Lines Matching +full:vddana +full:- +full:supply
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 * at91-sama5d27_som1_ek.dts - Device Tree file for SAMA5D27-SOM1-EK board
10 /dts-v1/;
11 #include "at91-sama5d27_som1.dtsi"
12 #include <dt-bindings/mfd/atmel-flexcom.h>
13 #include <dt-bindings/gpio/gpio.h>
14 #include <dt-bindings/input/input.h>
18 …compatible = "atmel,sama5d27-som1-ek", "atmel,sama5d27-som1", "atmel,sama5d27", "atmel,sama5d2", "…
29 stdout-path = "serial0:115200n8";
34 atmel,vbus-gpio = <&pioA PIN_PD20 GPIO_ACTIVE_HIGH>;
35 pinctrl-names = "default";
36 pinctrl-0 = <&pinctrl_usba_vbus>;
41 num-ports = <3>;
42 atmel,vbus-gpio = <0 /* &pioA PIN_PD20 GPIO_ACTIVE_HIGH */
46 pinctrl-names = "default";
47 pinctrl-0 = <&pinctrl_usb_default>;
55 sdmmc0: sdio-host@a0000000 {
56 bus-width = <8>;
57 mmc-ddr-3_3v;
58 pinctrl-names = "default";
59 pinctrl-0 = <&pinctrl_sdmmc0_default>;
63 sdmmc1: sdio-host@b0000000 {
64 bus-width = <4>;
65 pinctrl-names = "default";
66 pinctrl-0 = <&pinctrl_sdmmc1_default>;
72 pinctrl-names = "default";
73 …pinctrl-0 = <&pinctrl_isc_base &pinctrl_isc_data_8bit &pinctrl_isc_data_9_10 &pinctrl_isc_data_11_…
81 pinctrl-names = "default";
82 pinctrl-0 = <&pinctrl_spi0_default>;
92 compatible = "atmel,tcb-timer";
97 compatible = "atmel,tcb-timer";
103 pinctrl-names = "default";
104 pinctrl-0 = <&pinctrl_uart1_default>;
105 atmel,use-dma-rx;
106 atmel,use-dma-tx;
111 pinctrl-names = "default";
112 pinctrl-0 = <&pinctrl_mikrobus2_uart>;
113 atmel,use-dma-rx;
114 atmel,use-dma-tx;
119 pinctrl-names = "default";
120 pinctrl-0 = <&pinctrl_mikrobus1_pwm &pinctrl_mikrobus2_pwm>;
125 atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
130 i2c-analog-filter;
131 i2c-digital-filter;
132 i2c-digital-filter-width-ns = <35>;
133 pinctrl-names = "default", "gpio";
134 pinctrl-0 = <&pinctrl_mikrobus_i2c>;
135 pinctrl-1 = <&pinctrl_i2c3_gpio>;
136 sda-gpios = <&pioA PIN_PA24 GPIO_ACTIVE_HIGH>;
137 scl-gpios = <&pioA PIN_PA23 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
143 debounce-delay-us = <976>;
144 atmel,wakeup-rtc-timer;
156 atmel,use-dma-rx;
157 atmel,use-dma-tx;
158 pinctrl-names = "default";
159 pinctrl-0 = <&pinctrl_uart3_default>;
164 atmel,use-dma-rx;
165 atmel,use-dma-tx;
166 pinctrl-names = "default";
167 pinctrl-0 = <&pinctrl_mikrobus1_uart>;
172 atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
177 pinctrl-names = "default";
178 pinctrl-0 = <&pinctrl_flx3_default>;
184 pinctrl-names = "default";
185 pinctrl-0 = <&pinctrl_flx3_default>;
191 atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
196 pinctrl-names = "default";
197 pinctrl-0 = <&pinctrl_flx4_default>;
203 pinctrl-names = "default";
204 pinctrl-0 = <&pinctrl_mikrobus_spi &pinctrl_mikrobus1_spi_cs &pinctrl_mikrobus2_spi_cs>;
210 pinctrl-names = "default";
211 pinctrl-0 = <&pinctrl_flx4_default>;
218 i2c-analog-filter;
219 i2c-digital-filter;
220 i2c-digital-filter-width-ns = <35>;
221 pinctrl-names = "default", "gpio";
222 pinctrl-0 = <&pinctrl_i2c1_default>;
223 pinctrl-1 = <&pinctrl_i2c1_gpio>;
224 sda-gpios = <&pioA PIN_PD4 GPIO_ACTIVE_HIGH>;
225 scl-gpios = <&pioA PIN_PD5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
230 vddana-supply = <&vddana>;
231 vref-supply = <&advref>;
232 pinctrl-names = "default";
233 pinctrl-0 = <&pinctrl_mikrobus1_an &pinctrl_mikrobus2_an>;
243 bias-disable;
252 bias-disable;
258 bias-disable;
264 bias-disable;
273 bias-disable;
285 bias-disable;
291 bias-disable;
297 bias-disable;
302 bias-pull-up;
309 bias-pull-up;
323 bias-disable;
330 bias-disable;
341 bias-disable;
344 conf-ck_cd {
347 bias-disable;
356 bias-disable;
362 bias-disable;
368 bias-disable;
374 bias-disable;
379 bias-disable;
384 bias-disable;
389 bias-disable;
394 bias-disable;
399 bias-disable;
404 bias-disable;
409 bias-disable;
416 bias-disable;
421 bias-disable;
426 bias-disable;
431 bias-disable;
436 bias-disable;
442 bias-disable;
448 bias-disable;
454 bias-disable;
460 bias-disable;
469 bias-disable;
474 pinctrl-names = "default";
475 pinctrl-0 = <&pinctrl_can1_default>;
481 gpio-keys {
482 compatible = "gpio-keys";
484 pinctrl-names = "default";
485 pinctrl-0 = <&pinctrl_key_gpio_default>;
491 wakeup-source;
496 compatible = "gpio-leds";
497 pinctrl-names = "default";
498 pinctrl-0 = <&pinctrl_led_gpio_default>;
514 linux,default-trigger = "heartbeat";
518 vddin_3v3: fixed-regulator-vddin_3v3 {
519 compatible = "regulator-fixed";
521 regulator-name = "VDDIN_3V3";
522 regulator-min-microvolt = <3300000>;
523 regulator-max-microvolt = <3300000>;
524 regulator-always-on;
525 regulator-boot-on;
529 vddana: fixed-regulator-vddana { label
530 compatible = "regulator-fixed";
532 regulator-name = "VDDANA";
533 regulator-min-microvolt = <3300000>;
534 regulator-max-microvolt = <3300000>;
535 regulator-always-on;
536 regulator-boot-on;
537 vin-supply = <&vddin_3v3>;
541 advref: fixed-regulator-advref {
542 compatible = "regulator-fixed";
544 regulator-name = "advref";
545 regulator-min-microvolt = <3300000>;
546 regulator-max-microvolt = <3300000>;
547 regulator-always-on;
548 regulator-boot-on;
549 vin-supply = <&vddana>;