Lines Matching full:dai0
10 digital audio to I2S DAI0, I2S DAI1 or PDM DAI2. This is useful for on SoC DSP
32 PCM0 <------------> * * <----DAI0-----> Codec Headset
53 Example - DPCM Switching playback from DAI0 to DAI1
63 PCM0 <============> * * <====DAI0=====> Codec Headset
80 PCM0 <============> * * <----DAI0-----> Codec Headset
99 3. DPCM runs the PCM trigger(stop), hw_free(), shutdown() operations on DAI0
133 PCM0 <------------> * * <----DAI0-----> Codec Headset
198 This BE DAI link connects DAI0 to the codec (in this case RT5460 AIF1). It sets
208 PCM0 <------------> * * <----DAI0-----> Codec Headset
239 DAI0. This means all FE hw_params have to be fixed in the machine driver for
240 DAI0 so that the DAI is running at desired configuration regardless of the FE
256 /* set DAI0 to 16 bit */
272 /* BE for codec Headset - DAI0 is dummy and managed by DSP FW */
273 {"DAI0 CODEC IN", NULL, "AIF1 Capture"},
274 {"AIF1 Playback", NULL, "DAI0 CODEC OUT"},
297 defined for each BE and each stream direction. e.g for BE DAI0 above we would
301 SND_SOC_DAPM_AIF_IN("DAI0 RX", NULL, 0, SND_SOC_NOPM, 0, 0),
302 SND_SOC_DAPM_AIF_OUT("DAI0 TX", NULL, 0, SND_SOC_NOPM, 0, 0),
316 PCM0 <------------> * * <----DAI0-----> Codec Headset