Lines Matching +full:ast2600 +full:- +full:scu
1 // SPDX-License-Identifier: GPL-2.0-or-later
4 #include <dt-bindings/interrupt-controller/arm-gic.h>
5 #include <dt-bindings/interrupt-controller/aspeed-scu-ic.h>
6 #include <dt-bindings/clock/ast2600-clock.h>
10 compatible = "aspeed,ast2600";
11 #address-cells = <1>;
12 #size-cells = <1>;
13 interrupt-parent = <&gic>;
43 #address-cells = <1>;
44 #size-cells = <0>;
45 enable-method = "aspeed,ast2600-smp";
48 compatible = "arm,cortex-a7";
54 compatible = "arm,cortex-a7";
61 compatible = "arm,armv7-timer";
62 interrupt-parent = <&gic>;
68 arm,cpu-registers-not-fw-configured;
69 always-on;
73 compatible = "aspeed,ast2600-sdram-edac", "syscon";
79 compatible = "simple-bus";
80 #address-cells = <1>;
81 #size-cells = <1>;
85 gic: interrupt-controller@40461000 {
86 compatible = "arm,cortex-a7-gic";
88 #interrupt-cells = <3>;
89 interrupt-controller;
90 interrupt-parent = <&gic>;
99 #address-cells = <1>;
100 #size-cells = <0>;
101 compatible = "aspeed,ast2600-fmc";
107 compatible = "jedec,spi-nor";
108 spi-max-frequency = <50000000>;
109 spi-rx-bus-width = <2>;
114 compatible = "jedec,spi-nor";
115 spi-max-frequency = <50000000>;
116 spi-rx-bus-width = <2>;
121 compatible = "jedec,spi-nor";
122 spi-max-frequency = <50000000>;
123 spi-rx-bus-width = <2>;
130 #address-cells = <1>;
131 #size-cells = <0>;
132 compatible = "aspeed,ast2600-spi";
137 compatible = "jedec,spi-nor";
138 spi-max-frequency = <50000000>;
139 spi-rx-bus-width = <2>;
144 compatible = "jedec,spi-nor";
145 spi-max-frequency = <50000000>;
146 spi-rx-bus-width = <2>;
153 #address-cells = <1>;
154 #size-cells = <0>;
155 compatible = "aspeed,ast2600-spi";
160 compatible = "jedec,spi-nor";
161 spi-max-frequency = <50000000>;
162 spi-rx-bus-width = <2>;
167 compatible = "jedec,spi-nor";
168 spi-max-frequency = <50000000>;
169 spi-rx-bus-width = <2>;
174 compatible = "jedec,spi-nor";
175 spi-max-frequency = <50000000>;
176 spi-rx-bus-width = <2>;
182 compatible = "aspeed,ast2600-mdio";
184 #address-cells = <1>;
185 #size-cells = <0>;
187 pinctrl-names = "default";
188 pinctrl-0 = <&pinctrl_mdio1_default>;
193 compatible = "aspeed,ast2600-mdio";
195 #address-cells = <1>;
196 #size-cells = <0>;
198 pinctrl-names = "default";
199 pinctrl-0 = <&pinctrl_mdio2_default>;
204 compatible = "aspeed,ast2600-mdio";
206 #address-cells = <1>;
207 #size-cells = <0>;
209 pinctrl-names = "default";
210 pinctrl-0 = <&pinctrl_mdio3_default>;
215 compatible = "aspeed,ast2600-mdio";
217 #address-cells = <1>;
218 #size-cells = <0>;
220 pinctrl-names = "default";
221 pinctrl-0 = <&pinctrl_mdio4_default>;
226 compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
228 #address-cells = <1>;
229 #size-cells = <0>;
236 compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
238 #address-cells = <1>;
239 #size-cells = <0>;
246 compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
248 #address-cells = <1>;
249 #size-cells = <0>;
256 compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
258 #address-cells = <1>;
259 #size-cells = <0>;
266 compatible = "aspeed,ast2600-ehci", "generic-ehci";
270 pinctrl-names = "default";
271 pinctrl-0 = <&pinctrl_usb2ah_default>;
276 compatible = "aspeed,ast2600-ehci", "generic-ehci";
280 pinctrl-names = "default";
281 pinctrl-0 = <&pinctrl_usb2bh_default>;
