Lines Matching full:received

45 	#   <op>[,<mode>] rx-add-byte          add a spurious byte to the received CEC message
46 	#   <op>[,<mode>] rx-remove-byte       remove the last byte from the received CEC message
99 received or transmitted message, ``always`` to always trigger the error
103 So '``any rx-nack``' will NACK the next received CEC message,
104 '``any,always rx-nack``' will NACK all received CEC messages and
106 received and do that only for every other received message.
161     otherwise the opcode hasn't been received yet. This tests if the
168     Add a spurious 0x55 byte to the received CEC message, provided
173     Remove the last byte from the received CEC message, provided it
180     As soon as a start bit has been received the CEC adapter will switch
227     the full message received by the remote CEC adapter is
241     must be at least 18, otherwise the opcode hasn't been received yet.
256     must be at least 18, otherwise the opcode hasn't been received yet.
293     hasn't been received yet. This command can be used to test how the receiver
300     the opcode hasn't been received yet. This can be used to test how the
321     position must be at least 18, otherwise the opcode hasn't been received yet.