Lines Matching +full:ports +full:- +full:implemented
22 An Ethernet switch typically comprises multiple front-panel ports and one
23 or more CPU or management ports. The DSA subsystem currently relies on the
27 gateways, or even top-of-rack switches. This host Ethernet controller will
33 ports are referred to as "dsa" ports in DSA terminology and code. A collection
36 For each front-panel port, DSA creates specialized network devices which are
37 used as controlling and data-flowing endpoints for use by the Linux networking
43 Ethernet frame it receives to/from specific ports to help the management
46 - what port is this frame coming from
47 - what was the reason why this frame got forwarded
48 - how to send CPU originated traffic to specific ports
52 on Port-based VLAN IDs).
55 "dsa" ports because:
57 - the "cpu" port is the Ethernet switch facing side of the management
61 - the "dsa" port(s) are just conduits between two or more switches, and as such
63 downstream, or the top-most upstream interface makes sense with that model
66 ------------------------
68 DSA supports many vendor-specific tagging protocols, one software-defined
69 tagging protocol, and a tag-less mode as well (``DSA_TAG_PROTO_NONE``).
74 - identifies which port the Ethernet frame came from/should be sent to
75 - provides a reason why this frame was forwarded to the management interface
82 1. The switch-specific frame header is located before the Ethernet header,
85 2. The switch-specific frame header is located before the EtherType, keeping
88 3. The switch-specific frame header is located at the tail of the packet,
99 accommodate for this extra size in order for DSA user ports to support the
102 on a best-effort basis, the allocation of packets with enough extra space such
106 Even though applications are not expected to parse DSA-specific frame headers,
118 fabric with more than one switch, the switch-specific frame header is inserted
123 data frames might also be autonomously forwarded towards other user ports of
125 ports must decapsulate the packet.
134 EDSA tagging protocol, the operating system sees EDSA-tagged packets from the
143 tree. The DSA links are viewed as simply a pair of a DSA master (the out-facing
144 port of the upstream DSA switch) and a CPU port (the in-facing port of the
155 all attached switch ports must be down while doing this).
165 The passed ``struct sk_buff *skb`` has ``skb->data`` pointing at
171 ports). Typically this is fulfilled by pushing a frame header. Checking for
177 passed ``struct sk_buff *skb`` has ``skb->data`` pointing at
180 method is to consume the frame header, adjust ``skb->data`` to really point at
181 the first octet after the EtherType, and to change ``skb->dev`` to point to the
182 virtual DSA user network interface corresponding to the physical front-facing
214 with DSA-unaware masters, mangling what the master perceives as MAC DA), the
218 Note that this assumes a DSA-unaware master driver, which is the norm.
221 ----------------------
233 ----------------------
238 specific (and fake) Ethernet type (later becoming ``skb->protocol``) with the
246 - receive function is invoked
247 - basic packet processing is done: getting length, status etc.
248 - packet is prepared to be processed by the Ethernet layer by calling
254 if (dev->dsa_ptr != NULL)
255 -> skb->protocol = ETH_P_XDSA
260 -> iterate over registered packet_type
261 -> invoke handler for ETH_P_XDSA, calls dsa_switch_rcv()
265 -> dsa_switch_rcv()
266 -> invoke switch tag specific protocol handler in 'net/dsa/tag_*.c'
270 - inspect and strip switch tag protocol to determine originating port
271 - locate per-port network device
272 - invoke ``eth_type_trans()`` with the DSA slave network device
273 - invoked ``netif_receive_skb()``
279 ---------------------
283 controlling and data-flowing end-point for each front-panel port of the switch.
286 - insert/remove the switch tag protocol (if it exists) when sending traffic
287 to/from specific switch ports
288 - query the switch for ethtool operations: statistics, link state,
289 Wake-on-LAN, register dumps...
290 - manage external/internal PHY: link, auto-negotiation, etc.
