl-0 = <&uart_sel>;
1219 pinctrl-names = "default";