Lines Matching +full:use +full:- +full:parity
1 .. SPDX-License-Identifier: GPL-2.0
5 Adaptec Aic7xxx Fast -> Ultra160 Family Manager Set v7.0
36 aic7892 20 PCI/64-66 80MHz 16Bit 16 3 4 5 6 7 8
41 aic7899 20 PCI/64-66 80MHz 16Bit 16 2 3 4 5 6 7 8
44 1. Multiplexed Twin Channel Device - One controller servicing two
46 2. Multi-function Twin Channel Device - Two controllers on one chip.
47 3. Command Channel Secondary DMA Engine - Allows scatter gather list
49 4. 64 Byte SCB Support - Allows disconnected, untagged request table
51 5. Block Move Instruction Support - Doubles the speed of certain
53 6. 'Bayonet' style Scatter Gather Engine - Improves S/G prefetch
55 7. Queuing Registers - Allows queuing of new transactions without
57 8. Multiple Target IDs - Allows the controller to respond to selection
61 Controller Chip Host-Bus Int-Connectors Ext-Connectors Notes
63 AHA-274X[A] aic7770 EISA SE-50M SE-HD50F
64 AHA-274X[A]W aic7770 EISA SE-HD68F SE-HD68F
65 SE-50M
66 AHA-274X[A]T aic7770 EISA 2 X SE-50M SE-HD50F
67 AHA-2842 aic7770 VL SE-50M SE-HD50F
68 AHA-2940AU aic7860 PCI/32 SE-50M SE-HD50F
69 AVA-2902I aic7860 PCI/32 SE-50M
70 AVA-2902E aic7860 PCI/32 SE-50M
71 AVA-2906 aic7856 PCI/32 SE-50M SE-DB25F
72 APC-7850 aic7850 PCI/32 SE-50M 1
73 AVA-2940 aic7860 PCI/32 SE-50M
74 AHA-2920B aic7860 PCI/32 SE-50M
75 AHA-2930B aic7860 PCI/32 SE-50M
76 AHA-2920C aic7856 PCI/32 SE-50M SE-HD50F
77 AHA-2930C aic7860 PCI/32 SE-50M
78 AHA-2930C aic7860 PCI/32 SE-50M
79 AHA-2910C aic7860 PCI/32 SE-50M
80 AHA-2915C aic7860 PCI/32 SE-50M
81 AHA-2940AU/CN aic7860 PCI/32 SE-50M SE-HD50F
82 AHA-2944W aic7870 PCI/32 HVD-HD68F HVD-HD68F
83 HVD-50M
84 AHA-3940W aic7870 PCI/32 2 X SE-HD68F SE-HD68F 2
85 AHA-2940UW aic7880 PCI/32 SE-HD68F
86 SE-50M SE-HD68F
87 AHA-2940U aic7880 PCI/32 SE-50M SE-HD50F
88 AHA-2940D aic7880 PCI/32
89 aHA-2940 A/T aic7880 PCI/32
90 AHA-2940D A/T aic7880 PCI/32
91 AHA-3940UW aic7880 PCI/32 2 X SE-HD68F SE-HD68F 3
92 AHA-3940UWD aic7880 PCI/32 2 X SE-HD68F 2 X SE-VHD68F 3
93 AHA-3940U aic7880 PCI/32 2 X SE-50M SE-HD50F 3
94 AHA-2944UW aic7880 PCI/32 HVD-HD68F HVD-HD68F
95 HVD-50M
96 AHA-3944UWD aic7880 PCI/32 2 X HVD-HD68F 2 X HVD-VHD68F 3
97 AHA-4944UW aic7880 PCI/32
98 AHA-2930UW aic7880 PCI/32
99 AHA-2940UW Pro aic7880 PCI/32 SE-HD68F SE-HD68F 4
100 SE-50M
101 AHA-2940UW/CN aic7880 PCI/32
102 AHA-2940UDual aic7895 PCI/32
103 AHA-2940UWDual aic7895 PCI/32
104 AHA-3940UWD aic7895 PCI/32
105 AHA-3940AUW aic7895 PCI/32
106 AHA-3940AUWD aic7895 PCI/32
107 AHA-3940AU aic7895 PCI/32
108 AHA-3944AUWD aic7895 PCI/32 2 X HVD-HD68F 2 X HVD-VHD68F
109 AHA-2940U2B aic7890 PCI/32 LVD-HD68F LVD-HD68F
110 AHA-2940U2 OEM aic7891 PCI/64
111 AHA-2940U2W aic7890 PCI/32 LVD-HD68F LVD-HD68F
112 SE-HD68F
113 SE-50M
114 AHA-2950U2B aic7891 PCI/64 LVD-HD68F LVD-HD68F
115 AHA-2930U2 aic7890 PCI/32 LVD-HD68F SE-HD50F
116 SE-50M
117 AHA-3950U2B aic7897 PCI/64
118 AHA-3950U2D aic7897 PCI/64
119 AHA-29160 aic7892 PCI/64-66
120 AHA-29160 CPQ aic7892 PCI/64-66
121 AHA-29160N aic7892 PCI/32 LVD-HD68F SE-HD50F
122 SE-50M
123 AHA-29160LP aic7892 PCI/64-66
124 AHA-19160 aic7892 PCI/64-66
125 AHA-29150LP aic7892 PCI/64-66
126 AHA-29130LP aic7892 PCI/64-66
127 AHA-3960D aic7899 PCI/64-66 2 X LVD-HD68F 2 X LVD-VHD68F
128 LVD-50M
129 AHA-3960D CPQ aic7899 PCI/64-66 2 X LVD-HD68F 2 X LVD-VHD68F
130 LVD-50M
131 AHA-39160 aic7899 PCI/64-66 2 X LVD-HD68F 2 X LVD-VHD68F
132 LVD-50M
136 2. DEC21050 PCI-PCI bridge with multiple controller chips on secondary bus
137 3. DEC2115X PCI-PCI bridge with multiple controller chips on secondary bus
145 - Updated driver to use SCSI transport class infrastructure
146 - Upported sequencer and core fixes from last adaptec released
150 - Correct code that disables PCI parity error checking.
