Lines Matching +full:scl +full:- +full:open +full:- +full:drain
1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * at91sam9n12.dtsi - Device Tree include file for AT91SAM9N12 SoC
9 #include <dt-bindings/dma/at91.h>
10 #include <dt-bindings/pinctrl/at91.h>
11 #include <dt-bindings/interrupt-controller/irq.h>
12 #include <dt-bindings/gpio/gpio.h>
13 #include <dt-bindings/clock/at91.h>
14 #include <dt-bindings/mfd/at91-usart.h>
17 #address-cells = <1>;
18 #size-cells = <1>;
21 interrupt-parent = <&aic>;
41 #address-cells = <1>;
42 #size-cells = <0>;
45 compatible = "arm,arm926ej-s";
58 compatible = "fixed-clock";
59 #clock-cells = <0>;
60 clock-frequency = <0>;
64 compatible = "fixed-clock";
65 #clock-cells = <0>;
66 clock-frequency = <0>;
71 compatible = "mmio-sram";
73 #address-cells = <1>;
74 #size-cells = <1>;
79 compatible = "simple-bus";
80 #address-cells = <1>;
81 #size-cells = <1>;
85 compatible = "simple-bus";
86 #address-cells = <1>;
87 #size-cells = <1>;
90 aic: interrupt-controller@fffff000 {
91 #interrupt-cells = <3>;
92 compatible = "atmel,at91rm9200-aic";
93 interrupt-controller;
95 atmel,external-irqs = <31>;
99 compatible = "atmel,at91sam9n12-matrix", "syscon";
103 pmecc: ecc-engine@ffffe000 {
104 compatible = "atmel,at91sam9g45-pmecc";
110 compatible = "atmel,at91sam9g45-ddramc";
113 clock-names = "ddrck";
117 compatible = "atmel,at91sam9260-smc", "syscon";
122 compatible = "atmel,at91sam9n12-pmc", "syscon";
124 #clock-cells = <2>;
126 clock-names = "slow_clk", "main_xtal";
130 reset-controller@fffffe00 {
131 compatible = "atmel,at91sam9g45-rstc";
137 compatible = "atmel,at91sam9260-pit";
144 compatible = "atmel,at91sam9x5-shdwc";
150 compatible = "atmel,at91sam9x5-sckc";
154 compatible = "atmel,at91sam9x5-clk-slow-osc";
155 #clock-cells = <0>;
160 compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
161 #clock-cells = <0>;
162 clock-frequency = <32768>;
163 clock-accuracy = <50000000>;
167 compatible = "atmel,at91sam9x5-clk-slow";
168 #clock-cells = <0>;
178 dma-names = "rxtx";
180 clock-names = "mci_clk";
181 #address-cells = <1>;
182 #size-cells = <0>;
187 compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
188 #address-cells = <1>;
189 #size-cells = <0>;
193 clock-names = "t0_clk", "slow_clk";
197 compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
198 #address-cells = <1>;
199 #size-cells = <0>;
203 clock-names = "t0_clk", "slow_clk";
207 compatible = "atmel,at91sam9n12-hlcdc";
211 clock-names = "periph_clk", "sys_clk", "slow_clk";
214 hlcdc-display-controller {
215 compatible = "atmel,hlcdc-display-controller";
216 #address-cells = <1>;
217 #size-cells = <0>;
220 #address-cells = <1>;
221 #size-cells = <0>;
226 hlcdc_pwm: hlcdc-pwm {
227 compatible = "atmel,hlcdc-pwm";
228 pinctrl-names = "default";
229 pinctrl-0 = <&pinctrl_lcd_pwm>;
230 #pwm-cells = <3>;
234 dma: dma-controller@ffffec00 {
235 compatible = "atmel,at91sam9g45-dma";
238 #dma-cells = <2>;
240 clock-names = "dma_clk";
244 #address-cells = <1>;
245 #size-cells = <1>;
246 compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
249 atmel,mux-mask = <
259 pinctrl_dbgu: dbgu-0 {
267 pinctrl_lcd_base: lcd-base-0 {
276 pinctrl_lcd_pwm: lcd-pwm-0 {
280 pinctrl_lcd_rgb888: lcd-rgb-3 {
310 pinctrl_usart0: usart0-0 {
316 pinctrl_usart0_rts: usart0_rts-0 {
321 pinctrl_usart0_cts: usart0_cts-0 {
328 pinctrl_usart1: usart1-0 {
336 pinctrl_usart2: usart2-0 {
342 pinctrl_usart2_rts: usart2_rts-0 {
347 pinctrl_usart2_cts: usart2_cts-0 {
354 pinctrl_usart3: usart3-0 {
360 pinctrl_usart3_rts: usart3_rts-0 {
365 pinctrl_usart3_cts: usart3_cts-0 {
372 pinctrl_uart0: uart0-0 {
380 pinctrl_uart1: uart1-0 {
388 pinctrl_nand_rb: nand-rb-0 {
393 pinctrl_nand_cs: nand-cs-0 {
400 pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 {
407 pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
414 pinctrl_mmc0_slot0_dat4_7: mmc0_slot0_dat4_7-0 {
424 pinctrl_ssc0_tx: ssc0_tx-0 {
431 pinctrl_ssc0_rx: ssc0_rx-0 {
440 pinctrl_spi0: spi0-0 {
449 pinctrl_spi1: spi1-0 {
458 pinctrl_i2c0: i2c0-0 {
466 pinctrl_i2c1: i2c1-0 {
474 pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
478 pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
482 pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
