Lines Matching +full:power +full:- +full:delivery

1 .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
3 .. _frontend-stat-properties:
12 For most delivery systems, ``dtv_property.stat.len`` will be 1 if the
16 It should be noted, however, that new OFDM delivery systems like ISDB
22 So, in order to be consistent with other delivery systems, the first
32 -  ``svalue`` or ``uvalue``, where ``svalue`` is for signed values of
36 -  ``scale`` - Scale for the value. It can be:
38    -  ``FE_SCALE_NOT_AVAILABLE`` - The parameter is supported by the
42    -  ``FE_SCALE_DECIBEL`` - parameter is a signed value, measured in
45    -  ``FE_SCALE_RELATIVE`` - parameter is a unsigned value, where 0
48    -  ``FE_SCALE_COUNTER`` - parameter is a unsigned value that counts
53 .. _DTV-STAT-SIGNAL-STRENGTH:
63 -  ``FE_SCALE_NOT_AVAILABLE`` - it failed to measure it, or the
66 -  ``FE_SCALE_DECIBEL`` - signal strength is in 0.001 dBm units, power
69 -  ``FE_SCALE_RELATIVE`` - The frontend provides a 0% to 100%
70    measurement for power (actually, 0 to 65535).
73 .. _DTV-STAT-CNR:
82 -  ``FE_SCALE_NOT_AVAILABLE`` - it failed to measure it, or the
85 -  ``FE_SCALE_DECIBEL`` - Signal/Noise ratio is in 0.001 dB units.
87 -  ``FE_SCALE_RELATIVE`` - The frontend provides a 0% to 100%
91 .. _DTV-STAT-PRE-ERROR-BIT-COUNT:
105 :ref:`DTV_STAT_PRE_TOTAL_BIT_COUNT <DTV-STAT-PRE-TOTAL-BIT-COUNT>`.
113 -  ``FE_SCALE_NOT_AVAILABLE`` - it failed to measure it, or the
116 -  ``FE_SCALE_COUNTER`` - Number of error bits counted before the inner
120 .. _DTV-STAT-PRE-TOTAL-BIT-COUNT:
127 :ref:`DTV_STAT_PRE_ERROR_BIT_COUNT <DTV-STAT-PRE-ERROR-BIT-COUNT>`
141 -  ``FE_SCALE_NOT_AVAILABLE`` - it failed to measure it, or the
144 -  ``FE_SCALE_COUNTER`` - Number of bits counted while measuring
145    :ref:`DTV_STAT_PRE_ERROR_BIT_COUNT <DTV-STAT-PRE-ERROR-BIT-COUNT>`.
148 .. _DTV-STAT-POST-ERROR-BIT-COUNT:
162 :ref:`DTV_STAT_POST_TOTAL_BIT_COUNT <DTV-STAT-POST-TOTAL-BIT-COUNT>`.
170 -  ``FE_SCALE_NOT_AVAILABLE`` - it failed to measure it, or the
173 -  ``FE_SCALE_COUNTER`` - Number of error bits counted after the inner
177 .. _DTV-STAT-POST-TOTAL-BIT-COUNT:
184 :ref:`DTV_STAT_POST_ERROR_BIT_COUNT <DTV-STAT-POST-ERROR-BIT-COUNT>`
198 -  ``FE_SCALE_NOT_AVAILABLE`` - it failed to measure it, or the
201 -  ``FE_SCALE_COUNTER`` - Number of bits counted while measuring
202    :ref:`DTV_STAT_POST_ERROR_BIT_COUNT <DTV-STAT-POST-ERROR-BIT-COUNT>`.
205 .. _DTV-STAT-ERROR-BLOCK-COUNT:
211 correction coding (after Reed-Solomon or other outer code).
219 -  ``FE_SCALE_NOT_AVAILABLE`` - it failed to measure it, or the
222 -  ``FE_SCALE_COUNTER`` - Number of error blocks counted after the outer
226 .. _DTV-STAT-TOTAL-BLOCK-COUNT:
228 DTV-STAT_TOTAL_BLOCK_COUNT
232 :ref:`DTV_STAT_ERROR_BLOCK_COUNT <DTV-STAT-ERROR-BLOCK-COUNT>`
236 :ref:`DTV_STAT_ERROR_BLOCK_COUNT <DTV-STAT-ERROR-BLOCK-COUNT>` by
237 :ref:`DTV-STAT-TOTAL-BLOCK-COUNT`.
241 -  ``FE_SCALE_NOT_AVAILABLE`` - it failed to measure it, or the
244 -  ``FE_SCALE_COUNTER`` - Number of blocks counted while measuring
245    :ref:`DTV_STAT_ERROR_BLOCK_COUNT <DTV-STAT-ERROR-BLOCK-COUNT>`.