306 When using multiple CPU ports, it is possible to stack a LAG (bonding/team)
321 ------------------------
330 +-----------v--|--------------------+
331 |+------+ +------+ +------+ +------+|
333 |+------+-+------+-+------+-+------+|
335 +-----------------------------------+
340 +-----------------------------------+
342 --------+-----------------------------------+------------
344 +-----------------------------------+
349 +-----------------------------------+
351 |+------+ +------+ +------+ +------+|
353 ++------+-+------+-+------+-+------++
356 --------------
360 MDIO reads/writes towards specific PHY addresses. In most MDIO-connected
363 library and/or to return link status, link partner pages, auto-negotiation
372 ---------------
377 - ``dsa_chip_data``: platform data configuration for a given switch device,
379 well as various properties of its ports: names/labels, and finally a routing
382 - ``dsa_platform_data``: platform device configuration data which can reference
387 - ``dsa_switch_tree``: structure assigned to the master network device under
394 - ``dsa_switch``: structure describing a switch device in the tree, referencing
398 - ``dsa_switch_ops``: structure referencing function pointers, see below for a
405 -------------------------------
407 DSA does not currently create slave network devices for the CPU or DSA ports, as
410 - inability to fetch switch CPU port statistics counters using ethtool, which
413 - inability to configure the CPU port link parameters based on the Ethernet
416 - inability to configure specific VLAN IDs / trunking VLANs between switches
420 --------------------------------
422 Once a master network device is configured to use DSA (dev->dsa_ptr becomes
423 non-NULL), and the switch behind it expects a tagging protocol, this network
435 - MDIO/PHY library: ``drivers/net/phy/phy.c``, ``mdio_bus.c``
436 - Switchdev:``net/switchdev/*``
437 - Device Tree for various of_* functions
438 - Devlink: ``net/core/devlink.c``
441 ----------------
447 - internal PHY devices, built into the Ethernet switch hardware
448 - external PHY devices, connected via an internal or external MDIO bus
449 - internal PHY devices, connected via an internal MDIO bus
450 - special, non-autonegotiated or non MDIO-managed PHY devices: SFPs, MoCA; a.k.a
456 - if Device Tree is used, the PHY device is looked up using the standard
457 "phy-handle" property, if found, this PHY device is created and registered
460 - if Device Tree is used and the PHY device is "fixed", that is, conforms to
461 the definition of a non-MDIO managed PHY as defined in
462 ``Documentation/devicetree/bindings/net/fixed-link.txt``, the PHY is registered
465 - finally, if the PHY is built into the switch, as is very common with
471 ---------
475 of per-port slave network devices. As of today, the only SWITCHDEV objects
479 -------
482 For each devlink device, every physical port (i.e. user ports, CPU ports, DSA
483 links or unused ports) is exposed as a devlink port.
487 - Regions: debugging feature which allows user space to dump driver-defined
488 areas of hardware information in a low-level, binary format. Both global
489 regions as well as per-port regions are supported. It is possible to export
491 to the standard iproute2 user space programs (ip-link, bridge), like address
493 contain additional hardware-specific details which are not visible through
495 the non-user ports too, which are invisible to iproute2 because no network
497 - Params: a feature which enables user to configure certain low-level tunable
499 devlink params, or may add new device-specific devlink params.
500 - Resources: a monitoring feature which enables users to see the degree of
502 - Shared buffers: a QoS feature for adjusting and partitioning memory and frame
504 directions, such that low-priority bulk traffic does not impede the
505 processing of high-priority critical traffic.
510 -----------
515 per-port PHY specific details: interface connection, MDIO bus location, etc.
524 -----------------------------------------
535 - ``ds->dev``: will be used to parse the switch's OF node or platform data.