286 compatible = "aspeed,ast2600-uhci", "generic-uhci";
298 vhub: usb-vhub@1e6a0000 {
299 compatible = "aspeed,ast2600-usb-vhub";
303 aspeed,vhub-downstream-ports = <7>;
304 aspeed,vhub-generic-endpoints = <21>;
305 pinctrl-names = "default";
306 pinctrl-0 = <&pinctrl_usb2ad_default>;
311 compatible = "aspeed,ast2600-udc";
315 pinctrl-names = "default";
316 pinctrl-0 = <&pinctrl_usb2bd_default>;
321 compatible = "simple-bus";
322 #address-cells = <1>;
323 #size-cells = <1>;
327 compatible = "aspeed,ast2600-hace";
335 compatible = "aspeed,ast2600-scu", "syscon", "simple-mfd";
338 #address-cells = <1>;
339 #size-cells = <1>;
340 #clock-cells = <1>;
341 #reset-cells = <1>;
344 compatible = "aspeed,ast2600-pinctrl";
347 silicon-id@14 {
348 compatible = "aspeed,ast2600-silicon-id", "aspeed,silicon-id";
352 smp-memram@180 {
353 compatible = "aspeed,ast2600-smpmem";
357 scu_ic0: interrupt-controller@560 {
358 #interrupt-cells = <1>;
359 compatible = "aspeed,ast2600-scu-ic0";
362 interrupt-controller;
365 scu_ic1: interrupt-controller@570 {
366 #interrupt-cells = <1>;
367 compatible = "aspeed,ast2600-scu-ic1";
370 interrupt-controller;
382 compatible = "aspeed,ast2600-gfx", "syscon";
384 reg-io-width = <4>;
393 compatible = "aspeed,ast2600-xdma";
397 reset-names = "device", "root-complex";
398 interrupts-extended = <&gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
400 aspeed,pcie-device = "bmc";
401 aspeed,scu = <&syscon>;
406 compatible = "aspeed,ast2600-adc0";
411 #io-channel-cells = <1>;
416 compatible = "aspeed,ast2600-adc1";
421 #io-channel-cells = <1>;
425 sbc: secure-boot-controller@1e6f2000 {
426 compatible = "aspeed,ast2600-sbc";
431 compatible = "aspeed,ast2600-video-engine";
435 clock-names = "vclk", "eclk";
441 #gpio-cells = <2>;
442 gpio-controller;
443 compatible = "aspeed,ast2600-gpio";
446 gpio-ranges = <&pinctrl 0 0 208>;
449 interrupt-controller;
450 #interrupt-cells = <2>;
454 #gpio-cells = <2>;
455 gpio-controller;
456 compatible = "aspeed,ast2600-sgpiom";
460 interrupt-controller;
461 bus-frequency = <12000000>;
462 pinctrl-names = "default";
463 pinctrl-0 = <&pinctrl_sgpm1_default>;
468 #gpio-cells = <2>;
469 gpio-controller;
470 compatible = "aspeed,ast2600-sgpiom";
474 interrupt-controller;
475 bus-frequency = <12000000>;
476 pinctrl-names = "default";
477 pinctrl-0 = <&pinctrl_sgpm2_default>;
482 #gpio-cells = <2>;
483 gpio-controller;
484 compatible = "aspeed,ast2600-gpio";
487 gpio-ranges = <&pinctrl 0 208 36>;
490 interrupt-controller;
491 #interrupt-cells = <2>;
495 compatible = "aspeed,ast2600-rtc";
502 compatible = "aspeed,ast2600-timer";
504 interrupts-extended = <&gic GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
513 clock-names = "PCLK";
520 reg-shift = <2>;
521 reg-io-width = <4>;
525 no-loopback-test;
526 pinctrl-names = "default";
527 pinctrl-0 = <&pinctrl_txd1_default &pinctrl_rxd1_default>;
534 reg-shift = <2>;
537 no-loopback-test;
541 compatible = "aspeed,ast2600-wdt";
546 compatible = "aspeed,ast2600-wdt";
552 compatible = "aspeed,ast2600-wdt";
558 compatible = "aspeed,ast2600-wdt";
563 peci0: peci-controller@1e78b000 {
564 compatible = "aspeed,ast2600-peci";
569 cmd-timeout-ms = <1000>;
570 clock-frequency = <1000000>;
575 compatible = "aspeed,ast2600-lpc-v2", "simple-mfd", "syscon";
577 reg-io-width = <4>;
579 #address-cells = <1>;
580 #size-cells = <1>;
584 compatible = "aspeed,ast2500-kcs-bmc-v2";
593 compatible = "aspeed,ast2500-kcs-bmc-v2";
601 compatible = "aspeed,ast2500-kcs-bmc-v2";
609 compatible = "aspeed,ast2500-kcs-bmc-v2";
616 lpc_ctrl: lpc-ctrl@80 {
617 compatible = "aspeed,ast2600-lpc-ctrl";
623 lpc_snoop: lpc-snoop@80 {
624 compatible = "aspeed,ast2600-lpc-snoop";
632 compatible = "aspeed,ast2600-lhc";
636 lpc_reset: reset-controller@98 {
637 compatible = "aspeed,ast2600-lpc-reset";
639 #reset-cells = <1>;
642 uart_routing: uart-routing@98 {
643 compatible = "aspeed,ast2600-uart-routing";
649 compatible = "aspeed,ast2600-ibt-bmc";
658 compatible = "aspeed,ast2600-sd-controller";
660 #address-cells = <1>;
661 #size-cells = <1>;
667 compatible = "aspeed,ast2600-sdhci", "sdhci";
670 sdhci,auto-cmd12;
676 compatible = "aspeed,ast2600-sdhci", "sdhci";
679 sdhci,auto-cmd12;
686 compatible = "aspeed,ast2600-sd-controller";
688 #address-cells = <1>;
689 #size-cells = <1>;
695 compatible = "aspeed,ast2600-sdhci";
697 sdhci,auto-cmd12;
700 pinctrl-names = "default";
701 pinctrl-0 = <&pinctrl_emmc_default>;
706 compatible = "aspeed,ast2500-vuart";
708 reg-shift = <2>;
711 no-loopback-test;
716 compatible = "aspeed,ast2500-vuart";
718 reg-shift = <2>;
721 no-loopback-test;
728 reg-shift = <2>;
729 reg-io-width = <4>;
733 no-loopback-test;
734 pinctrl-names = "default";
735 pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
742 reg-shift = <2>;
743 reg-io-width = <4>;
747 no-loopback-test;
748 pinctrl-names = "default";
749 pinctrl-0 = <&pinctrl_txd3_default &pinctrl_rxd3_default>;
756 reg-shift = <2>;
757 reg-io-width = <4>;
761 no-loopback-test;
762 pinctrl-names = "default";
763 pinctrl-0 = <&pinctrl_txd4_default &pinctrl_rxd4_default>;
770 reg-shift = <2>;
771 reg-io-width = <4>;
774 no-loopback-test;
775 pinctrl-names = "default";
776 pinctrl-0 = <&pinctrl_uart6_default>;
784 reg-shift = <2>;
785 reg-io-width = <4>;
788 no-loopback-test;
789 pinctrl-names = "default";
790 pinctrl-0 = <&pinctrl_uart7_default>;
798 reg-shift = <2>;
799 reg-io-width = <4>;
802 no-loopback-test;
803 pinctrl-names = "default";
804 pinctrl-0 = <&pinctrl_uart8_default>;
812 reg-shift = <2>;
813 reg-io-width = <4>;
816 no-loopback-test;
817 pinctrl-names = "default";
818 pinctrl-0 = <&pinctrl_uart9_default>;
824 compatible = "simple-bus";
825 #address-cells = <1>;
826 #size-cells = <1>;
831 compatible = "aspeed,ast2600-fsi-master", "fsi-master";
834 pinctrl-names = "default";
835 pinctrl-0 = <&pinctrl_fsi1_default>;
841 compatible = "aspeed,ast2600-fsi-master", "fsi-master";
844 pinctrl-names = "default";
845 pinctrl-0 = <&pinctrl_fsi2_default>;
853 #include "aspeed-g6-pinctrl.dtsi"
856 i2c0: i2c-bus@80 {
857 #address-cells = <1>;
858 #size-cells = <0>;
859 #interrupt-cells = <1>;
861 compatible = "aspeed,ast2600-i2c-bus";
865 bus-frequency = <100000>;
866 pinctrl-names = "default";
867 pinctrl-0 = <&pinctrl_i2c1_default>;
871 i2c1: i2c-bus@100 {
872 #address-cells = <1>;
873 #size-cells = <0>;
874 #interrupt-cells = <1>;
876 compatible = "aspeed,ast2600-i2c-bus";
880 bus-frequency = <100000>;
881 pinctrl-names = "default";
882 pinctrl-0 = <&pinctrl_i2c2_default>;
886 i2c2: i2c-bus@180 {
887 #address-cells = <1>;
888 #size-cells = <0>;
889 #interrupt-cells = <1>;
891 compatible = "aspeed,ast2600-i2c-bus";
895 bus-frequency = <100000>;
