Lines Matching refs:VLAN
71 unintended traffic streams, configure all SR-IOV enabled ports for VLAN tagging
75 See "Configuring VLAN Tagging on SR-IOV Enabled Adapter Ports" later in this
517 Configuring VLAN Tagging on SR-IOV Enabled Adapter Ports
519 To configure VLAN tagging for the ports on an SR-IOV enabled adapter, use the
520 following command. The VLAN configuration should be done before the VF driver
521 is loaded or the VM is booted. The VF is not aware of the VLAN tag being
523 VLAN" mode).
529 For example, the following will configure PF eth0 and the first VF on VLAN 10::
607 Next, add a VLAN interface on the VF interface. For example::
612 VLAN interface does not matter (you can do either first). The result in this
613 example is that the VF will get all traffic that is tagged with VLAN 100.
637 MAC and VLAN Anti-Spoofing Feature for VFs
717 the VLAN priority tag (802.1p) to filter traffic. That means that there are 8
840 The IEEE 802.1ad standard, informally known as QinQ, allows for multiple VLAN
841 IDs within a single Ethernet frame. VLAN IDs are sometimes referred to as
842 "tags," and multiple VLAN IDs are thus referred to as a "tag stack." Tag stacks
844 VLAN ID, among other uses.
848 - Receive checksum offloads and VLAN acceleration are not supported for 802.1ad
851 - 0x88A8 traffic will not be received unless VLAN stripping is disabled with
862 1) The VF is not assigned a port VLAN.
866 - The VF may not receive all network traffic based on the Inner VLAN header
875 Where "24" and "371" are example VLAN IDs.