537 - ``ds->num_ports``: will be used to create the port list for this switch, and
540 - ``ds->ops``: a pointer to the ``dsa_switch_ops`` structure holding the DSA
543 - ``ds->priv``: backpointer to a driver-private data structure which can be
547 be configured to obtain driver-specific behavior from the DSA core. Their
550 - ``ds->vlan_filtering_is_global``
552 - ``ds->needs_standalone_vlan_filtering``
554 - ``ds->configure_vlan_while_not_filtering``
556 - ``ds->untag_bridge_pvid``
558 - ``ds->assisted_learning_on_cpu_port``
560 - ``ds->mtu_enforcement_ingress``
562 - ``ds->fdb_isolation``
574 The first N-1 callers of ``dsa_register_switch()`` only add their ports to the
575 port list of the tree (``dst->ports``), each port having a backpointer to its
576 associated switch (``dp->ds``). Then, these switches exit their
578 has determined that the tree is not yet complete (not all ports referenced by
581 continuation of initialization (including the call to ``ds->ops->setup()``) for
586 which removes a switch's ports from the port list of the tree. The entire tree
608 --------------------
610 - ``get_tag_protocol``: this is to indicate what kind of tagging protocol is
617 - ``change_tag_protocol``: when the default tagging protocol has compatibility
623 - ``setup``: setup function for the switch, this function is responsible for setting
628 a Port-based VLAN ID for each port and allowing only the CPU port and the
629 specific port to be in the forwarding vector. Ports that are unused by the
637 - ``port_setup`` and ``port_teardown``: methods for initialization and
638 destruction of per-port data structures. It is mandatory for some operations
646 - ``port_change_master``: method through which the affinity (association used
648 changed. By default all user ports from a tree are assigned to the first
650 the user ports of a tree are all assigned to the same CPU port, except for H
655 master->dsa_ptr``. Additionally, the master can also be a LAG device where
657 valid ``master->dsa_ptr`` pointer, however this is not unique, but rather a
660 separately for the physical CPU ports associated with the physical DSA
665 -------------------------------
667 - ``get_phy_flags``: Some switches are interfaced to various kinds of Ethernet PHYs,
670 should return a 32-bit bitmask of "flags" that is private between the switch
673 - ``phy_read``: Function invoked by the DSA slave MDIO bus when attempting to read
676 status, auto-negotiation results, link partner pages, etc.
678 - ``phy_write``: Function invoked by the DSA slave MDIO bus when attempting to write
682 - ``adjust_link``: Function invoked by the PHY library when a slave network device
687 - ``fixed_link_update``: Function invoked by the PHY library, and specifically by
689 not be auto-negotiated, or obtained by reading the PHY registers through MDIO.
691 MoCA or other kinds of non-MDIO managed PHYs where out of band link
695 ------------------
697 - ``get_strings``: ethtool function used to query the driver's strings, will
700 - ``get_ethtool_stats``: ethtool function used to query per-port statistics and
705 - ``get_sset_count``: ethtool function used to query the number of statistics items
707 - ``get_wol``: ethtool function used to obtain Wake-on-LAN settings per-port, this
709 Wake-on-LAN settings if this interface needs to participate in Wake-on-LAN
711 - ``set_wol``: ethtool function used to configure Wake-on-LAN settings per-port,
714 - ``set_eee``: ethtool function which is used to configure a switch port EEE (Green
717 controller and data-processing logic
719 - ``get_eee``: ethtool function which is used to query a switch port EEE settings,
721 and data-processing logic as well as query the PHY for its currently configured
724 - ``get_eeprom_len``: ethtool function returning for a given switch the EEPROM
727 - ``get_eeprom``: ethtool function returning for a given switch the EEPROM contents
729 - ``set_eeprom``: ethtool function writing specified data to a given switch EEPROM
731 - ``get_regs_len``: ethtool function returning the register length for a given
734 - ``get_regs``: ethtool function returning the Ethernet switch internal register
735 contents. This function might require user-land code in ethtool to