151 - Correct and simplify handling of the ignore wide residue
155 - Add support for the 2.5.X EISA framework.
156 - Update for change in 2.5.X SCSI proc FS interface.
157 - Correct Domain Validation command-line option parsing.
158 - When negotiation async via an 8bit WDTR message, send
162 - Clear PCI error state during driver attach so that we
168 - Fix a few GCC 3.3 compiler warnings.
169 - Correct operation on EISA Twin Channel controller.
170 - Add support for 2.5.X's scsi_report_device_reset().
173 - Fix locking regression introduced in 6.2.29 that
175 and our per-softc lock. This was only possible on RH9,
179 - Dynamically disable PCI parity error reporting after
182 with bad parity. Once the user has been informed of the
187 - Dynamically sized S/G lists to avoid SCSI malloc
188 pool fragmentation and SCSI mid-layer deadlock.
191 - Domain Validation Fixes
192 - Add ability to disable PCI parity error checking.
193 - Enhanced Memory Mapped I/O probe
196 - Added Domain Validation.
206 USE THEM WITH CAUTION.
242 :Definition: Toggles the detection of PCI parity errors.
244 PCI parity is not generated correctly on the
246 differentiate between these "spurious" parity
247 errors and real parity errors. The symptom of
250 "scsi0: Data Parity Error Detected during address or write data phase"
255 :Default Value: PCI Parity Error reporting is disabled
294 :Possible Values: 1 - 253
299 :Definition: Set the per-target tagged queue depth on a
304 :Possible Values: 1 - 253
315 - specifies a tag depth of 16 for target 0
316 - specifies a tag depth of 64 for target 3
317 - specifies a tag depth of 8 for targets 4 and 5
318 - leaves target 6 at the default
319 - specifies a tag depth of 32 for targets 1,2,7-15
320 - All other targets retain the default depth.
328 - specifies a tag depth of 32 for targets 0 and 2
329 - All other targets retain the default depth.
339 :Definition: Set Domain Validation Policy on a per-controller basis.
346 < 0 Use setting from serial EEPROM.
352 :Default Value: SCSI-Select setting on controllers with a SCSI Select
360 dv:{-1,0,,1,1,0}
362 - On Controller 0 leave DV at its default setting.
363 - On Controller 1 disable DV.
364 - Skip configuration on Controller 2.
365 - On Controllers 3 and 4 enable DV.
366 - On Controller 5 disable DV.
381 - The 12-digit TSID can be found on the white barcode-type label
387 - Search the Adaptec Support Knowledgebase (ASK) at
390 - For support via Email, submit your question to Adaptec's
394 - Visit our Web site at http://www.adaptec.com/.
395 - For information about Adaptec's support options, call
396 408-957-2550, 24 hours a day, 7 days a week.
397 - To speak with a Technical Support Specialist,
399 * For hardware products, call 408-934-7274,
401 * For RAID and Fibre Channel products, call 321-207-2000,
405 - To order Adaptec products, including accessories and cables,
406 call 408-957-7274. To order cables online go to
407 http://www.adaptec.com/buy-cables/.
410 - Visit our Web site at http://www.adaptec.com/en-US/_common/world_index.
411 - To speak with a Technical Support Specialist, call, or email,
413 * German: +49 89 4366 5522, Monday-Friday, 9:00-17:00 CET,
414 http://ask-de.adaptec.com/.
415 * French: +49 89 4366 5533, Monday-Friday, 9:00-17:00 CET,
416 http://ask-fr.adaptec.com/.
417 * English: +49 89 4366 5544, Monday-Friday, 9:00-17:00 GMT,
420 - You can order Adaptec cables online at
421 http://www.adaptec.com/buy-cables/.
424 - Visit our web site at http://www.adaptec.co.jp/.
425 - To speak with a Technical Support Specialist, call
426 +81 3 5308 6120, Monday-Friday, 9:00 a.m. to 12:00 p.m.,
433 You are permitted to redistribute, use and modify this README file in whole
450 WARRANTIES OF NON-INFRINGEMENT OR THE IMPLIED WARRANTIES OF MERCHANTABILITY
454 TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
457 NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS README