Lines Matching +full:fixed +full:- +full:links

1 .. SPDX-License-Identifier: GPL-2.0
10 phylink is a mechanism to support hot-pluggable networking modules
11 directly connected to a MAC without needing to re-initialise the
12 adapter on hot-plug events.
14 phylink supports conventional phylib-based setups, fixed link setups
30 2. Fixed mode
32    Fixed mode is the same as PHY mode as far as the MAC driver is
35 3. In-band mode
37    In-band mode is used with 802.3z, SGMII and similar interface modes,
38    and we are expecting to use and honor the in-band negotiation or
43 .. code-block:: none
47     phy-mode = "sgmii";
50 does not use in-band SGMII signalling.  The PHY is expected to follow
55 .. code-block:: none
58     managed = "in-band-status";
60     phy-mode = "sgmii";
63 uses in-band mode, where results from the PHY's negotiation are passed
77    two parts dealing with link-down and link-up. This can be done as
82    link-up part now includes configuring the MAC for the link settings.
113    .. flat-table::
114     :header-rows: 1
116     :stub-columns: 0
118     * - Original function
119       - Replacement function
120     * - phy_start(phydev)
121       - phylink_start(priv->phylink)
122     * - phy_stop(phydev)
123       - phylink_stop(priv->phylink)
124     * - phy_mii_ioctl(phydev, ifr, cmd)
125       - phylink_mii_ioctl(priv->phylink, ifr, cmd)
126     * - phy_ethtool_get_wol(phydev, wol)
127       - phylink_ethtool_get_wol(priv->phylink, wol)
128     * - phy_ethtool_set_wol(phydev, wol)
129       - phylink_ethtool_set_wol(priv->phylink, wol)
130     * - phy_disconnect(phydev)
131       - phylink_disconnect_phy(priv->phylink)
139    .. code-block:: c
146 		return phylink_ethtool_ksettings_set(priv->phylink, cmd);
154 		return phylink_ethtool_ksettings_get(priv->phylink, cmd);
163 	err = phylink_of_phy_connect(priv->phylink, node, flags);
170    fixed link properties, and will also contain the sfp property.
172    The setup of fixed links should also be removed; these are handled
197    It is important that if in-band negotiation is used,
199    in-band negotiation from completing, since these functions are called
200    when the in-band link state changes - otherwise the link will never
204    and ``state->advertising`` with the supported ethtool link modes.
210    using. This is particularly important for in-band negotiation
211    methods such as 1000base-X and SGMII.
218    tightly integrated, or when the settings are not coming from in-band
233    of_phy_register_fixed_link() for fixed links etc. from the probe
236    .. code-block:: c
239 	priv->phylink_config.dev = &dev.dev;
240 	priv->phylink_config.type = PHYLINK_NETDEV;
242 	phylink = phylink_create(&priv->phylink_config, node, phy_mode, &phylink_ops);
248 	priv->phylink = phylink;
253    .. code-block:: c
255 	phylink_destroy(priv->phylink);
260     .. code-block:: c
262 	phylink_mac_change(priv->phylink, link_is_up);
266     it should set ``priv->phylink_config.pcs_poll = true;`` in step 9.