736 pretty-print register values and registers
739 ----------------
741 - ``suspend``: function invoked by the DSA platform device when the system goes to
742 suspend, should quiesce all Ethernet switch activities, but keep ports
743 participating in Wake-on-LAN active as well as additional wake-up logic if
746 - ``resume``: function invoked by the DSA platform device when the system resumes,
747 should resume all Ethernet switch activities and re-configure the switch to be
750 - ``port_enable``: function invoked by the DSA slave network device ndo_open
756 - ``port_disable``: function invoked by the DSA slave network device ndo_close
763 -----------------
772 For example, all ports that belong to a VLAN-unaware bridge (which is
773 *currently* VLAN-unaware) are expected to learn source addresses in the
775 VLAN-unaware bridges). During forwarding and FDB lookup, a packet received on a
776 VLAN-unaware bridge port should be able to find a VLAN-unaware FDB entry having
780 a port which is a member of a different VLAN-unaware bridge (and is therefore
783 Similarly, each VLAN of each offloaded VLAN-aware bridge should have an
784 associated address database, which is shared by all ports which are members of
785 that VLAN, but not shared by ports belonging to different bridges that are
788 In this context, a VLAN-unaware database means that all packets are expected to
790 VLAN-aware database means that packets are supposed to match based on the VLAN
793 At the bridge layer, VLAN-unaware FDB entries have the special VID value of 0,
794 whereas VLAN-aware FDB entries have non-zero VID values. Note that a
795 VLAN-unaware bridge may have VLAN-aware (non-zero VID) FDB entries, and a
796 VLAN-aware bridge may have VLAN-unaware FDB entries. As in hardware, the
811 DSA (cascade) and CPU ports are also called "shared" ports because they service
828 - Primary unicast MAC addresses of ports (``dev->dev_addr``). These are
833 - Secondary unicast and multicast MAC addresses of ports (addresses added
837 - Local/permanent bridge FDB entries (``BR_FDB_LOCAL``). These are the MAC
838 addresses of the bridge ports, for which packets must be terminated locally
842 - Static bridge FDB entries installed towards foreign (non-DSA) interfaces
843 present in the same bridge as some DSA switch ports. These are also
846 - Dynamically learned FDB entries on foreign interfaces present in the same
847 bridge as some DSA switch ports, only if ``ds->assisted_learning_on_cpu_port``
854 - ``DSA_DB_PORT``: the FDB (or MDB) entry to be installed or deleted belongs to
855 the port private database of user port ``db->dp``.
856 - ``DSA_DB_BRIDGE``: the entry belongs to one of the address databases of bridge
857 ``db->bridge``. Separation between the VLAN-unaware database and the per-VID
859 - ``DSA_DB_LAG``: the entry belongs to the address database of LAG ``db->lag``.
863 ``port_mdb_add`` etc should declare ``ds->fdb_isolation`` as true.
865 DSA associates each offloaded bridge and each offloaded LAG with a one-based ID
867 refcounting addresses on shared ports. Drivers may piggyback on DSA's numbering
868 scheme (the ID is readable through ``db->bridge.num`` and ``db->lag.id`` or may
874 drivers even if they do not support FDB isolation. However, ``db->bridge.num``
875 and ``db->lag.id`` are always set to 0 in that case (to denote the lack of
881 for incorrect forwarding decisions. In this case, all standalone ports may
882 share the same database, but the reference counting of host-filtered addresses
893 ------------
896 below. They may be absent, return -EOPNOTSUPP, or ``ds->max_num_bridges`` may
897 be non-zero and exceeded, and in this case, joining a bridge port is still
898 possible, but the packet forwarding will take place in software, and the ports
912 switch ports part of the same tree ID to be part of the same bridge forwarding
918 bridge device's transmit function to potentially multiple egress ports (and
922 packets and have ``skb->offload_fwd_mark`` set to true in the tag protocol
932 VLAN-unaware, and in this case the FID must be equal to the FID used by the
933 driver for its VLAN-unaware address database associated with that bridge.
