Lines Matching +full:elm +full:- +full:id
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /* SPDX-FileCopyrightText: Alexander Shiyan, <shc_work@mail.ru> */
5 /* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ */
7 /dts-v1/;
11 #include <dt-bindings/interrupt-controller/irq.h>
12 #include <dt-bindings/leds/common.h>
15 model = "MYIR MYC-AM335X";
16 compatible = "myir,myc-am335x", "ti,am33xx";
20 cpu0-supply = <&vdd_core>;
21 voltage-tolerance = <2>;
31 compatible = "fixed-clock";
32 clock-frequency = <32768>;
34 #clock-cells = <0>;
38 compatible = "regulator-fixed";
39 regulator-name = "vdd-mod";
40 regulator-always-on;
41 regulator-boot-on;
45 compatible = "regulator-fixed";
46 regulator-name = "vdd-core";
47 regulator-always-on;
48 regulator-boot-on;
49 vin-supply = <&vdd_mod>;
53 compatible = "gpio-leds";
54 pinctrl-names = "default";
55 pinctrl-0 = <&led_mod_pins>;
61 default-state = "off";
62 panic-indicator;
68 pinctrl-names = "default", "sleep";
69 pinctrl-0 = <ð_slave1_pins_default>;
70 pinctrl-1 = <ð_slave1_pins_sleep>;
75 phy-handle = <&phy0>;
76 phy-mode = "rgmii-id";
77 ti,dual-emac-pvid = <1>;
85 pinctrl-names = "default", "sleep";
86 pinctrl-0 = <&mdio_pins_default>;
87 pinctrl-1 = <&mdio_pins_sleep>;
89 phy0: ethernet-phy@4 {
94 &elm {
99 pinctrl-names = "default", "sleep";
100 pinctrl-0 = <&nand_pins_default>;
101 pinctrl-1 = <&nand_pins_sleep>;
106 compatible = "ti,omap2-nand";
108 interrupt-parent = <&gpmc>;
110 nand-bus-width = <8>;
111 rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>;
112 gpmc,device-width = <1>;
113 gpmc,sync-clk-ps = <0>;
114 gpmc,cs-on-ns = <0>;
115 gpmc,cs-rd-off-ns = <44>;
116 gpmc,cs-wr-off-ns = <44>;
117 gpmc,adv-on-ns = <6>;
118 gpmc,adv-rd-off-ns = <34>;
119 gpmc,adv-wr-off-ns = <44>;
120 gpmc,we-on-ns = <0>;
121 gpmc,we-off-ns = <40>;
122 gpmc,oe-on-ns = <0>;
123 gpmc,oe-off-ns = <54>;
124 gpmc,access-ns = <64>;
125 gpmc,rd-cycle-ns = <82>;
126 gpmc,wr-cycle-ns = <82>;
127 gpmc,bus-turnaround-ns = <0>;
128 gpmc,cycle2cycle-delay-ns = <0>;
129 gpmc,clk-activation-ns = <0>;
130 gpmc,wr-access-ns = <40>;
131 gpmc,wr-data-mux-bus-ns = <0>;
132 ti,elm-id = <&elm>;
133 ti,nand-ecc-opt = "bch8";
138 pinctrl-names = "default", "gpio", "sleep";
139 pinctrl-0 = <&i2c0_pins_default>;
140 pinctrl-1 = <&i2c0_pins_gpio>;
141 pinctrl-2 = <&i2c0_pins_sleep>;
142 clock-frequency = <400000>;
143 scl-gpios = <&gpio3 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
144 sda-gpios = <&gpio3 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
151 vcc-supply = <&vdd_mod>;
157 clock-names = "ext-clk";
158 system-power-controller;
163 pinctrl-single,pins = <
170 pinctrl-single,pins = <
177 pinctrl-single,pins = <
194 pinctrl-single,pins = <
211 pinctrl-single,pins = <
218 pinctrl-single,pins = <
225 pinctrl-single,pins = <
232 pinctrl-single,pins = <
238 pinctrl-single,pins = <
258 pinctrl-single,pins = <