Lines Matching full:database

766 of them are active at the same time. An address database is the subset (partition)
768 lookup on TX) depending on the state of the port. An address database may
774 database associated by the driver with that bridge (and not with other
781 associated with a different address database).
784 associated address database, which is shared by all ports which are members of
788 In this context, a VLAN-unaware database means that all packets are expected to
790 VLAN-aware database means that packets are supposed to match based on the VLAN
802 use a separate database called a port private database. This is different from
808 database should be empty in a naive implementation, and in this case, all
812 multiple address databases, and the database that a packet should be associated
815 classified by hardware in one address database), and from a bridge port (which
816 were classified to a different address database).
829   associated with the port private database of the respective user port,
835   with the port private database of the respective user port.
839   and not forwarded. They are associated with the address database for that
844   associated with the address database for that bridge.
848   is set to true by the driver. These are associated with the address database
855   the port private database of user port ``db->dp``.
857   ``db->bridge``. Separation between the VLAN-unaware database and the per-VID
859 - ``DSA_DB_LAG``: the entry belongs to the address database of LAG ``db->lag``.
882 share the same database, but the reference counting of host-filtered addresses
933 driver for its VLAN-unaware address database associated with that bridge.
998   Forwarding Database entry, the switch hardware should be programmed with the
999   specified address in the specified VLAN Id in the forwarding database
1003   Forwarding Database entry, the switch hardware should be programmed to delete
1005   this port forwarding database
1010   a means to view the entries visible on user ports in the hardware database.
1015   a multicast database entry. The switch hardware should be programmed with the
1016   specified address in the specified VLAN ID in the forwarding database
1020   multicast database entry, the switch hardware should be programmed to delete
1022   this port forwarding database.