Lines Matching +full:power +full:- +full:role

2 ChipIdea Highspeed Dual Role Controller Driver
6 -----------------------------------
12 -------------------------
29 	otg-rev = <0x0200>;
30 	adp-disable;
33 -------------------
35 1) Power up 2 Freescale i.MX6Q sabre SD boards with gadget class driver loaded
41    The A-device(with micro A plug inserted) should enumerate B-device.
43 3) Role switch
45    On B-device::
49    B-device should take host role and enumerate A-device.
51 4) A-device switch back to host.
53    On B-device::
57    or, by introducing HNP polling, B-Host can know when A-peripheral wish
58    to be host role, so this role switch also can be trigged in A-peripheral
59    side by answering the polling from B-Host, this can be done on A-device::
63    A-device should switch back to host and enumerate B-device.
65 5) Remove B-device(unplug micro B plug) and insert again in 10 seconds,
66    A-device should enumerate B-device again.
68 6) Remove B-device(unplug micro B plug) and insert again after 10 seconds,
69    A-device should NOT enumerate B-device.
71    if A-device wants to use bus:
73    On A-device::
78    if B-device wants to use bus:
80    On B-device::
84 7) A-device power down the bus.
86    On A-device::
90    A-device should disconnect with B-device and power down the bus.
92 8) B-device does data pulse for SRP.
94    On B-device::
98    A-device should resume usb bus and enumerate B-device.
101 ----------------------
102 "On-The-Go and Embedded Host Supplement to the USB Revision 2.0 Specification
106 --------------------------------------------
112 	echo enabled > /sys/bus/platform/devices/ci_hdrc.0/power/wakeup
116 	echo enabled > /sys/bus/platform/devices/2184000.usb/power/wakeup
120 	echo enabled > /sys/bus/platform/devices/20c9000.usbphy/power/wakeup
124 	echo enabled > /sys/bus/usb/devices/usb1/power/wakeup
128 	echo enabled > /sys/bus/usb/devices/1-1/power/wakeup
133 	for i in $(find /sys -name wakeup | grep usb);do echo enabled > $i;done;