896 pinctrl-names = "default";
897 pinctrl-0 = <&pinctrl_i2c3_default>;
901 i2c3: i2c-bus@200 {
902 #address-cells = <1>;
903 #size-cells = <0>;
904 #interrupt-cells = <1>;
906 compatible = "aspeed,ast2600-i2c-bus";
910 bus-frequency = <100000>;
911 pinctrl-names = "default";
912 pinctrl-0 = <&pinctrl_i2c4_default>;
916 i2c4: i2c-bus@280 {
917 #address-cells = <1>;
918 #size-cells = <0>;
919 #interrupt-cells = <1>;
921 compatible = "aspeed,ast2600-i2c-bus";
925 bus-frequency = <100000>;
926 pinctrl-names = "default";
927 pinctrl-0 = <&pinctrl_i2c5_default>;
931 i2c5: i2c-bus@300 {
932 #address-cells = <1>;
933 #size-cells = <0>;
934 #interrupt-cells = <1>;
936 compatible = "aspeed,ast2600-i2c-bus";
940 bus-frequency = <100000>;
941 pinctrl-names = "default";
942 pinctrl-0 = <&pinctrl_i2c6_default>;
946 i2c6: i2c-bus@380 {
947 #address-cells = <1>;
948 #size-cells = <0>;
949 #interrupt-cells = <1>;
951 compatible = "aspeed,ast2600-i2c-bus";
955 bus-frequency = <100000>;
956 pinctrl-names = "default";
957 pinctrl-0 = <&pinctrl_i2c7_default>;
961 i2c7: i2c-bus@400 {
962 #address-cells = <1>;
963 #size-cells = <0>;
964 #interrupt-cells = <1>;
966 compatible = "aspeed,ast2600-i2c-bus";
970 bus-frequency = <100000>;
971 pinctrl-names = "default";
972 pinctrl-0 = <&pinctrl_i2c8_default>;
976 i2c8: i2c-bus@480 {
977 #address-cells = <1>;
978 #size-cells = <0>;
979 #interrupt-cells = <1>;
981 compatible = "aspeed,ast2600-i2c-bus";
985 bus-frequency = <100000>;
986 pinctrl-names = "default";
987 pinctrl-0 = <&pinctrl_i2c9_default>;
991 i2c9: i2c-bus@500 {
992 #address-cells = <1>;
993 #size-cells = <0>;
994 #interrupt-cells = <1>;
996 compatible = "aspeed,ast2600-i2c-bus";
1000 bus-frequency = <100000>;
1001 pinctrl-names = "default";
1002 pinctrl-0 = <&pinctrl_i2c10_default>;
1006 i2c10: i2c-bus@580 {
1007 #address-cells = <1>;
1008 #size-cells = <0>;
1009 #interrupt-cells = <1>;
1011 compatible = "aspeed,ast2600-i2c-bus";
1015 bus-frequency = <100000>;
1016 pinctrl-names = "default";
1017 pinctrl-0 = <&pinctrl_i2c11_default>;
1021 i2c11: i2c-bus@600 {
1022 #address-cells = <1>;
1023 #size-cells = <0>;
1024 #interrupt-cells = <1>;
1026 compatible = "aspeed,ast2600-i2c-bus";
1030 bus-frequency = <100000>;
1031 pinctrl-names = "default";
1032 pinctrl-0 = <&pinctrl_i2c12_default>;
1036 i2c12: i2c-bus@680 {
1037 #address-cells = <1>;
1038 #size-cells = <0>;
1039 #interrupt-cells = <1>;
1041 compatible = "aspeed,ast2600-i2c-bus";
1045 bus-frequency = <100000>;
1046 pinctrl-names = "default";
1047 pinctrl-0 = <&pinctrl_i2c13_default>;
1051 i2c13: i2c-bus@700 {
1052 #address-cells = <1>;
1053 #size-cells = <0>;
1054 #interrupt-cells = <1>;
1056 compatible = "aspeed,ast2600-i2c-bus";
1060 bus-frequency = <100000>;
1061 pinctrl-names = "default";
1062 pinctrl-0 = <&pinctrl_i2c14_default>;
1066 i2c14: i2c-bus@780 {
1067 #address-cells = <1>;
1068 #size-cells = <0>;
1069 #interrupt-cells = <1>;
1071 compatible = "aspeed,ast2600-i2c-bus";
1075 bus-frequency = <100000>;
1076 pinctrl-names = "default";
1077 pinctrl-0 = <&pinctrl_i2c15_default>;
1081 i2c15: i2c-bus@800 {
1082 #address-cells = <1>;
1083 #size-cells = <0>;
1084 #interrupt-cells = <1>;
1086 compatible = "aspeed,ast2600-i2c-bus";
1090 bus-frequency = <100000>;
1091 pinctrl-names = "default";
1092 pinctrl-0 = <&pinctrl_i2c16_default>;