486 pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
490 pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
494 pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
498 pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
502 pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
506 pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
512 pinctrl_tcb1_tclk0: tcb1_tclk0-0 {
516 pinctrl_tcb1_tclk1: tcb1_tclk1-0 {
520 pinctrl_tcb1_tclk2: tcb1_tclk2-0 {
524 pinctrl_tcb1_tioa0: tcb1_tioa0-0 {
528 pinctrl_tcb1_tioa1: tcb1_tioa1-0 {
532 pinctrl_tcb1_tioa2: tcb1_tioa2-0 {
536 pinctrl_tcb1_tiob0: tcb1_tiob0-0 {
540 pinctrl_tcb1_tiob1: tcb1_tiob1-0 {
544 pinctrl_tcb1_tiob2: tcb1_tiob2-0 {
550 compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
553 #gpio-cells = <2>;
554 gpio-controller;
555 interrupt-controller;
556 #interrupt-cells = <2>;
561 compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
564 #gpio-cells = <2>;
565 gpio-controller;
566 interrupt-controller;
567 #interrupt-cells = <2>;
572 compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
575 #gpio-cells = <2>;
576 gpio-controller;
577 interrupt-controller;
578 #interrupt-cells = <2>;
583 compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
586 #gpio-cells = <2>;
587 gpio-controller;
588 interrupt-controller;
589 #interrupt-cells = <2>;
595 compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
597 atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
599 pinctrl-names = "default";
600 pinctrl-0 = <&pinctrl_dbgu>;
602 clock-names = "usart";
607 compatible = "atmel,at91sam9g45-ssc";
612 dma-names = "tx", "rx";
613 pinctrl-names = "default";
614 pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
616 clock-names = "pclk";
621 compatible = "atmel,at91sam9260-usart";
623 atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
625 pinctrl-names = "default";
626 pinctrl-0 = <&pinctrl_usart0>;
628 clock-names = "usart";
633 compatible = "atmel,at91sam9260-usart";
635 atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
637 pinctrl-names = "default";
638 pinctrl-0 = <&pinctrl_usart1>;
640 clock-names = "usart";
645 compatible = "atmel,at91sam9260-usart";
647 atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
649 pinctrl-names = "default";
650 pinctrl-0 = <&pinctrl_usart2>;
652 clock-names = "usart";
657 compatible = "atmel,at91sam9260-usart";
659 atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
661 pinctrl-names = "default";
662 pinctrl-0 = <&pinctrl_usart3>;
664 clock-names = "usart";
669 compatible = "atmel,at91sam9x5-i2c";
674 dma-names = "tx", "rx";
675 #address-cells = <1>;
676 #size-cells = <0>;
677 pinctrl-names = "default";
678 pinctrl-0 = <&pinctrl_i2c0>;
684 compatible = "atmel,at91sam9x5-i2c";
689 dma-names = "tx", "rx";
690 #address-cells = <1>;
691 #size-cells = <0>;
692 pinctrl-names = "default";
693 pinctrl-0 = <&pinctrl_i2c1>;
699 #address-cells = <1>;
700 #size-cells = <0>;
701 compatible = "atmel,at91rm9200-spi";
706 dma-names = "tx", "rx";
707 pinctrl-names = "default";
708 pinctrl-0 = <&pinctrl_spi0>;
710 clock-names = "spi_clk";
715 #address-cells = <1>;
716 #size-cells = <0>;
717 compatible = "atmel,at91rm9200-spi";
722 dma-names = "tx", "rx";
723 pinctrl-names = "default";
724 pinctrl-0 = <&pinctrl_spi1>;
726 clock-names = "spi_clk";
731 compatible = "atmel,at91sam9260-wdt";
735 atmel,watchdog-type = "hardware";
736 atmel,reset-type = "all";
737 atmel,dbg-halt;
742 compatible = "atmel,at91rm9200-rtc";
750 compatible = "atmel,at91sam9rl-pwm";
753 #pwm-cells = <3>;
759 compatible = "atmel,at91sam9260-udc";
763 clock-names = "pclk", "hclk";
769 compatible = "atmel,at91rm9200-ohci", "usb-ohci";
773 clock-names = "ohci_clk", "hclk", "uhpck";
778 compatible = "atmel,at91sam9x5-ebi";
779 #address-cells = <2>;
780 #size-cells = <1>;
793 nand_controller: nand-controller {
794 compatible = "atmel,at91sam9g45-nand-controller";
795 ecc-engine = <&pmecc>;
796 #address-cells = <2>;
797 #size-cells = <1>;
804 i2c-gpio-0 {
805 compatible = "i2c-gpio";
807 &pioA 31 GPIO_ACTIVE_HIGH /* scl */
809 i2c-gpio,sda-open-drain;
810 i2c-gpio,scl-open-drain;
811 i2c-gpio,delay-us = <2>; /* ~100 kHz */
812 #address-cells = <1>;
813 #size-cells = <0>;