934 Alternatively, the bridge may be VLAN-aware, and in that case, it is guaranteed
935 that the packet is also VLAN-tagged with the VLAN ID that the bridge processed
937 the egress-untagged ports, or keep the tag on the egress-tagged ones.
939 - ``port_bridge_join``: bridge layer function invoked when a given switch port is
946 - ``port_bridge_leave``: bridge layer function invoked when a given switch port is
951 - ``port_stp_state_set``: bridge layer function invoked when a given switch port STP
955 - ``port_bridge_flags``: bridge layer function invoked when a port must
958 standalone ports with address learning disabled and egress flooding of all
966 - ``port_fast_age``: bridge layer function invoked when flushing the
973 ---------------------
975 - ``port_vlan_filtering``: bridge layer function invoked when the bridge gets
977 be done at the hardware level, this callback does not need to be implemented.
985 - ``port_vlan_add``: bridge layer function invoked when a VLAN is configured
990 (``bridge vlan add dev br0 vid 100 self``). VLANs on shared ports are
994 - ``port_vlan_del``: bridge layer function invoked when a VLAN is removed from the
997 - ``port_fdb_add``: bridge layer function invoked when the bridge wants to install a
1002 - ``port_fdb_del``: bridge layer function invoked when the bridge wants to remove a
1007 - ``port_fdb_dump``: bridge bypass function invoked by ``ndo_fdb_dump`` on the
1009 hardware FDB entries with the software bridge, this method is implemented as
1010 a means to view the entries visible on user ports in the hardware database.
1014 - ``port_mdb_add``: bridge layer function invoked when the bridge wants to install
1019 - ``port_mdb_del``: bridge layer function invoked when the bridge wants to remove a
1025 ----------------
1027 Link aggregation is implemented in the Linux networking stack by the bonding
1030 supports the feature, and supports bridging between physical ports and LAGs,
1032 ports constitutes a logical port, although DSA has no explicit concept of a
1034 bridge are treated as if all individual physical ports that are members of that
1042 - ``port_lag_join``: function invoked when a given switch port is added to a
1043 LAG. The driver may return ``-EOPNOTSUPP``, and in this case, DSA will fall
1046 - ``port_lag_leave``: function invoked when a given switch port leaves a LAG
1048 - ``port_lag_change``: function invoked when the link state of any member of
1050 of the subset of physical LAG member ports that are up.
1053 can optionally populate ``ds->num_lag_ids`` from the ``dsa_switch_ops::setup``
1057 IEC 62439-2 (MRP)
1058 -----------------
1062 implemented as a function of the bridge driver. MRP uses management PDUs
1073 necessary for the hardware, even if it is not MRP-aware, to be able to extract
1075 implementation. DSA today has no driver which is MRP-aware, therefore it only
1079 - ``port_mrp_add`` and ``port_mrp_del``: notifies driver when an MRP instance
1082 - ``port_mrp_add_ring_role`` and ``port_mrp_del_ring_role``: function invoked
1087 IEC 62439-3 (HSR/PRP)
1088 ---------------------
1093 eliminating the duplicates at the receiver. The High-availability Seamless
1095 the redundant traffic are aware of the fact that it is HSR-tagged (because HSR
1100 In Linux, both HSR and PRP are implemented in the hsr driver, which
1101 instantiates a virtual, stackable network interface with two member ports.
1104 of RedBox and QuadBox are not implemented (therefore, bridging a hsr network
1109 ``Documentation/networking/netdev-features.rst``. Additionally, the following
1110 methods must be implemented:
1112 - ``port_hsr_join``: function invoked when a given switch port is added to a
1113 DANP/DANH. The driver may return ``-EOPNOTSUPP`` and in this case, DSA will
1116 - ``port_hsr_leave``: function invoked when a given switch port leaves a
1123 -------------------------------------------------------------